Designed to combat ice and snow buildup, this heated trailer tail light enhances visibility and safety. Serves 3 functions: brake, tail, and turn. Recessed mount with grommet (sold separately). Weathertight connection. 4-5/16" Diameter.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. Let's take a look together at this Optronics LED Trailer Taillight. Now this round trailer taillight is going to give you three functions. I do have this connected to my power source already and you can currently see the taillight function. But I'm gonna go ahead and activate the brake light function and then the turn signal function.
So you have three functions that this light is going to give you. Lemme go ahead and turn my studio lights off here just to give you a better demonstration of what this is going to look like in low light or dark conditions. So again, we have the tail light function and then the stop light function, and then the turn signal function. And one other thing I wanna show you, going for a wide view here, I wanna shine this on the wall behind me. I'm gonna have to activate the brakes there, and then the turn signal.
So you can see it puts out quite a bit of light as I'm shining that on the wall behind me. And my camera's not focusing perfectly since I have the lights off there. But hopefully that will give you an idea of what this looks like from a distance turning my lights back on, break, and then turn signal and then just a normal taillight there that you've already seen. Now these do feature six diodes and as you know, LEDs are long lasting and energy efficient. There is a lifetime warranty on the LEDs.
This is going to plug into your 12 volt system. Lemme go ahead and give you some measurements. Looks like the diameter we're sitting right at about four and five 16 inches with the diameter. And then the thickness, including that plug, where the plug goes into the housing, if you wanna call it that. We're about one and 13, 16 inches deep overall.
And this is a heated lens, so that's going to make sure that you have consistent illumination in cold or damp conditions. It's gonna prevent snow and ice buildup from obscuring the light and extending the lifespan of the light by preventing damage caused by moisture accumulation. This light is sonically sealed. The polycarbonate housing and lens unit is going to be submersible. And this recessed mount with grommet will seamlessly integrate into your trailer. The grommet is sold separately and so this is going to fit into a four and a half inch diameter hole. And the weather type connection point on the back of the light does require an adapter. And on your screen, I'm putting that adapter there. If you don't currently have it with our item number, that adapter is going to allow you to plug this in. It uses the industry standard three-prong plug. So you can take that item number that you see there on your screen for that pigtail, pop it in the search field of our website, and that will take you to that adapter and you can add that to your order, if you are in need of it. This is DOT compliant and I think that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Ratings & Reviews
Perfect fit and plug was perfect as well on my 2009 Ranger Trail trailer!
Now that I'm finishing up on my Teardrop Trailer I've got these lights installed, along with a LED tag holder, and LED marker lights. I had also bought the fenders from etrailer they look great, and I get a lot of comments how good all these parts look. Oh and the prices are better then any place I could find.......Thanks etrailer
Part was exactly what we needed. Shipping was quick - Thanks!
This has been a very good product. The light was easy to order and install. I have not had a problem with it working properly and I expect it to keep working for years to come.
Perfect fit, after contacting etrailer for info on wiring hookup, all went smoothly.Very reasonable price as well. Thanks etrailer for getting my Horse Trailer back to new status.
I want to thank you for all your help with my trailer you were more helpful than you realize. So this is my trailer for a 22' Flats Cat shallow draft Catamaran. I totally dismantled my trailer and buffed by hand with a wire buffer and sand blasted in some spots and applied multiple coats of some very expensive galvanize paint (Z.R.C.). I installed all new C. E. Smith Carpet (about 80'), seven new LED waterproof lights, new springs, new equalizers, new tongue jack, new wench, new safety chain, new chain brackets, all new SS hardware and a 35' long wiring harness.
I was able to send only one review with a picture of the safety chain and brackets. I'm having a little trouble with the rest..oh some of these items were bought locally or from your competitors, until I found ETRAILER. Your prices were cheaper for the exact same things. Your helpful how to videos were helpful. And Rose, your personal helpful knowledge made my buying experience very pleasant, I actually enjoyed talking to you! Thanks to ETRAILER and specifically to Rose G.
The 10-diode tail lights were well made, bright, and easy to install. We also ordered and installed the matching reflector rings, which were also easy to install, look great, and give added safety features.
After one of the the incandescent trilights the factory installed on my trailer burnt out I discovered they where sealed and the bulbs could not be replaced,
So I purchased two of these and discovered they are ery nice lights and unlike incandescent lights they don't screw up the turn signal flash rate.
I am now in the process of rebuilding a trailer mounted generator and just ordered 2 more of them for that trailer and I also bought LED marker lights from the same manufacturer.
If you need new or replacement taillights or marker lights LED's are the way to go, long lasting, nice and bright and in my opinion they way they instantly light up get more attention from drivers behind me possibly reducing the chances of getting my trailer rear ended by a inattentive driver.
Replaced the jet ski trailer light perfectly! Lighting is much brighter than the stock incandescent bulb in all modes and light disbursement is very good, even from the sides.
Works best on my boat trailer!
Solid product, fast shipping.
Perfect replacement for the til lights on my trailer. Thank you etrailer for having what I needed, and the detailed information to know it was the right part to order.
Exact fit and an excellent replacement for the lights on my 2006 Ranger Boat trailer.
Fit perfectly to on my boatmate trailer, no issues
Exact replacement, same size, didn't even have to drill new holes. Had looked at many other sites and couldn't find the right size till I checked Etrailer. Thank you so much
The Optronics LED lights fit perfectly on my 2021 Keystone Outback. Installation was easy. It took longer to remove the old sealant.
Replacing original tailights on 2018 ca mper.
I have a 97 Cargo Mate and I wanted to make the conversion to LED lights. The lights and grommets were a perfect upgraded match. So much brighter and better peace of mind when traveling in inclement weather to be seen from behind. Everything was great quality and shipped fast
The lights were easy to install. They are bright lights, very visible in the sunlight.
We installed these on our older dump trailer, replacing the old lights.
They fit perfect, and look and work great.
Great product. An exact copy of what I had installed on my enclosed trailer. It was an easy install with color matching wires. Great quality, easy install and an excellent price point. Can’t go wrong here folks.
I just installed the new trailer lights on our Sundowner horse trailer. The lights are of good quality and replaced the original lights no fabrication needed. The wiring matched up well with the existing wiring.
Perfect fit. Installation took longer than it should due to very poor previous repair performed at the dealer. Glad I chose, at 73 swf, to do rhe work myself. The first time I have had fully functional tail lights since buying in 2022. Woo hoo.
Perfect fit and exact replacement for my 2008 Ranger Z21 trailer. Great price and fast shipping. Totally satisfied!!!
Light was the same size as previous one on EZ Loader boat trailer. Easy to install and very bright. Original one made it 10 years and had moisture inside causing most of the LEDs to stop working.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.