Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re carrying serious weight, a sturdy wheel makes all the difference. The Dexstar Steel Mini Mod Trailer Wheel is built from strong steel and rated for 2,150 lbs, so it stays solid under load. It meets Department of Transportation standards for reliability and gives you peace of mind when your trailer is fully packed.
Corrosion can ruin a wheel fast, especially when it’s exposed to moisture or road grime. This wheel’s white powder coat finish is baked over an e-coat primer, sealing out rust and keeping the surface looking clean. The modular design adds strength and a classic look that stays sharp over time.
Getting the right fit shouldn’t be tricky. This 15" diameter by 6" wide rim uses the common 5 on 4-1/2" bolt pattern, with a 3.19" pilot diameter and zero offset for balanced mounting. The wheel bolt size is 1/2"-20, and it uses a valve stem hole that’s 0.45" in diameter, making setup easy with standard hardware.
The Dexstar Mini Mod is designed to hold steady pressure during regular use. It’s rated for up to 80 psi—plenty of margin for heavy loads or long trips—and pairs with valve stem # AM20904 for the best match at that pressure range. That kind of consistency helps keep your tires performing smoothly mile after mile.
This wheel centers on the lug nuts rather than the hub, which makes it lug-centric like most trailer wheels. It’s ready to be balanced at any tire shop with a pin plate adapter so you can expect a steady, even ride when you’re towing on the highway or around town.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Dexstar 15-inch by 6-inch white modular steel trailer wheel with the five on 4-1/2-inch bolt pattern. Now this wheel's a sturdy steel construction. We mentioned it's a modular design. When we say modular design, that's the one that has those round holes all the way around the wheel. This wheel will give you excellent corrosion resistance 'cause they use a two-step finishing process, which first includes an E-coat primer on the wheel, and then they put a white powder coat finish over the wheel.
It is a high-quality wheel, does meet the DOT, Department of Transportation, specifications. If you notice, it does not come with the center cap. If you do want a center cap, we do sell those supplemental website. You wanna make sure to get one that'll have the same diameter as this pilot hole. 'cause when you install the cap, it will go through this hole.
Diameter on this pilot hole is 3.19-inches. This wheel is made by Dexstar, which is made in the USA. A few measurements I'm gonna give you is the diameter and the width of the wheel. And when we measure the diameter, what you're gonna be measuring is inside to inside because what you're measuring is when a tire's mounted on this wheel, the tire beads are gonna seat right here. So you're measuring from one bead seat to the other to get you the correct diameter.
So you'll be able to see inside to inside. There's your 15-inch measurement. The width will be the same way. You're measuring inside to inside or bead seat to bead seat. There's your 6-inch width.
Now the bolt pattern on this wheel is a five on 4-1/2-inch bolt pattern. And if you wanna measure that on a wheel like this, that's an odd number of lugs. What you'll need to do is pick one of the lug holes, let's say this one, and then you're gonna measure across to either one of these holes. But when you measure, it's from the center of the starting hole to the furthest edge of the hole that you measure to. So if we measured this one, it'd be 4-1/2-inches. So that'd tell you it's a five lug, 4-1/2-inch bolt pattern. Does use a wheel lug size of a 1/2-inch by 20, and the weight capacity on this wheel is 2,200 pounds. But that should do it for a look at the Dexstar 15-inch by 6-inch white modular steel trailer wheel with the five on 4-1/2-inch pull bolt pattern.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Mark S.
9/16/2020
Better than imagined. Still very firm!
Mark S.
9/16/2020
Still looking good! Must keep chips touched up, or rust will form quickly! Great Product!
Tom B.
1/21/2018
Rims are working fine, no problems to date after a year.
Bill
8/27/2020
They are holding up to use well. Good product at a good price
Steve
10/26/2022
Great!! Prices are unbeatable!!
William
7/9/2024
The wheels are operating as expected, and still appear to be be of good quality material!
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tom D.
2/9/2024
Awesome