To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Most soft covers make you open the whole bed just to grab a small item near the cab. The Deuce 2 solves that with a unique dual-action setup. The front 30" section lifts from either side so you can reach your toolbox or gear without rolling the whole thing up. When you need full space, the entire cover—bows and all—rolls up behind the cab and secures with Velcro straps. It’s a practical setup that keeps your cargo protected but out of the way when it’s time to haul something big.
Covers that sag or tighten with temperature changes can look rough and let water in. The Deuce 2 has a built-in automatic tension system with floating hook technology that keeps steady tension in any climate. The Velcro along the rails moves with the fabric, so it stays smooth and taut through heat, cold, and everything in between. You don’t have to adjust it manually, and it keeps a clean, low-profile look year-round.
Rain, sun, or snow—this cover is ready for it. The Deuce 2 uses industrial-strength, vinyl-coated, leather-grain fabric that won’t shrink or crack in cold weather. Its black powder-coated aluminum bows and rails are rustproof, so they stay solid and corrosion-free over time. The three-part hinge keeps the front section from creasing when folded, so the cover keeps its shape and stays looking good even after years of use.
Keeping your gear dry matters, and the Deuce 2 handles that with continuous rubber seals at the front and rear and extra seals along the side rails. Together they block out dust, moisture, and road grime so your bed and cargo stay clean and dry in any season.
Installing a cover shouldn’t be complicated. The Deuce 2’s angled side rails clamp to the inside lip of the bed rails—no drilling required. The header guide holds the cover assembly in place, lining everything up cleanly for a snug, secure fit that’s ready to use in minutes.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Andy: Hello everyone. I'm Andy and today we're going to take a look at the TruXedo Deuce 2 Soft Tonneau Cover here at etrailer.com. If you're a truck owner and you're looking for an easy installed, very versatile tonneau cover, this would be a great choice for you. Now let's take a look at the vinyl cover that we have on this tonneau cover. As you can see, it is a very durable, very sturdy. There are two support bars that run throughout.
Now we don't recommend sitting or standing on the top of this. It is strictly to protect any type of valuable equipment or a toolbox let's say that you might have in your truck bed. So now we're going to take a look at some of those features. We will let down our tailgate and there is a latch located here that will relieve the back portion here. And from there, we can go ahead and roll up the cover all the way to our bed here.Having these support bars is nice because it keeps the rest of the cover stable when you are folding it.
And also now you can see, I have plenty of room. If I was hauling any type of longer items furniture, wood, whatever it be, you have plenty of room and this rolls up nicely. There are straps here as well to secure that from moving as you're driving. The finish on the rail system is a nice and high quality. It will hold up for a long time.
The durability of it, it's very sturdy. And as you can see here, this is our hinge point whenever it comes to having the fold-up option, just be aware whenever you are folding it up or you're rolling the tonneau cover back into the flat position, then nothing is obstructing that in order to get in the way if you we're to access with it folded up.And if you do not have the provided track system from the factory, these same clamps will work when it comes to mounting the rails on your truck. With the tonneau cover in the rolled up position here, you can see where there is the mounting point to access the flip-up option. There is a lever on the backside of the cover closest to the window. And whenever you move that you'll see that it pivots and that will allow you to fold up the cover and access the back portion of the bed here.
Now, if you we're going to access the locking mechanism to prevent the levers from moving, if somebody was to try and access this back portion, you would want to do so with the tonneau cover rolled up. That'll allow you to make that adjustment to the lock knob.Now to access this back portion and fold it up if you happen to have a toolbox or anything, you're going to move the latches that are near the window towards the passenger side. And from there, you can lift up and then fold the cover back. Now you have all this space and room here, whether it's a toolbox or any other type of equipment, you're able to get that in and out of the bed. Now with it in the folded position, here is something I wouldn't recommend when you are driving down the road, you have the possibility for the cover to get pulled off, might cause some damage to your vehicle or to other vehicles as well. The nice thing about this cover is having this seal here to protect anything from the elements that will be in the bed. Also, it does come with a impact pad here when it comes to loading your tailgate into the upright position. Make sure you use our fit guide when it comes to finding the specific size for your specific truck. They all will look like this whenever they are finally installed. This cover is going to be very easy to use whenever you are by yourself. When it comes to rolling it up, everything seems to roll very evenly even with the two support bars. As you can see that rolls nicely and evenly on both sides of the truck bed.Now the TonneauMate Toolbox that we have here is a great match with our tonneau cover. We weren't able to use it with this vehicle since it does have the OEM toolboxes already installed, but this would be a great match with this cover. With that being said, the overall installation process was very straightforward and very easy with minimal tools needed. It does have a very nice sleek look and finish to it. If you happen to have anything of value that you want to protect from the elements or have that option of versatility when it comes to moving taller or larger items, this is going to be a great option for your truck. One of the benefits of having the soft tonneau cover instead of let's say a harder one that folds up or lifts up, you will benefit from seeing out of the back glass.So you have full access and view from your rear view mirror. Also when it moves into the role up position it sits on top of the bed, that still does allow you to have that rear view through your glass with allowing you to have maximum bed space when it comes to hauling any equipment or gear. So if you're trying to decide between a hard cover or a soft cover, some of the benefits with the soft option is going to be whenever it is rolled up, and if you're hauling or storing anything in your bed, you are going to have the most view from your rear view when it comes to anything behind your vehicle, as well as maximizing your bed space. Everything will be stored on the top. Now, if you have a retractable one, sometimes there's a canister that's in the bed and that could obstruct with anything that you're trying to load or unload.Okay. So overall, some of my final thoughts about this tonneau cover are, I like the option of it just rolling up or folding up. It gives me a little bit more versatility than let's say a structured or a solid tonneau cover that way I can access anything that I might have in the back. It's also very easy to use if since I'm by myself most of the time, using the latches is very easy because it works on just one side for both of them or when it comes to rolling it up, I can do that so well as well. The other thing that I like about this tonneau cover is the vinyl top. It's going to protect everything that I have that's in the bed from the elements. And it's also going to be very easy to keep clean. I can either wipe it off or hose it off, whichever one that I would prefer. And that was a look at the TruXedo Deuce 2 Soft Tonneau Cover. I'm Andy. Thank you and have a great day.
Ratings & Reviews
Good value functionality balance. Installs easily. Easy front access makes this cover extremely functional for small items placed in the front of the bed.
Decent cover not totally leak proof leaks in on both front corners not excessive but does leak. the front latch doesn't work well have to release one side then walk around to release other side easy roll up roll out easy install
This soft Tonneau Cover is well designed and looks great.
Great Tonneau cover. Has held up since I purchased about 1 year ago (that included over a Minnesota winter!).
I have had this cover for a few months now ... Makes a big difference in fuel mileage, and love the fact that I don't have crawl all the way in the back due the front flip up feature on the front of this cover.... It's awesome, took me less than an 45 minutes to install after watching the video !
For a soft tonneau cover, it's very durable, no fading after a year, and no issues with noise while driving.
Front opening allows easy access to tools that I keep in the front of the bed. Fast shipping and competitive pricing by Etrailer!
So far I love this tonneau cover. Great product.
I love the style and the way it works with my under cover tool box the mounting is great. The only downside is that the cover itself is starting to peal and rip any help with this issue from etrailer would be a great help.
Perfect for my lifestyle at work. I’m in and out of the toolbox all day, so the easy flip function is very convenient. And the roll up function is needed when I haul trailers & materials. Overall, it looks great, and it provides protection and security for the tools in my bed without disrupting accessibility.
Very happy with it. Installed easily and have really enjoyed it. The truck is parked outside and the cover is usually in the stowed position and is holding up very well after a year. I really enjoy it when traveling with our travel trailer as it protects and conceals our cargo area, I also enjoy the front section that folds back allowing access to my low profile tool box.
Like it . Hinged front is the best part , front fuel tank can be filled and also access to everything in front of wheel wells can be reached ,of course running boards to stand on is necessary to reach stuff . When pulling 5th wheel I roll it half way from the back and then put a ratchet strap across between tie down rings that are in the stack pockets , this is over the roll so that it does not go anywhere in the wind . The box on pickup is a full length 8ft so it worked out well . A color of neutral gray would be nice , that would maybe reflect some sun from making it like an oven underneath .
I purchased from etrailer due to the excellent videos they produced of the various options.
I chose this one due to the front opening portion of the cover since I have an 8' bed. This is well worth it to be able to access the front of the bed without having to roll it up to reach the front.
Great fit! Quality product. The vinyl is nice and thick.
The info I received using eTrailer was accurate and complete, as well as the videos they provided for installation......which was very easy and only took about 30 minutes to complete. Since then, the cover has held up well, though the truck has been stored inside most of the time. Soon it will be outside for several months but since the cover is both sturdy and of high quality, I expect no problems. I'm very happy I bought this for my truck.
Really like this cover. Opens and rolls up easy with integrated supports. Storage straps. The best part is the cab side opening. Makes access to the storage container I keep at the front of the bed easy. Only slight knock on it is that a very little amount of water gets in the corners. Not enough to be concerned about.
Very easy install with good instructions. It keeps the stuff in the truck bed dry - even in our constantly wet PNW winter - and we don’t have to tie down lighter gear to keep it from blowing away. I especially like the front flip up and use it all the time for fishing and camping gear that I don’t want to have in the back of the truck bed with the gasoline or crabbing gear.
One year post install review. No problems with the installation, the cover or the mechanism. I think I readjusted the tailgate end closure/latching mechanism once after 7 or 8 months. I try to clean and treat the cover on e a month but it doesn't always get done. The fit and finish still looks new when it's clean. Pricey cover but it's holding up well. Cat tested daily. Thankfully they don't claw it.
I’ve had one on my work truck for a year now. I’m in and out of my bed mounted tool box and transfer fuel tank several times a day. The easy flip back is very convenient when I’m getting in and out! I also haul a 5th wheel camper trailer, so the roll up function is also a necessity. This tonneau cover matches my lifestyle perfectly and has proven itself to be very durable.
This cover fit perfectly on my truck and was able to be mounted over my installed fifth wheel hitch with plenty of clearance. My two deciding factors in choosing this cover were that it would install over my hitch and that it gave me the ability to fill an in-bed fuel tank (not yet installed without having to roll it up from the back. This cover met both of those qualifications. I took a picture of the cover partially rolled back to the pivot point on the fifth wheel and I put a tape measure in the jaw so that you can clearly see that there is almost 2" of clearance between the hitch and the cover.
Thanks to input from the folks at etrailer, I have a Tonneau cover that fits my needs. I pull a 5th wheel trailer and I have 50 gallon auxiliary fuel tank/tool box combo. I needed the cover out of the way when towing and I wanted quick access to my tool box or when refueling. When it’s closed, the tonneau cover keeps my truck bed and whatever I’m hauling, dry and secure. The mounting system keeps the cover tight at any temperature. I’ve been in -23* to 105*, covered thousands of miles, with no issues.
Great cover, replaced the exact same one I had for 9 years before the vinyl started to fail. The ability to open from the front is the best feature, giving access to the entire bed without having to roll the cover up.
My only criticism is the installation instructions could be better. Many steps had illustrations that were unclear and a text explanation would have been helpful.
I like this bed cover. The one on my F150 fit better but I still recommend.
I love it. Easy to install ind it looks great as well as hides my RV hitch. Put this one on my 2021 Ford F250.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.