Video Transcript for What to Know About the CE Smith Crossmember Pad for Boat Trailers

Hi, everybody. Andy here with etrailer.com. Let's take a real quick look together at the CE Smith Black Crossmember Pad for Boat Trailers. Now, if your boat trailer has crossmembers or support frames that go from side to side, frame rail to frame rail, you can use one or more of these sturdy poly plastic pads to maximize protection of your boat's hull and keel during loading, transport, and unloading. You can even mount them on the frame rails to protect your boat's finish. This poly plastic pad is going to protect the hull or keel of your boat and help absorb road shock if your boat makes contact with it during trailering.

The mounting holes are going to allow for a simple installation onto the cross member. I do wanna point out that hardware is not included with this. You're just gonna receive this pad. Let me find my ruler here and just give you some overall measurements. Let me give you the measurements of the distance between the mounting holes.

So, let me see if I can line this up for you real quick, so you can see. So, lining that up on center, we're sitting right at about 4 3/4" on those mounting holes. And then looking at the overall length, we're sitting right at a little over 10", maybe this one in particular, looks like we're sitting right about 10 1/8", a little over 10". The overall width, we're sitting right at about 1 1/2". Now, this is made here in the U.S.A.

Very sturdy. Again, made from that poly plastic material. And I think that's gonna wrap up our real quick look today. I do hope that our time together was helpful for you. Again, my name is Andy.

Thank you for joining me.