Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re logging long days on the road, a strong wheel keeps everything rolling smooth. This 15" diameter x 5" wide modular steel wheel is rated for 2,150 lbs, giving you dependable strength for repeated use and long hauls. It’s a straightforward setup that stands up to miles of towing without worry.
Nothing throws off a trip like having to stop and retighten hardware. The beveled stud holes on this wheel seat snugly against the hub, helping eliminate lug nut retightening after installation. Once it’s mounted, it stays put so you can focus on the drive instead of the details.
Road grime, rain, and time can take their toll on bare metal. The black powder coat finish protects against corrosion and keeps the modular cutout design looking sharp. It’s a clean, practical style that fits right in with any trailer setup.
Finding the right replacement shouldn’t mean chasing obscure specs. This wheel uses the widely used 5 on 4-1/2" bolt pattern with a 3.19" pilot diameter and 1/2"-20 wheel bolts, making it easy to match up with common hubs for quick, confident installation.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the Lionshead 15-inch-by-five-inch, black modular steel trailer wheel with the five on 4 1/2-inch bolt pattern. Now this steel wheel has the modular design, which is sturdy and corrosion-resistant. And when we say modular design, that's the one that has the round holes all the way around the wheel. The rust-resistant finish includes a black powder coat on both the front and the back of the wheel.
And if you notice, the center cap of the wheel is not included. If you do want one, we do sell those separately. You do wanna make sure to get one that'll have the same diameter as this pilot hole 'cause the cap when you install it goes through that hole. The diameter on this pilot hole is 3.19 inches. Now also, if you notice right over here, the valve stem is pre-installed, is included, and this wheel does meet the DOT, Department of Transportation, and the SAE J1204 specifications.
The wheel is made in the USA. A few dimensions on this we're gonna measure is the diameter and the width, and the diameter will always be measured inside to inside or bead seat to bead seat. So you can see if we go with a tape measure straight across, there's your 15-inch diameter. The width, the same way, you're measuring bead seat to bead seat or inside to inside. There's your five-inch width.
And the bolt pattern on this wheel is a five on 4 1/2-inch bolt pattern, and on a bolt pattern, that's an odd number of lugs, like in this case, five lugs. The way you'll measure the bolt pattern is you'll pick any lug hole. So let's say this hole right here, and then you're gonna measure across to either one of these holes. But when you measure, it's from the center of the starting hole to the furthest edge of whichever hole you measure to. So on this one, it'll measure 4 1/2 inches.
So that's telling you this is a five-lug, 4 1/2-inch bolt pattern. The wheel lug size that chews on this is a half inch by 20, and the weight capacity is 2,200 pounds. Now we do also offer many other items for your trailer. What you can do is click on the TRAILER tab at the top of our website page to go there. And also, if you have any other additional questions regarding this part or any other item we carry, please feel free to reach out to us so that we can help get your questions answered. That's gonna do it for a review on the Lionshead 15-inch-by-five-inch, black modular steel trailer wheel with the five on 4 1/2-inch bolt pattern.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Mike
4/28/2021
Excellent no problems
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
12/30/2025
Glad we could help, Greg! Let us know if there is anything else we can help with! Out of curiosity, what kind of animals do you raise? I like animals. They are delicious! : P