Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2002 Chrysler PT Cruiser
We'll connect you with nearby partnered installers who know this exact setup.
BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish
Part Number: BAK44AV
In Stock
$1,249.99
Retail:$1,349.99
You Save: $100.00
2002 Chrysler PT Cruiser
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (148)
- Q & A (0)
- Photos
BAK Industries Tonneau Cover - BAK44AV
Highlights
- Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
- Hard Cover Keeps Everything Out: Lock tailgate and panels for secure, weather-tight storage.
- Full Bed Access: Tri-fold design flips up or folds for open-bed hauling.
- Strong Aluminum Build: 1/2" thick rustproof panels hold up to 400 lbs evenly distributed.
- Keeps Gear Dry: Matte seals and drainage channels route water away from the bed.
- Clean, Low-Profile Look: Flush fit and matte finish match truck lines and resist UV damage.
Features to know about
Full Bed Access: Tri-Fold Aluminum Design
Hauling taller gear doesn’t mean you have to remove your cover. The MX4 folds in three sections so you can open just part of the bed or flip it all the way up against the cab. Prop rods lock it upright so you can drive with the bed completely open. With the panels folded down, it sits low inside the bed rails for a clean, flush look and full use of stake pockets and tie-downs.
Everyday Protection: 1/2" Thick, Rustproof Aluminum Panels
The MX4 is built for daily work and weekend use. Its 1/2" thick aluminum panels are rustproof and backed by a premium-density foam core for added strength. The cover is rated to hold up to 400 lbs of evenly distributed weight, so it stands up to heavy snow or gear without sagging. The matte black finish resists scratches, scuffs, and UV damage, keeping it looking sharp over the long haul.
Keep Cargo Dry: Seals and Drainage System
Rain, snow, or car wash—your cargo stays protected. Matte black rubber seals and a built-in drainage system direct water away from the bed. A rear seal lets you open and close the tailgate whether the cover is up or down, and when the tailgate is locked, the automatically latching panels keep everything inside secure.
Simple Setup: Clamp-On, No-Drill Installation
Getting it installed is straightforward. The aircraft-grade aluminum rails clamp to the inside of the bed rails—no drilling required. Bolts secure the front hinge rail to the frame rails so everything stays aligned and solid. The finished setup is low-profile, aerodynamic, and ready to pair with compatible rack systems or a BakBox2 (sold separately).
Specs
Weight and Capacity
- Weight Capacity: Up to 400 lbs of evenly distributed weight
Construction
- Panel Material: 1/2" thick, rustproof aluminum
- Panel Finish: Matte black, resistant to scratches, scuffs, and UV rays
- Core: Premium density foam
- Rail Material: Aircraft-grade, rustproof aluminum
- Rail Finish: Black powder coat
Design and Style
- Cover Type: Tri-fold, hard folding design
- Profile: Low-profile, sits inside truck bed rails
- Aerodynamics: Aerodynamic style reduces wind drag
- Finish: Matte black
Functionality
- Operation: Allows partial or full bed access without removal
- Locking System: Automatically latching panels secure when tailgate closed and locked
- Tailgate Compatibility: Tailgate opens and closes with cover up or down
- Prop Rods: Secure folded cover in upright position for full bed access
- Buckle System: Integrated buckles secure cover in folded, flipped up, or closed position
- Seals: Matte black rubber seals with built-in drainage system
- Rear Seal: Allows tailgate operation with cover open or closed
Installation
- Installation Type: No-drill
- Attachment: Frame rails clamp to inside of bed rails
- Front Hinge Rail: Secured with included bolts
- Accessory Compatibility: Compatible with stake-pocket-mounted accessories and raised side rails
- BakBox2 Compatibility: Compatible (sold separately)
Origin and Warranty
- Made in: USA
- Warranty: 5-Year warranty
448539 BAK Industries BAK Flip MX4 Hard Folding Truck Bed Cover
This Product Fits The Following Vehicles
- 2022 - 2027 Nissan Frontier 6 Foot Bed
Ratings & Reviews
4.6
148 reviews
by:
John B
07/12/2026
I love how this tonneau cover works. because it allows use of almost the entire bed of the truck when it's fully open. I was a little disappointed with the clamps for installing the side rails, as they didn't seem as robust as the clamps in the cover I bought for my last truck. However, I am happy with its operation, and the fact that the truck bed is a locked compartment when I lock the tailgate.
by:
Gordon
05/21/2025
2022
Ford
F-350 Super Duty
Bought it used.. I asked if it was complete undamaged.. It arrived complete including a scratch on the inside cover.. I'm glad it wasn't on the outside cover. Shipping was quick. Installation was fairly straight forward
by:
Doug
12/31/2025
Ordered the BAKFlip MX4 for my son on 12/15 after calling to verify the tonneau would arrive by Christmas. Then received an email that said "Your order has been forwarded to one of our partners for direct shipment to you" and never received another shipping update or any tracking info. Finally on 12/22 I emailed Etrailer.com who told me they didn't know when I would get it. The Tonneau finally arrived on 12/29, 3 days after my son returned to California (he drove his truck, 2100 miles). He won't be back till next Christmas so I have to figure out how to return this product. I had several other buying options to get this here by Christmas, but went with Etrailer because of their reputation. This will be my last purchase from Etrailer.com.
by:
David
04/10/2022
Overall, I am very pleased with my BAKFlip MX4. It has held up well after 1 year. It works well and looks good. It matches my matte black accessories and trim. It was fairly easy to assemble but I did have some tight fitment issues near the cab where the cover connects to the rail. I really like the security of the hardtop and access through the tailgate. Water is generally kept out, but sometimes there are water drips near the tailgate depending on the angle parked. So this cover keeps the bed *mostly* dry.
etrailer was very fast to deliver my cover, and it came in good condition.
etrailer was very fast to deliver my cover, and it came in good condition.
by:
Christopher
12/09/2025
The bed cover has been great so far. Followed the instructions and took my time adjusting it and it has been working well. Keeps the bed dry and looks good. I did have to order an extra kit to get enough rail clamps. Once I put the extra clamps on it feels much more secure. For 8ft beds they need atleast 8 to 10 clamps, not 6. The cover has been working in that I don’t have to uncover the whole bed to use it. I just need to open up as much as I need at the time.
by:
Chris B.
09/26/2020
So after a year I am still loving this bed cover. Had the fiberglass version for my 2013 F-150 and loved it as well, that's why I purchased this one for my 2019 Super Duty, it was also the first accessory I purchased for it because I was so used to my other one and knew I couldn't live without it. I never installed the drain tubes on either covers and still haven't had water get it my bed. Also the folks at etrailer are always awesome! Thanks again!
by:
Pete
11/14/2025
Pontiac
Trans Sport Van
BAKFlip MX4 is a great addition to any pickup. It allows for secure transport of material, keeping it dry in bad weather and yet readily accessible with the flip of a panel. It also keeps the weather away from your 5th wheel hitch. Can be left on when towing.
by:
Justin
04/23/2024
I have been using this cover for almost a year now, and am very pleased with it. It looks and fits great, and it is secure and keeps most of the bed dry in the rain. A couple of rubber trip bits have needed some improved securing, and I used a little RTV so it was easy. I drove it across the country round trip last summer and it was perfect. I would recommend this cover for a great-looking and pretty secure cover. Finally, it is easy to fold forward when it is time to haul loads taller than the bed rails.
by:
Rob
06/02/2024
Purchased this BAKFlip for my new 22 RAM Classic 1500. Installation went well, instructions were good to follow, and it fit perfectly. One of the plastic hold down clips had a manufacturer defect with excess plastic mold residue inside the clip that prevented it from properly working. I sent an online warranty claim explaining the problem, and a new clip was sent to me in a reasonable amount of time, and it worked fine. After one year of using the cover, I am very happy with it. Everything functions as it should, and it is very versatile. While it is not 100% watertight, I mostly notice a small amount of leakage around the tailgate seal after washing the truck. Under normal rainy weather, there is no leakage, and we get plenty of rain in the PNW. My four-star rating rather than a 5 star is only because of the manufacturer defect and the curling of one of the rubber cushions on the underside of one of the panels where the adhesive holding it on the edges has not held up under the hot weather (with the black color, when the sun beats down on the cover it gets pretty toasty inside the truck bed with the cover closed). I am thinking that should be an easy fix by applying some good adhesive and taping in place until the adhesive cures. Just haven't gotten around to doing it. Again, really like this cover. Would recommend it to others, and if I ever have a need for one in the future, would definitely not hesitate getting another BAKflip.
Rob
6/4/2025
The BAKFlip after 2 years is still functioning great. I fixed the curling cushion by applying some strong adhesive to the spots that had detached, taped it in place and let cure for a couple of days. That solved that issue. Would continue to recommend the BAKFlip to others.
by:
Michael
03/29/2026
Great tonneau cover. Fits as it should.
by:
Tianhe
03/26/2018
2017
Dodge
Ram Pickup
I installed the BAKFlip MX4 in my RAM 2500 Crewcab has the 6' 1/2 short bed, drived 300 miles now. good product, open and close the tailgate without lifting up the cover
by:
Gene
03/05/2026
dodge
Ram Pickup
Great fit on a Ram 2500 long bed. Everything stays dry on the inside.
by:
Jason V
02/28/2023
The cover functions ok. The tailgate leaks quite a bit. The manufactured edges that where cut were sharp and not painted or treated. The weather strip along the edges has already discolored/faded. Disappointed in the fading and less than ideal sharp edges. Somewhat expected leaks, but not this much. Average at best rating, especially for the price.
by:
Mike M.
11/21/2020
I am a huge fan of the BAKFlip. The installation was pretty straight forward and easy. Anybody with moderate mechanical ability can install. I think it took less than 2 hours. I live in a heavy snow area and had more than 24” of snow on it at one point and the product performed flawlessly.
by:
Greg
05/23/2026
Excellent product! Wait time was crazy but manufacturer is to blame on that one!
by:
Douglas
08/29/2025
I replace a camper shell with the tonneau cover because it is easier to remove when I want to put my pickup camper on the pickup. I am very happy with the cover and am glad I made the switch.
by:
Dean
04/21/2021
the bedcover finally came in.
Few pictures of it installed.
Few pictures of it installed.
by:
James
07/22/2020
I really love the bakFlip cover. It locks up all my stuff when we are on the road. I really like the looks too.
by:
Robert
09/05/2025
I own three of these on three different trucks. The two I purchased this year and last year are not as good quality as the one I purchased in 2023.For the price they are feeling pretty cheap now and parts are falling off. Latch covers and rubber par to rest the top on when folded up have fallen off on both of the covers. I will not be buying these brand covers again.
by:
Mike
03/24/2022
Solid performance. Only issue is with the glue holding the pads is failing
Jenny N.
4/4/2022
You mentioned that the glue holding the pads are failing. I wanted to see if you would be able to send a picture to show the locations.
by:
Sherry H
05/16/2019
Love the MX4 ...Took a little longer to install but looks great...
Sherry H.
5/19/2020
Its still amazing. Works just like its suppose to glad I made the purchase.
by:
Jason
10/17/2022
I have owned this cover for over a year and it has been excellent. It keeps the bed fairly dry as expected and I have had no mechanical issues with it as it still performs like new. I would say the only improvement I would suggest is better foam weather striping for the front of the bed as the original never stuck to the spray in liner very well and eventually came lose and then I just swapped with some similar weather striping I bought locally.
Jason
12/11/2023
The cover is still excellent and keeps our items dry and secure on those road trips. I stand by my initial review and still wish the weatherstripping would stick the the spray in liner better but its only been a minor annoyance that hasnt resulted in any water getting into the bed.
by:
William
07/09/2022
The cover has been great. I would buy it again. The only gripe from me is that for some unknown reason, one screw rusted ( as shown in the attached photo ). Why one, and not the other 3 ?? who knows...
by:
Martin Zebzda
09/19/2017
2017
Ford
F-250 Super Duty
It's a straight forward assembly but photos of the assembly steps would be better than the illustrations.
NOTE: This model allows you to open and close the tailgate without lifting up the cover. The other models require you to lift the cover so the tailgate won't damage it.
NOTE: This model allows you to open and close the tailgate without lifting up the cover. The other models require you to lift the cover so the tailgate won't damage it.
Martin Z.
9/19/2018
Great cover holds up really well, no problems
25
148
true
Show More Reviews
See what our Experts say about this BAK Industries Tonneau Cover
- Will a BAKFlip MX4 Tonneau Cover Work w/ the Uni-Track Rail System on a 2024 Nissan Frontier?Yes, it will Chris and welcome back. The BAKFlip MX4 Hard Tonneau Cover item # BAK44AV is indeed compatible with the Uni-Track rail system on the 2024 Nissan Frontier. This model fits the 6' bed. If your truck has a 5' bed, you'll need item # BAK94AV. The mounting kits included with these covers include brackets for the rail system. If you have any additional questions, go ahead and click on the box that says Add Comment and I'll be happy to answer them.
view full answer... - Compatibility of Ladder Rack With BAKFlip MX4 on 2024 Nissan FrontierThe TruXedo Elevate Truck Bed Rack System # TX46NV is what I recommend for your 2024 Nissan Frontier. The Elevate rack mounts on the TS rails which allow you to use a tonneau cover like the BAKFlip MX4 # BAK44AV. This is a sliding rack with a height of 18" or 28" and a weight capacity of 500 lbs on the road. It also comes with a limited lifetime warranty.
view full answer... - Ladder Rack Compatible With BAKFlip MX4 Tonneau Cover on 2022 Nissan FrontierIt sounds like you have the crew cab since a double cab is not an option for the 2022 Frontier. For a ladder rack that is compatible with the # BAK44AV on your 2022 Nissan Frontier Crew Cab with a 6' bed you need the TruXedo Elevate Truck Bed Rack System # TX46NV. This rack works with a variety of BAK tonneau covers including the MX4. The ladder rack features an aluminum construction and adjustable height. It also has integrated T-slot channels and a 500 lb on road weight capacity. The...
view full answer... - Tri-Fold Aluminum Tonneau Cover Compatible w/ TruXedo Elevate Ladder Rack 2022 Nissan Frontier 6 BedThe Lomax Hard Tonneau Cover # LOM45HR is only going to be compatible with the Adarac Pro series roof racks, which currently they do not make for your 2022 Nissan Frontier. For a similar tonneau I recommend the BAKFlip MX4 Hard Tonneau Cover # BAK44AV. This will fit with the TruXedo Elevate Truck Bed Rack System # TX46NV you found. The BAKFlip is a tri-fold, aluminum cover like the Lomax.
view full answer...
Do you have a question about this Tonneau Cover?
Info for this part was:
Updated by:
Wilson B
Written by:
Matthew S
Edited by:
Daron K
Video by:
Samuel H
Installed by:
Kurt W
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Claire H.
7/14/2026
Thanks for the great feedback! We're glad you're enjoying the tonneau cover and that being able to use almost the entire truck bed when it's open has been such a big plus. It's also nice knowing your gear stays secure when you lock the tailgate. We appreciate you mentioning the clamps too—that kind of feedback is always helpful. Thanks again, and we hope you keep enjoying your new cover!