Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When one axle hits a bump, the other shouldn’t take all the punishment. This 18-3/8" long equalizer connects 2-1/2" wide slipper springs so the impact is shared between axles. It transfers load and shock from one axle to the next, keeping weight balanced and ride quality steady across rough pavement or uneven ground.
For trailers that see real mileage, this equalizer is made to handle the stress. It’s designed for use on 10,000-lb general-duty Dexter axles with leaf springs that have 3/4" rubber-bushed eyes. That means strong support and consistent performance under heavy loads without the harsh ride of worn factory parts.
Getting equalizers and springs to line up cleanly makes all the difference. This right-hand configuration fits 2-1/2" wide slipper leaf springs and uses a 1" center bolt hole with a 3/4" side bolt hole for the spring eye. The geometry is dialed in for stable movement and correct suspension travel.
Whether you’re running a dual- or triple-axle setup, this equalizer keeps things level and predictable. It allows for 42-1/4" axle spacing and hangs from a center hanger (sold separately), making it straightforward to install and dependable once in place. The result is smoother tracking and better load distribution mile after mile.
| Part Number | A | B | C |
|---|---|---|---|
| 10GDH-EQ42RH34 | 18-3/8" | 1" | 3/4" |
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at an equalizer for a two and a half inch wide slipper springs. When it comes to the configuration, this is designed for the right-hand side of the trailer. Now this equalizer connects slipper springs on dual or triple axle trailers. You attach one spring with a bolt through the eye on this end of the equalizer, and then slip the arched end of the other spring into the equalizer on this end. And then the equalizer is designed to suspend from a center hanger that would be mounted onto the frame. Center hangers are sold separately.
If you need some or need one, you can check on options at etrailer.com. This equalizer is designed to transfer load and sudden impacts from one axle to another, helps to distribute weight evenly, and results in a smoother ride for the trailer.This is designed for use on trailers with 10,000 pound general duty Dexter axles and leaf springs with three quarter inch rubber bushed eyes. It allows for 42 and one quarter inch axle spacing. Again, it does fit two and a half inch wide slipper leaf springs. The center bolt hold diameter is one inch, the side bold hold diameter for mounting the spring is three quarters of an inch in diameter.
Overall, edge to edge this direction, we're looking at about 18 and a half inches. Width measurement measures about three and one eighth inches. And then the height measurement is about five and one quarter. And that's going to do it for today's look at the equalizer for two and a half inch wide slipper springs.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
1/14/2022
You probably received the left hand side on accident Item # 13-82-1. Customer service will reach out to you.
Helpful Links
Trailer-Leaf-Spring-SuspensionRedline13-82-1.html