To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This cover combines rigid aluminum panels with a bonded vinyl top layer to create a strong, weather-tight surface that still looks sleek. The layered ArmorTek design keeps gear protected from rain, dust, and snow while holding up to years of use without fading or sagging. The matte black finish sits about an inch above the bed rails for a clean, low-profile look that blends with the truck’s lines. Users mention that even after heavy storms, the bed stays dry and the cover still operates smoothly.
When you have to haul tall equipment or long boards, you can retract this cover fully or stop it every 12 inches along the rails. The spring-loaded system opens easily with one hand using a small handle under the rear plate, and a pull strap lets you close it again just as quickly. Because it rolls into a compact canister at the cab, it doesn’t block the rear window or take up usable bed space. Owners like how simple it is to operate and how it clicks securely in place whether partially or fully closed.
The integrated T-slot rails set this model apart. You can mount a roof rack, ladder rack, or bike rack directly on top without drilling into your truck. The T-slots run the full length of both side rails so accessories can be positioned exactly where you need them. This setup is perfect if you want to carry kayaks or ladders above while keeping the bed covered and secure underneath.
A network of exterior and interior seals plus front and rear drain tubes helps push water away from the bed. The angled canister channels runoff to attached tubes that route water through factory drain holes—keeping moisture from pooling inside. Rubber rail seals contour tightly to the bed caps, while endcaps overlap the tailgate to block dust and debris. Even through car washes or heavy rain, cargo stays clean and dry thanks to this layered sealing system.
You don’t need to drill into anything to mount this cover. It clamps inside the bed rails with two clamps per side and includes kickstands on the rear clamps to level everything out before tightening. Once aligned, it sits flush for a tight seal and smooth operation. Many owners say they were able to install it on their own in about an hour using basic tools while getting a solid, professional fit right away.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
This cover was easily installed. So far, it functions perfectly. Glides easily to open and close. I love the fact that is closed partially every 12 inches. Should help to keep things a little drier when towing my fifth wheel.
It's a well built tonneau cover. It was very difficult to install, but I got it done. It operates good and looks good. The only drawback, is it leaks water bad. In the spring, I'll silicone around the front two drain lines at the roller box, and on the top rear roller box cover plate. Hope it helps.
Received the Pace Edwards UltraGroove Retractable Hard Tonneau Cover in a box that was destroyed! The contents made it okay, except I did not receive the truck bed stake hole covers. I'm sure etrailer will make good on it as they have great customer service! However this review is for the cover and although the cover seems okay....the instructions totally suck! For $[XXXX] dollars, I expect more!
This is my second Pace Edwards UltraGroove, I really love it. I traded in my last truck and this topper was on it and still ran smooth after three years of opening and closing it thousands of times!
Really makes the truck look great! Easy to install when using the video.
All contents came undamaged and I am waiting for a nice day to install it on the truck
Pace Edwards ultra groove is an awesome hard roll up tonneau cover. Beats other competitors pricing. Installation was a little more involved for one person and instructions were hard to follow, but all good things take time. Very pleased with the install, definitely buy it again
Arrived quickly, fit and works as expec ted.
The cover is awesome. Installation took a little longer than expected. The removal of the tie downs in a new truck with lineX was challenging. The brackets that replace the tie downs weren't useful. They are supposed to support the box for the cover within a slight gap which could be filled with included shims. Installed as shown in the directions, the brackets left a 2" gap which I had to make. By the time you get that far in the install, you're too committed to try and figure out if the instructions were bad, what other way the brackets might work as expected etc. It was superficial at that point and I created my own shims from pressure treated wood. Love the cover though. It operates very smoothly and looks great on the truck.
easy to install and a great product for the money
I am very happy with this cover now that I have it installed. The cover is great, the directions not so much. Thankfully Brittany from etrailer sent links to some videos which helped tremendously with the installation. I did have difficulty with one side locking when fully closed and could not find any trouble shooting information in the directions or videos but did find a set screw that allowed me to adjust the stop and everything works quite well now. I love that the cover retracts smoothly and latches securely while still allowing for a ladder rack. Nice fit and finish.
The cover is excellent, but the installation instructions are pretty vague, and leave a lot out. Watch the eTrailer videos, they're much more helpful.
Installation Tip - After you prop up the canister on something at the front of the bed, take the box that the rails came in and lay it perpendicular across the bed between the tailgate and wheel wells. That way you can lay the rails on it when installing them to the bed, lest everything comes crashing down once you get the first rail on and then try to get the second one on! Ask me how I know! :)
Ordered and it was at my home in 3 days and installed in 1/2 day by myself I took my time following instructions no drilling no marring just a fine tight tonneau cover that looks great on my new lariat dually
Quality product that fits my requirements. However, I would ask for clearer installation instructions.
Quick delivery, solid construction, easy assembly, beautiful result. Delivered in two boxes, rails in one, rollup cover in another. Well protected in the boxes. Parts included replacements for truck bed popouts with drain holes pre-cut. Quality parts throughout. Instructions were a little hard to follow but it is just a straightforward mounting process. Easy to do in two to three hours.
I was a little nervous about calling because I know there was going to be some looking up stuff on the computer and I’m not that good at it, but Eli was very patient with me and made my transaction a lot easier and made me feel a lot better and confident that we bought the right one tonneau cover.
This is my second truck with this cover only difference is the second truck has an 8 foot bed. I LOVE THIS COVER!! I like the low profile and the way it clicks in every 12 inches which allows me to close it somewhat with no issues. We have a 5th wheel and can cover the bed a little and keep things more dry. Installation is very easy just need patience and time. Cover was delivered on the worst weather day, very rainy. Cover was packaged very well and contents were in great shape when I arrived home. Great job etrailer and love when you have problems someone is there to answer the call and very friendly and helpful.
Fit great easy install. Quick delivery couldn’t ask for more
Absolutely love this product!
Great products,great prices,fast service,have not installed yet but checked out their video,good tips,looks like a quality tonneau cover
I really like this cover after owning it for a year. Adam was a big help when I bought it and works very well and has ultra low profile which I like. I like the way it can snap into place and not only full open or close. Installation was pretty easy. We own a fifth wheel and this cover works excellent for our needs.
Really like this Edwards Ultra Grove Tonneau cover. Does everything I wanted it to do. Keeps my cargo dry, fairly secure, it wouldn’t be easy to break into. I installed it by myself self in about an hour. etrailer Installation video made install easy.
Took my time installing it. For the most part no problems. I see some concerns around the tailgate. (Sealing) I like the ease of retracting and opening it. With tailgate locked, its very easy to open with a flat putty knife. Overall I Like the appearance and the way its constructed. Only had it a few days so time will tell.
Ron F.
8/8/2021
I enjoy it very much. I added extra foam to seal around tail gate. After a good rain or thru the car wash, it still doesnt leak. I highly recommend this product.
Do you have a question about this Tonneau Cover?
Condition: Missing Parts
Notes: This item is missing the rails. It is only the cover that is included. It makes a good replacement part.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Norman
1/12/2025
This product is great, I love this tonneau cover and has work flawlessly. When Im towing I can pull it closed 1 click to help with the wind and it has been great. I appreciate Etrailer with helping with this purchase and we are looking to upgrade our truck and when we purchase our new one I want to purchase this same cover again. It does take away alittle from the bed but the 5th wheel hitch in summer pretty much makes my bed useless anyway.