10-3/4" Wide x 36" long x 20" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. Ribbed, 16-gauge steel is durable. Bolt or weld onto your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff etrailer.com. Today we're going to take a look at the etrailer single axle steel trailer fender with the ribs for 15 inch to 16 inch wheels for a quantity of one fender. Now this is a rounded fender that'll cover one tire on your single axle trailer. This will act as a splash guard, helps keep any road debris from hitting other vehicles, and it also helps protect your trailer's cargo. Just want to show you the outer edge on this.
If you notice, has a nice rounded one inch curve radius lip to it for a nice finished appearance, and on the inner edge, it is a 90 degree lip on the inner edge, which allows you to mount it flushed to your enclosed trailer. You can see it has a sturdy ribbed 16 gauge cold rolled steel construction. Has a nice raw finish. This can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish.Do you notice the four ribs that go across here on the fender They are stiffener ribs. They are designed to help eliminate flexing of the fender.
Now this is a nice weld-on or bolt-on installation. It is not pre-drilled and the mounting brackets for bolt-on installation are sold separately. This part as made in the USA. Specs, again, it's for quantity of one fender. Application is single axle trailers with 15 inch to 16 inch diameter wheels.
Total weight on this fender is right at 11 pounds, and the last thing I want to do is just give you some measurements.First, we'll measure the width from here to here once we get our tape measure on that. All the way across you can see is going to be right at 36 inches long. The height on it from very bottom to very top is right at 19 and three quarter inches tall. If we turn this and if we get the width on it is going to be right at 10 and three quarter inches wide. That should do it for the review on the etrailer single axle steel trailer fender with the ribs for 15 inch to 16 inch wheels for a quantity of one..
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.