To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you need a solid cover to keep your gear safe from weather and theft, this one delivers. The fiberglass-reinforced plastic panels have a honeycomb-patterned internal structure that makes them strong and durable. With a 200-lb weight capacity when evenly distributed, it can handle everyday loads while still folding easily. The textured matte black finish keeps it looking clean and low-profile at just 1" above the bed rails.
You get the security of a hard cover without losing access to your bed space. The tri-fold design opens from the tailgate using pinch levers on either side, so you can load or unload gear quickly. When folded forward, it gives access to about three-quarters of the bed, and when you need the full space, it can be removed completely in minutes.
Rain, sleet, or snow—your cargo stays protected. The built-in weather seals along the edges block water without needing drain tubes or extra parts. It shuts securely whether the tailgate is open or closed, keeping out water and road grime even through heavy use.
There are no external locks or keys to worry about. The cover’s release levers are located under the panels and can only be accessed when the tailgate is open. Once your tailgate is locked, the cover locks with it—keeping everything underneath out of sight and secure.
No drilling, no special tools—just clamp it to the inside of your bed rails and you’re done. The lightweight composite panels make it easy to position during install, and once tightened down, it sits flush and solid with no gaps or rattles.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
The quality of the cover seems to be there but installation could have been easier. Installed the distance between the rails was a 1/4 inch too narrow and the top would not close. The brackets which were completely different from the ones in the video had to be modified to get my 1/8 inch on each side. Also the were no spacers and brackets to lock down the forward section. Once I modified everything the cover fit and looks great. It would be nice if the installation video included the current brackets which do not work as constructed. I would suggest you try to install the new version of the brackets.
So far the Tonneau Cover seems fine, and a great value for the price. My review is largely for the cover. With appropriate instructions it should take less than an your to install.
Unfortunately the instructions are inaccurate and the video is out of date. The video is fairly close, I would recommend following the video and ignoring the printed instructions. The bed rail clamps have changed since the video was made and a couple of the cover features are a little bit different.
Trying to follow the printed instructions cost me an extra 3 hours. I suspect the instructions were written for a different vehicle and mistakenly reprinted for a 2026 Tundra. The first step is to remove the bed rails and then insert spacers to lower the bed rails. The included tool to remove the rails is the wrong one (allen not Torx). I had to run out and get a tool. Then after removing the bed rails I discovered that this instruction step was incorrect. I had to remove the spacers and reinstall the bedrails. Very frustrating, as you can imagine.
High Quality feel and materials. Fit was perfect for my Tundra. Read the installation instructions thoroughly before installation. Extra parts come in the box to adapt to different type installations. Separate the parts you need and it installs as directed.
Installed on a 2024 F-250. The install was very straight forward and easy to
understand, especially with the install video eTrailer provides. It fits well
and looks good. Took me about 1.5 hours to install.
My new tonneau cover fits great on my 2019 Chev Colorado. It was easy to install, easy to engage with the latching and sturdy when closed. I'm happy with my purchase and recommend it anyone considering this product.
There a rolled rubber seal on the back panel, does it stay inside or do you roll it out?
For the price, this has been a nice cover. I have had it more than a year now so I have a few thoughts. First of all, the installation was simple and straightforward. The cover itself isn’t too heavy and I was able to put it on by myself. The butyl tape came in handy because on my truck, I had a 1” gap on both forward corners and the tape sealed them up tight. At first, I had trouble with a couple of the side latches staying latched. What I discovered was my truck had a bent side rail where something heavy had been dropped on it. Once I figured that out I was able to add a shim between the attached side rail and the truck bed rail that raised it just enough for the latches to stay latched. I also like that I can leave the cover on when I hook the 5th wheel up to it. I’m using a Gen Y Executive hitch and I have plenty of clearance between 5th wheel and cover. The Tri-fold system is nice and it has straps that secure it in the open position when going down the road.
I do have one negative comment. The rear seal between the cover and the top of the tailgate is so tight that the tailgate won’t open on its own, even with the auto open feature of my truck. I don’t see any way to adjust it to take the pressure off so I’ll just have to live with that. All in all it’s a great tonneau cover and it suits me perfectly.
This is exactly what I was looking for. Form, fit and function are excellent and the installation was easier than what I had anticipated. All for a fraction of the cost of getting a similar product installed by the Toyota dealership. My only issue is that currently 2 of the 8 latching mechanisms are not catching the side rail when I close the cover. I suspect this requires an easy adjustment that I haven’t taken the time to figure out yet. The cover sits flush and secure to the truck bed side rails so I’m sure I can figure this out.
This cover has worked flawlessly.
It has kept the bed dry in all but the heaviest wind blown rain. Better than any other cover I have had
I just finished installing the bed cover on a 2026 Tundra. The product itself is hard to complain about; seems to be good quality, time will tell. The instructions and the etrailer video leave a bit to be desired.
Thoroughly appreciate everyone I spoke to at etrailer and the quick shipping and fantastic pricing. That being said, maybe take a few days and give the instruction sheet a good look.
All this being said, the vague assembly instructions sheet was certainly not enough to keep me from buying this again. Looks much better than many more expensive covers.
Simply assembling. Even though there are gaps in the front, it is to be highly recommended.
The cover could use a couple more latches at the folds to help it lay flatter.
The cover was delivered in just a couple of days. The instructions were clear with the exception of what the piece of rubber seal and the roll of seal was to be used for. The cover looks good and works as described. I had my truck in a hard rain and the bed was 99.9% dry. Nice so far. Time will tell though.
It fit perfect! Simple to install, just what I was looking for. I get lots of compliments!
The instructions on for installation could have been a little more clear. I had a couple trial and error experiences, but the cover and hardware are great. Can't beat it for the price.
Looks great and works great.
Instructions are sparse, but it was pretty easy. Fit is perfect!
Outstanding choice for the price!
There are large gaps in both front corner where you can see daylight. The kit included 2 different types of rubber weather stripping, but the instructions didn't show where or how to install it.
Jenny N.
6/11/2024
Randy, I had our manufacturer take a look at the pictures that were sent and asked about the weather stripping. What was recommended is to use the weather stripping that came in a roll. Either one will work however go with the one in the roll. As for the openings that you are seeing, they are normal. If you find that you have excessive water entering the truck bed please let us know.
Seems a solid and well-built product, especially considering the very good price. Only weak point might be the system used to fasten the rails to the bed, which, on my Chevy with the factory plastic bedliner, anyway, leaves them feeling slightly wobbly. This is very much the nature of these "no-drill" systems, though, and so I don't much mind that I will probably end up screwing or bolting the rails to my bed. To be clear, it works fine as it is. Nice product!
I purchased this because the Bakflip I had extended too far into the 5'9" bed of my Sierra when folded, and interfered with my fifth wheel hitch. I was skeptical of the etrailer brand, but found both the design and construction superior to the Bakflip. I especially like the straps on the latch release of each section. I took off one star because the latches on the rear-most section do not consistently catch, but this has not been a problem.
Do you have a question about this Tonneau Cover?
Condition: Installed
Notes: Item has been previously test fitted and has minor cosmetic signs of install.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
10/10/2024
Hey John! Could you send me some pictures showing me what you are describing? I really want to look into this for you.