These mini LEDs throw out a clean, bright amber light while drawing only 0.022 amps at 12.8V. That means more light with less power used. Each light uses a single diode that lasts up to 50 times longer than incandescent bulbs, so you won’t have to worry about swapping burnt-out filaments again. It’s an easy way to boost visibility and efficiency in one simple upgrade.
Moisture is no problem here. Each 3/4" light has a sonically sealed housing and lens that form a single waterproof unit, keeping water out even when submerged. Whether it’s rain, spray, or launching at the ramp, the LEDs and circuit boards stay protected so you can count on them to perform every time.
Tight mounting space doesn’t have to be an issue. Each light fits neatly into a 3/4" diameter hole and installs flush using the included black grommets. The compact 7/8" depth keeps the setup clean and out of harm’s way while still delivering full brightness. The included 2-wire molded harness makes power and ground connections simple and secure.
With a PC rating, these lights shine 90 degrees to either side of center for a total of 180 degrees of coverage. That wide spread makes them easy to see from multiple angles, improving visibility for other drivers when you’re on the road. When properly mounted, they can serve as both clearance and identification lights on setups over 80" wide.
Each lens and housing is made from tough polycarbonate that resists impact and wear over time. The LEDs are backed by a lifetime warranty, giving extra peace of mind that once installed, these lights will keep shining bright for the long haul.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this mini LED trailer identification light kit. Now this kit is gonna function as a front identification light for your trailers that are over 80 inches wide. These lights are PC rated, so they are gonna produce a 180-degree beam, so they can be seen from the front and from both sides. So they are gonna be DOT-compliant. Gonna be a great option for those of you who are wanting to add or replace some trailer identification lights on your trailer.
Now, these do have a recessed mount design. So they include the black grommet there to kind of cover up as they are sticking back through. So you are going to need a 3/4 inch diameter hole for each light because the lights are 3/4 inches in diameter by 7/8 of an inch deep. Your grommet diameter here is 11/16 of an inch. Each light is gonna have a durable polycarbonate housing and a clear polycarbonate lens over one amber LED.
That housing and lens unit are sonically sealed, so it is gonna be waterproof for you. So this is gonna be great for your trailers that do need to be submerged, like a boat trailer and that sort of thing. If you're not familiar with the benefits of LEDs, they are gonna be a great replacement over your older incandescent-style bulbs because they last about 50 times longer, because there's no brittle filament inside, like with your incandescent bulb, so it's not as easy to break them. These actually come with a lifetime warranty on the LEDs because they are so durable, but not only are they durable, they're also gonna be a lot more efficient. So they're gonna provide that nice, bright light with less power draw than your incandescent lights.
So these are actually only gonna draw about 0.022 amps on your 12 volt DC systems. So get plenty of light there with very little power draw at all. If I disconnect it from our power source here, we can talk about her overall length is right at 28 inches from where it's gonna be mounted on your trailer back to our two-wire connector here. So we're gonna have our ground and our lead wire to get connected to power. So 28 inches of space to work there to get this mounted in place.
So really a nice option if you are looking to add or replace a front indicator for your trailer. This is gonna do a great job for you. That's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
it was all just as advertised.
Perfect fit good bright light easy to i nstall
Nice and bright super easy to install
Great item that you have in stock packaged well arrived perfect.
These little guys are great! Easy to install, way bright, adds a little custom touch.
Excellent sales and knowledgeable empl oyees.
Everything I needed all in one place! Fast shipping.
The marker lights were a great replacem ent.
High quality and fast shipping. Customer service was a joy to work with.
I ordered several different trailer parts from etrailer and the service is good so I won’t order from anyone else. The product is always right
Item is as advertised—exactly what I ne eded.
Awsum Little lights have been using these lights for years on all my trucks and trailers never replaced any yet,Thanks etrailer
Used them for a different purpose, grille lights for a Ford Maverick! They worked great. Wonderful quality and service. Thanks!
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.