Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This is a rectangular, surface mount porch and utility light with switch. This clear light measures 6" long x 3-1/2" wide x 2" deep.
Features:
Specs:
The slightly angled, white, molded plastic housing and durable lens provide all-weather protection against corrosion. This light has been tested and approved by both UL (Underwriters Laboratories) and the CSA (Canadian Standards Assoc.). The light features traditional styling with a replaceable, snap-on lens and easy-to-replace bulb. The light also features a toggle-button on/off switch. This light surface mounts by mounting holes in the base. The two-wire design includes the lead wire for power and a ground wire for mounting to any surface.
Manufacturer Cross Reference
Light will work as an exact replacement for:
Bargman # 34-78-503
Uni Bond # DL3050S
Wesbar # 3652
Grote # 61651
Peterson # 2557C
Surface mount rectangular porch utility lights with separate ground wire. Traditional design. White housing. Features snap-on, replaceable lens, on / off switch and easy to change replaceable bulb. All-weather, molded plastic housing and durable lens protect against corrosion. CSA approved.
Ratings & Reviews
Light came without screws or gasket. Mounted above trailer propane tanks, light illuminates the back of my pick-up as well as trailer hitch and utilities. Very happy with the results.
I used these to replace the 5 existing lights on the outside of my horse trailer. These seemed to be a direct replacement for the 10 year old lights that came with the trailer. The screw holes all lined up and replacement was a pretty quick job. I only wish the back of the light was solid or sealed to make it a little more weatherproof.
As always etrailer shipped rapidly and the item was well packaged. The light itself got downgraded a star solely because the metal backing plate is not securely fastened to the plastic body which required a little juggling while on my ladder to keep everything assembled while I mounted it. It works as advertised once wired up and mounted. Hey it is less than ten bucks so certainly not a disqualifier!
Exactly as ordered and quick shipping.
We "inherited" a 1982 Jayco JayCardinal popup trailer, a hand-me-down from my secretary & her husband. It's in great shape, but I've been fixing little things that had fallen into disrepair; they haven't used the popup for 6-8 years. Noticed that the porch light was broken & etrailer.com had the best price online for a replacement. It arrived 3 days early in perfect condition. Haven't wired it in yet, but I compared it with the original still on the popup & it's the same. Will get it in right away as we are anxious to take our "new" popup camping this summer! Thanks etrailer!
I ordered the wrong replacements (right color but no on/off switch) .They are courtesy lights for the outside of my horse trailer and need to be "off" when I am hauling at night.
Called the 800# and and spoke to Bryan who care of sending me the correct lights and advised me on how to return the incorrect lights. (I thought I needed a packing slip to return, but one was not included in the package). Did not need a packing slip, so I mailed back the wrong lights the next day.
My correct replacements arrived yesterday and they are perfect.
etrailer.com is wonderful. The website is user friendly, and the videos on many of the products clarify questions like how to install as well as what the item looks like (from all sides). The staff is friendly, too.
Arrived fast great seller!!
I would purchase again
Part was delivered fast and installed easily. Thanks
Great service on delivery. Thank you. Screws fit old broken light perfectly. Wire grommet hole is 3 cm off center (old light had center hole), so had to relocate to match hole in sidewall. If you only have a hot coming thru sidewall, then you have to figure a way to connect ground to chassis. Other than that, good.
Ernest
9/4/2024
Outside dimensions were the same as old one, but inside was different. It has been a year, but as I remember, I had to drill some holes and rewire in order to match the wires coming out of the camper. Overall, happy with it.
Nice outside light, especially if you replace the bulb with and LED bulb. There wasn't enough "room" behind the metal back plate for wiring, so I drilled a hole in it and connected the RV & light wires inside. Works fine.
Mike
9/8/2017
Being an outside light it doesnt get a lot of use, but it still works just fine.
This was perfect. Easy to install plenty of wire to make conections. I did add an LED blulb. I recomend this product. d
Just what I needed, and delivered promptly! Thanks Much!!!
Works just fine. Received it quickly.
This was a perfect replacement for the front light on my hard-sided pop up. Ordering was quick and easy, and the product installed quickly and worked like a charm. Delivered on schedule in perfect shape.
Very nice lights, great quality, great price, excellent service, as usual! Will work great on our '96 Coachmen project camper for porch & front service light.
Arrived on day promised and undamaged. Thank You!
Like all orders I’ve placed products are as described at a fair price.
This was just what I needed. Identical to the broken one on my camper except that the light socket was on the right side instead of the left. I just had to reroute the wires through a new wire path which was accomplished with a 3/8" drill bit and a utility knife. Other than that, it mounted right up to the holes that were already there. Just what I was looking for. Great product.
Thanks for having it in stock.
I can;y give 5 stars because I haven't installed them, but I think the LED lights are a nice upgrade for the horse compartment in the trailer.
It is an exact replacement. Thanks.
Fit was good matched existing holes, paid for next shipping and got it next good job
This is a flimsy piece of kit. The backing plate is extremely thin and easily bent and the front (light) part is equally cheap. The lens popped off on mine. I would spend more and buy a better light. I wish it didn't have a switch also. It is on a switched circuit.
I purchased these lights to keep the original look on my 2011 Casita travel trailer. I did have to relocate the wiring connector using a 5/16 drill bit as shown in the picture to match my camper outlet as well as flipping the switch to match the original switch operation. I did have to recrimp the ground (white) connector to get a solid connection. Make sure to silicone all body contact holes. also on this camper,do not use 3/16 rivets shorter than 3/4" long. Looks original and works great.
Do you have a question about this RV Exterior Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Wayne A.
3/28/2018
Working great after 1 year.