To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you need to grab something from the bed, you can open the tailgate and release the spring-loaded EZ-Lock clamps to lift the rear panel in seconds. The middle panel folds up just as easily, so you can uncover two-thirds of your bed for bigger loads or fifth-wheel towing. For full bed space, just undo the Jaw-Grip clamps at the cab and lift the whole cover off—no rails or extra hardware left behind.
You don’t have to deal with separate rails, bolts, or drilling. The Trifecta Signature 2.0 uses built-in T-style clamps that fold out from the frame and hook under the bed rails for a solid hold. Once clamped down, it sits about 1" to 1-1/2" above the rails for a flush, finished look. When you want to remove it, just unclamp and lift—it leaves the bed completely clean for hauling gear or equipment.
Rain, snow, or dust won’t stop this cover from keeping things protected. The premium vinyl-backed canvas is permanently attached to the aluminum frame so it won’t shrink or flap in the wind. Snap-on rubber seals run along the edges to help block out water and debris. The matte black finish keeps its sleek look through heat, cold, and heavy use.
The aircraft-grade aluminum frame with a black powder coat finish resists rust while staying light enough for one-person removal. Glass-filled nylon hinges and clamps add strength where it counts, keeping everything tight even after years of folding and unfolding. With durable construction backed by a lifetime warranty, it’s made for everyday use in any season.
Position the folded cover at the front of your bed, tighten down the Jaw-Grip clamps at the cab, then unfold and secure the rear panel with the EZ-Lock clamps at the tailgate. Both clamp styles are built into the frame, so nothing gets lost and no tools are needed. When locked down with your tailgate closed, your cargo stays secure and out of sight.
Alternate Instructions
Ratings & Reviews
Love it so far! Easy to install, take down and put back up.
Cover has held up well. Have a couple of areas where it looks like an animal tried to chew on it but otherwise still great
The cover is exactly what I was looking for. It’s easy to remove, lightweight and high quality. No leak issues either. Would definitely purchase again!
Have to say that this is not the greatest money I've ever spent. I had another one on a short bed and it worked great. This one I have to say is junk the do in the summer leaves just enough water on it that it actually sinks in and leave the puddle on it and it's not very tight it's not very square doesn't fit my bed very well and I'm just not happy with it.
After one year it still looks like it just came out of the box. Easy to use and looks great.
This product is the best out there! I have had this on my truck for a year and it still looks new and working perfectly.
Excellent fit-- extremely waterproof, cleans easily w detergent
East to install. Have had it for year, still looks brand new. Easy to keep clean, no fading. Love the ability to fold it, but not remove it to put things in the bed of my truck. But have removed it for larger items, and is is simple and tasks only a few minutes. Great buy and look forward to using it for another year.
Great product. Fast shipping. Very sati sfied.
This cover is so much richer looking than a plain vinyl tonneau cover. The canvas cover never looks dirty. It is just a great cover.
This is my first tonneau and I am very happy with how easy it is to install and how versatile it is. Having used a canopy for years, this suits my current needs perfectly.
Great tonneau cover! Fits well, easily flips up for access or to haul something sticking up out of the rear of the truck bed. Only takes 30 seconds to completely remove if hauling something bigger in the bed. After a year the vinyl backed canvas has not shrunk, is still a deep black and has not faded at all.
Great fit, very easy to install, appears to be very well made. There is no noticeable flapping or movement of the cover at highway speeds. Love that there are no installed side tracks allowing a quick return to original bed if required. Bed and contents stay dry even when parked in the rain.
I love this cover. Very easy to install and when you need to remove it, also very easy. Looks great. I paid about $100 more by buying from etrailer. Go to Extang and buy direct, much cheaper.
This is my second Tonneau cover from Extang. The first was 1.0 I like the look of the 2.0 better, but the functionality of the 1.0 seems better to me. One of my tailgate-end hold-downs keeps sticky, and I have to futz with it to get it to clamp. I also wish the next version would have a way to keep the front straps from sliding from their useful position when the cover is down. In the end, if I buy another pickup, the first accessory I buy will be another Extang!
One year and no rips, stains, or fading. Also, easy to take off and put back on when we use our truck bed tent. But, I still haven't figured out when to use those two extra strap clips. Don't need them to tie down the folded cover, don't seem to attach to the truck bed. I guess it's just a tonneau cover mystery.
Installation on my 2019 Honda Ridgeway was a snap following Utube instructions. Bed remains dry in heavy snow and rain , even at highway speeds. Easy to remove and store during summer months when I am hauling bikes.
Very nice quality and price. It was very easy to install and remove. It keeps the elements out of the bed of the truck.
This is a very good quality durable cover on a long bed Ford. It has held up with 12" of snow on it and kept items dry on a 4k mile trip. I highly recommend this cover
Second Extang canvas cover we have owned. Think they look better and hold up excellent, fit was perfect and easy install and remove in a minute if we have to. First time dealing with e-trailer and everything was flawless, thank you! 2018 Toyota Tundra Crewmax,1 year review.
The Extang tonneau cover has been great. 3rd one we’ve owned. The canvas fabric is a little different than the last 2 but seems to be holding up well. Easy to install/remove. We would buy this cover again.
Excellent cover for my F350 (2019, Short Bed). Still looks new after a year. Good things:
- Easy installation with good fit.
- Keeps bed and contents dry. (I also love my BedRug XLT, so a small amount of water wouldn't be noticed anyway.)
- Quick and easy to fold to cover front 1/3 of truck bed (< 1 minute).
- Easy to remove (< 3 minutes).
- Very little movement, even at freeway speeds.
- Cleans easily: Blow off dust. Spray off bird droppings.
- Looks good: Much better than cheapie vinyl covers.
Not too difficult to install and this has been a real help to me in protecting items when travelling. Plus it looks great. A screw connecting a cross bar to the frame came out after about 9 months, but it was an easy size to replace.
Good price. Reasonable shipping time. Fit is perfect on my 2026 Honda Ridgeline. The online tutorial was spot on. I have ordered from etrailer for years. Everything has always been excellent and this cover is no exception. I highly recommend etrailer.
So far, so good! The instructions can get kind of confusing though since they are general for many types of truck beds. Mine is a 2013 Totyota Tacoma with the 6' bed. For this truck bed, you need to install the brackets on the utility rails for the 4 fasteners to lock onto. Set the brackets in a way that the fasteners are centered on the brackets; that way you can make minor adjustments to the position of the tonneau cover without having to re-position the brackets themselves.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.