See what our Experts say about this Optronics Trailer Lights

• Replacement Tail Light Lens for 2018 Grand Design Imagine 2500RL
  The Replacement Lens # AST61B referenced in your question is designed for the Optronics # RVSTL61 and # RVST61 Trailer Tail Lights. The lens itself measures 8-5/8 inches long and 3-3/16 inches tall Unfortunately trailer manufacturers do not keep a good record of smaller parts like these that they install at the factory so I am unable to verify if this is the exact replacement lens for the lights on your 2018 Grand Design Imagine. With that being said I took a look at some pictures of...
  view full answer...
• Replacement Taillights for 2015 Coleman Clipper
  I wasn't able to get a totally perfect shot of your 2015 Coleman Clipper online but it does look like the # RVST61 is the correct drivers side assembly or for the passenger side # RVST60. We have replacement lenses for these too as part # AST60B but the clips of the base of the light are not replaceable as they are part of the base.
  view full answer...
• Replacement Tail Light Lens for SAE 2AS2T216
  The correct replacement lens for the RV Driver Side Tail Light part # RVST61 on your Forest Rive trailer is the Replacement Lens part # AST61B. This light has the clear portion at the bottom to allow the licence plate bulb to show though.
  view full answer...
  
• Replacement Trailer Taillight Lens for Part Number AS2T216
  For your Optronics light part as2t216 we have found that the correct replacement lens is the part # AST60B.
  view full answer...
• Replacement Tail Light Assembly for 2013 WildcatMaxx TT
  Thank you for the photo and information! It looks like you have the Low Profile LED tail light from Optronics as well as their standard boxed combination trailer tail light. We have both the driver and passenger side lights and the only difference is the driver side lights have a clear lens and extra light underneath (and a bracket for the low profile) to illuminate a license plate. Low Profile Driver Side - # RVSTL61 Passenger Side - # RVSTLB60 Combination Driver Side - # STL15RB Passenger...
  view full answer...
  
• Replacement Driver Taillight for a Forest River Flagstaff MAC Pop Up
  It sounds like you are looking for the RV Tail Light part # RVST61 which has the integrated license plate mounting bracket you are looking for. Please note, the bracket is part of the light so they must be replaced together.
  view full answer...
  
• Replacement Taillight for Rockwood Freedom 2318G Trailer
  Thanks for the photo, and based on that it looks like you have the Optronics RV Tail Light - Driver's Side # RVST61 and Passenger's Side # RVST60. To ensure you want to measure, as these both measure 8-5/8" long x 3-3/16" tall x 2-1/4" deep. If that is the right one, the correct replacement lenses are - Driver's Side: Replacement Lens # AST61B - Passenger's Side: Replacement Lens # AST60B If you have a different measurement let me know but I'm confident this is what you have.
  view full answer...
  
• How to Determine Correct Replacement Taillight Lens for 2007 Forest River Flagstaff Super Lite TT
  It's not possible to look up which particular taillight lens your Forest River Flagstaff Super Lite uses, as there isn't a database of that information, but we very well might have a solution for you. From what I found online, the Optronics # AST61B was mentioned several times as being the proper replacement lens that's compatible with either the driver or passenger side taillight. You can confirm this by checking the housing of your lamp with the cracked/broken lens. If the lamps you...
  view full answer...
  
• LED Light Upgrades For a 2018 Forest River Flagstaff Micro Lite 21DS
  Based on images I could find for your 2018 Forest River Flagstaff Micro Lite DS21 I see it has the Tail Light # RVST60 and # RVST61 but with a black base. We do have the LED Tail Lights # RVSTLB60 and # RVSTLB61 which are a similar shape with LED lights and the black base. I'm a little confused when you say the colors don't line up and reflectors are on the wrong side. With these lights they have reflectors built into the lens. The Light # RVSTLB61 does mention drivers side but you are...
  view full answer...
• Replacement Taillights for 2006 jayco Jay Series 806 Pop Up Camper
  From online photos I've seen, the # RVST60 passenger side taillamp looks like the correct replacement, although I can't definitively confirm that because there isn't a good resource that tells us what particular lamp is used on which camper. The lamp measures 8-5/8 x 3-3/16, so it that's a match for yours, this would be a compatible lamp. For the driver's side, part # RVST61 is used.
  view full answer...
• Replacement Tail Lights for a 1981 Palomino Pop Up Camper
  The first thing to look at is the size of the Bargman tail light # 30-92-002 and how it compares to the existing lights on your 1981 Palomino pup. The Bargman light is 8-9/16" long x 4-9/16" wide x 2-1/8" thick. The wiring on this light may seem a little confusing but I can explain it. The two white wires are ground wires and will need to attach to a clean, bare metal surface. The black wire is for brake lights and turn signals. Green is for running lights. That leaves the red wire for...
  view full answer...
• Replacement Tail Light Lens For Left Side Of A 2018 Grand Design Momentum
  I may have an option but unfortunately since trailer manufacturers don't always keep the best logs of what small parts are installed on a specific trailer, we do not have any way to confirm the correct replacement lens for your 2018 Grand Design Momentum. The Replacement Tail Light Lens # AST61B you were looking at is designed to fit on the # RVSTL61 and # RVST61 tail lights and measures 8 5/8" long and 3 3/16" tall. To confirm the fit you will need to measure your current tail lights,...
  view full answer...
• Dim Trailer Taillight Possibly Caused by Poor Ground Connection
  It certainly sounds as if you're getting an insufficient ground connection. I would definitely take a dime sized area around the hole for the ground screw down to bare metal, then install a star washer between the frame and the ring terminal on the ground wire. When the screw it tightened down, the star washer will bite into the trailer frame, ensuring a bullet proof ground connection. Once connected, give the area a quick shot of rust inhibiting spray paint to protect it. I've linked...
  view full answer...
• LED and Incandescent Trailer Tail Lights with License Plate Bracket
  For an LED trailer tail light with license plate bracket we have # RVSTL61 and # RVSTLB61. For incandescent we have the following: # 30-92-003 # RVST56 # 30-92-108 # 30-92-004 # 30-92-109 # RVST61 # RVSTB61
  view full answer...
• What is Difference Between Optronics Trailer Lights # RVST60 and # RVST61
  The part # RVST61 is the driver side light that has the license plate bracket and light built into it. The part # RVST60 would be the passenger side light does not have either of those things.
  view full answer...
• Will Replacement Lens # AST61B Fit a Rockwood Mini Lite RTL2109S Trailer
  Replacement Lens # AST61B does appear to be the correct replacement for the lights on your Rockwood Mini Lite RTL2109S. To be certain we will need to look at the lights this lens goes with, such as # RVST61, and compare the design and measurements to what is on your trailer. The light itself is 8-5/8 inches wide, 3-3/16 inches deep, and 2-1/4 inches deep. The center part of it sticks out further than either side. If all of this matches what is currently on the trailer then lens # AST61B...
  view full answer...
• Replacement Lens for RVST60 and RVST61 Optronics Lights
  For a replacement lens for the # RVST60 you would need the part # AST60B. For the part # RVST61 you would need the part # AST61B.
  view full answer...
• Availability of Version of Optronics RV Tail Light RVST61 with Black Base
  We do offer a version of the Optronics RV Tail Light # RVST61 that has a black base. That item is part # RVSTLB61 which is a high-efficiency LED version of this same light style. LEDs use about 1/10th the power of incandescent bulb lights. This means an LED version of any given light will reduce your power consumption and waste heat and also be brighter. You can also save your trailer's on-board battery power by replacing interior light bulbs with LED equivalents. You can see such items...
  view full answer...
• Where To Attach Ground Connection of Trailer Taillight Assembly
  Because the main ground wire from the trailer connector grounds to the trailer tongue, you can simply ground the # RVST61 trailer taillight to the trailer frame using a ring terminal like # DW05721-1. This utilizes your trailer frame as part of the grounding system, which is typical for trailer and automotive applications.
  view full answer...
• Is There a RV Tail Light with License Plate Bracket For Passenger Side In White
  The RV Tail Light with License Plate Bracket is offered in both black as part # RVSTB61 and white as part # RVST61. These are for the driver side which is where the license plate should be attached but it could be used on the other side if needed. The matching tail light would then be the RV Tail Light part # RVSTB60 for black or part # RVST60 for white.
  view full answer...