To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.
Features:
Specs:
The JackRabbit retractable hard tonneau cover protects your cargo and truck bed from the elements. Its durable ArmorTek construction consists of a vinyl fabric top sheet that is bonded to rigid aluminum panels, combining the seamless appearance of a soft tonneau with the security features of a hard tonneau. The stylish cover locks at any point along the rails, and it retracts easily with the turn of a handle.
The original JackRabbit retracts with the turn of a handle. The handle - located on the key latch at the tailgate end of the cover - activates a heavy-duty tension spring. This spring automatically retracts the cover into the canister at the bulkhead of your truck bed. A built-in pull strap helps you extend the cover over your bed. As you pull, the tonneau will engage the side rails at 12" intervals. You can stop the cover at these designated intervals or you can use the key latch to lock the cover at any point along the side rails.
This feature enables you to carry tall or long items that overlap your tailgate while still covering cargo, such as a toolbox, stored closer to the bulkhead of the truck.
A hook-and-loop fastener strip is included to secure the pull strap up and off of your bed floor. You can also use the rear plate of the tonneau cover to pull it closed.
The cover retracts into a compact, angled canister located at the front of your truck bed. This canister protects the retracted cover from the elements, and with the cover stored in the canister you'll have unrestricted visibility out of your rear window. The angled design of the canister also allows for maximum clearance for your tools and cargo so there is no need to remove the cover to haul cargo.
The JackRabbit rails feature a water management system that channels excess water into the canister. This prevents water from getting into your bed or freezing in your tonneau cover rails during cold temperatures. Drain tubes attached to the bottom of the canister remove water through the OE drain holes in the floor of your truck bed.
The black powder-coated side rails mount level with your truck bed rails for a flush appearance. This flush-mount design is aerodynamic to reduce wind drag, and it helps to improve gas mileage when the cover is closed.
Even with the flush-mount design, the cover fits over most fifth-wheel trailer hitches. Note: The highest point of the fifth-wheel hitch must be at least 2" below the bed rails.
The JackRabbit deck is constructed of a vinyl top layer bonded to heavy-duty aluminum slats. This ArmorTek deck looks like a soft tonneau cover with no visible seams, but has the strength and security of a hard tonneau cover. Furthermore, the side rails and canister have a matte black finish that resemble bed caps to give your tonneau cover a more OE appearance. A large seal at the rear of the bed closes the gap between the cover and tailgate to create a barrier to prevent water from entering the truck bed.
The Jackrabbit provides excellent protection for your cargo when used in conjunction with a closed and locked tailgate. The heavy-gauge aluminum panels are better at preventing theft when compared with soft covers that can be cut or punctured with a knife. The panels are also more effective at preventing theft than tri-fold hard tonneau covers because the panels cannot be pried open at any point along the rails.
To install the cover, set the canister in your truck bed and support it with a box or other sturdy object. Slide the cover side rails into the canister until they are fully seated in the rail grips while also threading the cover into the channels in the rails. Secure the rails to the canister with bolts and washers.
Secure the rails to your truck bed side rails using 2 clamps per side. Slide the clamp onto the rail, flip the pivot arm up so it is under the bed rail lip, and tighten the clamp in place. Shims are included for trucks with tapered beds.
Mount the top cover plate to the canister with the included hardware. Attach the drain tubes to the canister and route each tube out of the OEM drain holes in the floor of your bed.
To hold the pull strap off the floor of your truck bed, apply the adhesive hook-and-loop fastener strip onto the underside of a rail at your desired location.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
Mack
8/8/2025
Had an issue with cover ping out but called costumer support and they were great. He reminded me to check the fasteners and he was spot on. Tighten up and cured my issues. Would buy it again. Love the look and operation.
Jon
7/15/2026
Bed cover is still working great after a year. Only downside is the amount of space that it takes up in the bed.
Lazer S.
10/14/2025
Good choice with the JackRabbit, Howard! I've had one on my Silverado since 2018 and it's still holding up quite well. One piece of advice though, don't shove something like a bookcase into it when it isn't opened up all the way. I sorta kinda maybe did that and have to finesse it to get it completely open now. It still works though. : P I have heard they can be a bit of a pain to install, but I had our installers handle that. So I guess I cheated a little. What are you keeping in your bed?
James
5/16/2025
Still looks and works great. The rubber seal at the rear is easy to knock out of the track, Ive done it three or four times now, and it is a little bit of a pain to get it back in the track. I may RTV it in place. The truck rarely sees rain, Ive road tripped it to Colorado twice, Texas once, and Phoenix once with this tonneau on. Everything in the bed stayed dry and clean. I caught snow twice on those road trips, once in Steamboat and once in Flagstaff. Usually if the truck is not on the road it lives in the garage, but it did spend two months outside this winter when I had two dailies breakdown, washed it and Armoralled it and it looks good as new again.
Larry
6/7/2024
Still good, but tough to keep it sliding smoothly, it leaks a lot fore and aft, has a tendency to be hard to unlock binds on the passenger side, but still gets out of the way for the fifth wheel, covers front part of bed while towing, and still looks great. I am not aware of a better product that will do what I need and fix the issues I have with this one.
Kevin C.
6/7/2024
Mike L.
10/1/2026
Please let us know how you like it, Dale!
Do you have a question about this Tonneau Cover?
Condition: Surface Scratches
Notes: Item has cosmetic scratches and does not include the rail.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Greg
11/27/2025
Great, this is my second Tonneau cover from etrailer. The first cover was sold on a 2021 Ram and my Second tonneau cover is on a 2024 Chevy Silverado 3500 that currently up for sale. Both covers worked flawlessly.