Tru-Flate Wall-Mounted Tire Inflator - 110 psi - 120 Volts

Part Number: 16-250

31 Reviews | 12 Questions

In Stock

$85.79

Retail:$109.02

You Save: 21%

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Tru-Flate Manual Shut Off Tire Inflator - 16-250

Tru-Flate Digital Pressure Gauge Tire Inflator - 16-250

Tru-Flate Wall-Mounted Tire Inflator - 110 psi - 120 Volts 120V 16-250

Tire Inflator 16-250 - Manual Shut Off - Tru-Flate

Tru-Flate 110 psi Tire Inflator - 16-250

Tire Inflator 16-250 - Wall-Mount - Tru-Flate

Tru-Flate Wall-Mount Tire Inflator - 16-250

16-250 - Digital Pressure Gauge Tru-Flate Tire Inflator

Tire Inflator 16-250 - Digital Pressure Gauge - Tru-Flate

Tru-Flate Wall-Mounted Tire Inflator - 110 psi - 120 Volts Digital Pressure Gauge 16-250

Show All (22) Product Images

Show Fewer Product Images

In Use/Installed

16-250 - 110 psi Tru-Flate Tire Inflator

Show All (4) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

Tru-Flate Wall-Mounted Tire Inflator - 110 psi - 120 Volts customer photo

Show All (3) Customer Images

Show Fewer Customer Images

Videos

What to Know About the Tru-Flate Wall-Mounted Tire Inflator

Tru-Flate Wall-Mounted Tire Inflator Spec Review

Show All (2) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Tire inflator can fill a standard automotive tire in about 4 minutes. Smart Flate technology lets you choose a pressure to which your tire will be automatically filled. Unit mounts on your wall with included hardware. Great Prices for the best tire inflator from Tru-Flate. Tru-Flate Wall-Mounted Tire Inflator - 110 psi - 120 Volts part number 16-250 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (31)
Q & A (0)
Related Parts
Photos

Tru-Flate Tire Inflator - 16-250

Features:

Digital tire inflator fills standard tires in approximately 4 minutes
Smart Flate technology automatically fills to a preset pressure and then shuts off
Digital display lets you set a desired pressure
- Pressure display can be switched between PSI, BAR, and KPA
- Saves preset pressure in device memory for ease of use
Wall-mounted unit stays out of the way, but ready to go
Self-resetting switch shuts device down if the motor overheats
Adapters let you fill up inflatable balls, toys, and mattresses
Mounting hardware, locking chock, power cord, inflation hose, and adapters included

Specs:

Output pressure: 110 psi
Voltage: 120 volts
Hose length: 25'
Power cord length: 5'
1-Year limited warranty

This digital tire inflator uses Smart Flate technology to automatically inflate your tire, or other inflatable item, to a preset pressure. The LCD display allows you to choose a desired pressure. Once a pressure is set, the tire inflator will inflate your tire to that pressure and then shut off automatically.

The inflator comes with the hardware necessary to mount it on your wall so it is always ready to go, but also out of the way.

16-250 Truflate Wall-Mounted Tire Inflator - 110 psi - 120 Volts

Customer Satisfaction Score:

96% were satisfied with this product

4% of customers were not satisfied

Product did not meet expectations

4% of customers were not satisfied

Product did not meet expectations

4.3

31 reviews

5 Stars		(20)
4 Stars		(4)
3 Stars		(5)
2 Stars		(0)
1 Star		(2)

by: Brian 12/13/2018 One Year Later

Wish I'd have bought this a long time ago. The inflator is mounted on the wall in my garage along with a 100ft air hose on a reel so it can reach anywhere in my driveway. It works great every time! I did change out the air chuck that came with it for a better locking one. It's great not having to fill my portable air tank anymore. Also, no more trips to a gas station just for air pressure. My Dad really liked this so I got one for him for his Birthday. It does his truck, 5th wheel, car hauler & cars just as well as it takes care of mine.

Click to Enlarge

by: Ernest 10/28/2025

Easy mounting and easy to use. Great product!

by: William 11/07/2017

The air compressor does its job but I found the valve attachment very difficult to attach successfully. Most of the time, I have to hold the valve down to avoid air leaks. I also thought the directions were a bit too brief and did not explain that after you set the pressure, the gauge returns to zero - I thought it would stay at the pressure I set. While minor, these caused me to consider returning the product but I got used to it and now have it mounted on the garage wall. It does do a good job if you are willing to hold the valve down.

William One Year Later

11/7/2018

Kinda grows on you - now that I am used to it, I rely on it with little difficulty with the valve. I am satisfied that it is a good value and time saver. I recommend it.

by: Laura 01/10/2018

Everything arrived as described. We are having some difficulty getting the chuck to seal on the valve stem (standard car tire). Right now, more air leaks out than goes in unless you hold it tightly the whole time (3 minutes). We are emailing the manufacturer to see if they have a better sealing chuck or if we can purchase one. It looks like it would be easy to swap out if the threads are standard. Other than this problem, the unit appears to work well.

Laura One Year Later

1/10/2019

After we ordered another chuck, it works great.

by: Arthur 10/31/2025

WOULD NOT WORK

Kate F.

11/5/2025

This is surprising to me Arthur. Can you please elaborate on how it does not work? Just trying to figure out if maybe it is a faulty unit. Can you please walk me through how you hooked it up and tried to use it? I appreciate you time, and want to make it right.

Arthur

11/5/2025

@KateF I sent it back to you for refund. The tire was at 34 lbs I set the machine to 40 lbs set it to run when in seconds the inflater set off. did three times same results.

Kate F.

11/6/2025

@Arthur I am very sorry to hear that, I am going to be forwarding this information to the manufacturer. Sometimes a faulty unit is made, it is why companies have warranties. Sorry it didn't work better for you Arthur. I do appreciate you taking the time to respond back to me.

by: Neal 12/15/2021 One Year Later

etrailer had delays in shipping this product. They were excellent in communicating about it and offered alternate solutions. I was quite impressed! The actual wall mounted inflator has been excellent. The hose is long enough to fill all four tires and is fast. I think that it is a great product for tire filling.

by: Tobey 12/22/2020

It works as advertised. Here's a few things to know:
1. It's not particularly fast, especially at higher pressures. It took 4.5 minutes to air a trailer tire up from 42 to 65 psi. That's not a complaint, just something to consider if you are buying it.

2. Mount it at least up at eye level. The LED display can't be read if you are looking down at it.

3. You have to cycle the on/off switch between tires. Once it hits the set pressure, it's done.

4. I've found it to be pretty accurate. It's within 1 psi of my hand gauge. I also added a 50' hose to it, which might affect the pressure reading a bit.

I'm happy with it. Only been using it a week, so I can't comment on longevity.

by: Derek 08/21/2020

Extremely quick delivery and easy to install
Bought it to inflate kids toys and balls. Works great.

Click to Enlarge

by: Anthony 05/28/2020

Easy to mount on the wall and works great.

Click to Enlarge

by: Michael G 05/01/2018

Very nice Tire Inflator , put it on the wall it's out of the way. I used it for wheelchair tires the most, inflates tires quickly, very easy to use and not to loud. Hose nozzle is a little hard to get on tire valve but works great when hookup right.

by: Bryan 08/08/2018

Found the product I needed. The Tru-flate Wall Mounted Tire pump. Easy ordering. Delivered as requested. And finally, I received the product in excellent condition, it works perfectly and I’m glad I ordered it. Thank You.

by: Gary 05/22/2020

I am very happy with this product! It seems to work well. I use it to top off the air pressure in my passenger car tires. It is so much easier than using my larger shop compressor for airing up the tires!

by: Pablo 08/22/2021

Works as advertised. Like the compact size and long air hose.

Pablo One Year Later

8/23/2022

Still working great after a year

by: Aaron 10/26/2020

A bit disappointed in the accuracy of the pressure setting. For example, if set to 32 psi it will actually inflate to about 29 psi. So I find I have to offset the pressure setting a few psi above what I actually want it to be. Not the end of the world but its annoying and it's contrary to a question in the Q&A section about this inflator. According to Jameson C. With etrailer, this inflator goes exactly to the set point. This is either not true or I received a defective unit.

by: nick 04/12/2019 One Year Later

Works great, much easier than pulling out air compressor.

by: Christian 09/13/2022 One Year Later

Great little compact tire inflator! Inexpensive too! It's great for maintaining our fleet of golf carts in our campus.

by: Chris 09/21/2022

Perfect for bike and car tires. Wall mounted it in the garage. I shopped around and found the value and quality of this pump is very well priced. Highly recommend!

by: John R 01/08/2021 One Year Later

This is a great inflator. After trying it out, I ordered a second one for the storage unit where I keep my trailer. The hose's reach is long and the inflator is easy to use.

by: Barry 10/31/2023 One Year Later

Works okay, the pressure gage is not accurate. The accuracy also changes from warm weather to cold. It pumps air, that's the main thing. Use your own pressure gage.

by: George 02/28/2026

Unboxed, mounted, and it doesn’t work. Just gives me an oL error.

Lazer S.

3/3/2026

Sorry to hear that, George. Potentially dumb question, have you tried unplugging it for at least 60 seconds and then plugging it back in to see if the code clears? And is there any way you could send me a picture of the code? Email address is [email protected]. I will get in contact with the manufacturer to see what can be done.

by: Mark 04/29/2024

No drywall anchors. The pressure reading is three PSI off after it stops at the predetermined setting. Plastic hose popped off first time I used it.

by: Renee 01/04/2021

Christmas Present for hubby. I wanted a inflator that was permanently fixed to the wall. This Tru-Flate Wall-Mounted Tire Inflator works as expected and is a wonderful addition to the garage. The customer service at etrailer.com made this an easy purchase. They answered all my questions and were timely with responses. Their communication through the purchase process until arrival of the product was excellent!

by: Gary 05/22/2020

I am very happy with this product!

seems to work well for me. I use it to top off the air in my care tires. I would recommend this product

by: Maria 10/30/2017

The best addition to my home. Super easy, super fast, works great

by: Steven 10/19/2026 One Year Later

true

Show More Reviews

See what our Experts say about this Tru-Flate Tire Inflator

Do you have a question about this Tire Inflator?

Is There a Video that Shows How to Operate Tru-Flate Wall-Mounted Tire Inflator # 16-250
Yes, I attached a link to this page that details how to install and use the Tru-Flate Wall-Mounted Tire Inflator # 16-250 you referenced. It shows how to properly connect the air chuck to the valve stem as well as set tire pressure etc.
view full answer...
Tru Flate Wall Mounted Tire Inflator Compatibility With Wall Mounted Air Compressor Hose
The Tru-Flate Wall-Mounted Tire Inflator - 110 psi - 120 Volts # 16-250 has a standard tire valve size fitting coming out the bottom where the coil hose attaches. The other end of the hose has a 1/4 inch male NTP fitting and then the valve assembly. If your wall mounted air compressor hose fits either of these fittings, then you can absolutely use it.
view full answer...
What Type of Air Chuck to Use with the Tru-Flate Wall-Mounted Tire Inflator Part # 16-250
The Tru-Flate Wall-Mounted Tire Inflator part # 16-250 must be used with a flow-through air chuck as the shutoff valve is inside the compressor and not in the air chuck.
view full answer...
Will Tru-Flate Wall-Mounted Tire Inflator Work if Plugged into AC Outlet in 2013 Toyota Highlander
Is the outlet at the back of your 2013 Toyota Highlander a 3-hole? Because the Tru-Flate Wall-Mounted Tire Inflator # 16-250 does require a 3-hole outlet rated for 120 volts at 60Hz. Output is 150 watts. If you do the math that means it pulls 1.25 amps. So if the outlet meets those specs it can power the compressor. But keep in mind that the manufacturer states it is for household use only. The compressor I keep in my vehicle is the Goodyear Tire Inflator - Analog # GY94FR and I couldn't...
view full answer...
Amp Draw of Bulldog Winch Compressor BDW41004
Correct, the max amp draw is 16 amps for the Bulldog Winch Portable Air Compressor # BDW41004. There isn't a similar portable compressor with a max 10 amps, but there is a nifty wall mounted compressor that's still more convenient than going to a gas station to fill your tires. This just plugs into a standard wall outlet and is the Tru-Flate Wall-Mounted Tire Inflator - 110 psi - 120 Volts # 16-250.
view full answer...
Could Thru-Flate Tire Inflator part # 16-250 Inflate Tire with Presta Valves
The only way the air pump part # 16-250 can inflate a presta valve is with a presta valve adapter part # SLM23042.
view full answer...
What is the Warranty on the Tru-Flate Wall Mounted Tire Inflator
Yes; the Tru-Flate Wall-Mounted Tire Inflator - 110 psi - 120 Volts # 16-250 has a 1 year warranty. If there are any issues with the unit that occur within the first year from your date of purchase you can deal directly with us on the issue and we will work to get a replacement unit or have the unit repaired. If you haven't checked out our review video on this unit, I've attached it to this answer.
view full answer...
Does Tru-Flate Wall-Mounted Tire Inflator # 16-250 Have Auto Reset Between Tires
With the Tru-Flate Wall-Mounted Tire Inflator # 16-250 you'll want to set the pressure you want and then with each new tire you inflate it will reset and inflate it to correct PSI once connected. It would not require turning off and on with each tire. It's like if you go to a gas station air pump and you select the PSI you want you can go from tire to tire and it fills them till the PSI is reached and then stops.
view full answer...
Fit and Compatibility of the Tru-Flate Wall-Mounted Tire Inflator
TheTru-Flate Wall-Mounted Tire Inflator, # 16-250 is not designed for this purpose, but I think it could be used for this. This provides a steady output pressure up to 110 psi. and it comes with multiple adapters. The length of time the motor runs would be my concern but it does have a resetting switch that shuts device down if the motor overheats.
view full answer...
Can I Use the Tru-Flate Wall Mounted Tire Inflator to Clean
The Tru-Flate Wall-Mounted Tire Inflator # 16-250 provides up to 110-psi of air pressure in a concentrated area and comes with the ability to adjust the air pressure to suit your application. Typically you'll only need about 30 psi to clean things off, but that may vary by how caked on the dirt/grime is. You'll want to be careful that you're not using too much pressure on certain parts, but this tire inflator can easily serve your desired purpose with a bit of care. I've linked a video...
view full answer...
How Accurate is the Tru-Flate Wall-Mounted Tire Inflator # 16-250
If you were to set the Tru-Flate Wall-Mounted Tire Inflator # 16-250 to 32 psi it would inflate the tires to exactly 32 psi. It is very accurate.
view full answer...
Can the Tru-Flate Wall-Mounted Tire Inflator Be Mounted Outside
The Tru-Flate Wall-Mounted Tire Inflator # 16-250 can be mounted to where it is exposed to the elements, and it is compatible with the follow temperatures: - The working temperature is -20°C ~+50°C - The storage temperature is -40°C ~+65°C So this has potential to be mounted outside, you just have to ensure it will remain within those temps wherever you plan on installing it.
view full answer...

Do you have a question about this Tire Inflator?

Info for this part was:

Edited by:

Lindsey S

Expert Research:

Michael H

Expert Research:

Jameson C

Video Edited:

Joshua S

Video by:

Dustin K

Installed by:

Cole B

Installed by:

Brent H

Updated by:

Wilson B

Written by:

Amanda M

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.