Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When your trailer hits rough roads, a good equalizer keeps things level and steady. This Dexter equalizer connects the slipper springs on your tandem or triple-axle setup, transferring load and impact evenly between the axles. The 24-3/4" length and 1-1/8" center hole allow the suspension to move as it should, so the ride stays smooth and controlled mile after mile.
Suspension parts take a beating under load, and this equalizer is built to take it. The solid steel construction gives it the durability to handle bumps, potholes, and long hauls without flexing or wearing out prematurely. It’s made to fit 3" wide slipper springs with 1" diameter eyes, giving you a sturdy, reliable connection point in the suspension system.
Nobody likes the clatter of metal-on-metal suspension parts. The rubber bushings pressed into the 1-1/8" center hole help cut down noise and vibration, so your trailer runs quieter and smoother. The result is a more comfortable towing experience with less harsh feedback through the frame.
This equalizer installs cleanly into the middle hanger using standard bolts (sold separately). The front spring’s arched end rests on a keeper bolt, while the rear spring attaches through the eye with a shackle bolt. It’s a straightforward design that fits left or right hand positions and keeps the suspension geometry correct so everything moves together as it should.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at an equalizer for a three inch wide slipper springs. Now this unit adds a new or replaces an old equalizer on your trailer. It's made from a durable steel construction with a black paint finish. It's simply connects the slipper springs on dual or triple axle trailers. You would attach one spring with a bolt through the eye that would be located on this end here. And then slip the arched end of the other spring onto the equalizer at this point here.
And then the equalizer itself is suspended from a center hanger on the trailer frame. Center hanger not included. That is sold separately. If you need one for your trailer, you can find those right here at etrailer.com. Now, once installed, this unit is designed to transfer load and sudden impacts from one axle to another and it helps distribute weight evenly and results in a smoother ride for your trailer.
Again, it is designed for a three inch wide slipper leaf springs.The overall length of the unit, measuring from edge to edge, measured 24 and 3/4 inches. The center bolt hole diameter is one and 1/8 inches. And the side bolt hole diameter for mounting the spring is one inch in diameter.That's going to do it for today's look at the equalizer for three inch wide slipper springs.
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
Ratings & Reviews
Jorge
4/13/2023
Its been over a year since we installed the new leaf spring equalizers on our trailer and still working like the first day.
D.a.
9/13/2018
Still solid as a rock after a year. No problems.
Curt R.
12/6/2023
Our trailers are always on the move. the parts from Etrailer hold up as well or better than the OE parts.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gordon
3/11/2024
They are a excellent Heavy Duty perfect fit.