To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need to grab something from the bed or load taller gear, the Trifecta Signature 2.0 makes it simple. Open the tailgate, release the spring-loaded EZ-Lock clamps, and fold the rear panel forward. You can open two-thirds of the bed for large items or lift the whole cover off completely for full access. The built-in buckles secure it neatly at the cab so it stays put while driving.
Some covers need a pile of hardware and drilling to install. This one doesn’t. The Trifecta Signature 2.0 uses a self-contained clamping system—no separate rails, bolts, or tools. Jaw-Grip and EZ-Lock clamps store right inside the cover and attach directly to the included brackets in your truck’s factory rail system. When it’s off, nothing is left behind, so the bed stays clean and ready for work or hauling.
Rain, sun, or snow—this cover is built for it. The matte black canvas skin is vinyl-backed for strength and flexibility, with snap-on rubber seals that keep out water and road grime. It’s permanently attached to the frame so it won’t loosen or flap in the wind. The tight weave and textured finish keep their look through years of use without the shrink or stretch you get from standard vinyl covers.
You want something solid but easy to handle, and this cover delivers. The frame and bows are made from aircraft-grade aluminum with a black powder coat finish to resist rust. Hinges are glass-filled nylon with protective padding, and the fiberglass-reinforced clamps lock the cover down securely when the tailgate is shut. At about 35 lbs, it’s light enough to lift off solo yet tough enough for everyday use.
Installation is quick and straightforward. Threaded aluminum blocks slide into your factory rail system, the brackets bolt up with two bolts each, and the built-in clamps do the rest. No measuring, drilling, or extra parts—just line it up, tighten by hand, and you’re done. The whole thing comes fully assembled and carries a lifetime warranty, so once it’s on, you just fold, latch, and go.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Since 1982 Extang has been perfecting the truck bed cover. For over 10 years the Trifecta's been the best selling soft folding truck bed cover in the world. Now we are proud to introduce the all new Trifecta 2.0 like the original the Trifecta 2.0 is incredibly simple to use. To close the cover, unbuckle the straps, fold the cover back, then secure it using Extang's all new EZ Lock Clamps. The tailgate can be opened and closed with the cover in any position. The Trifecta 2.0 keeps prying eyes out.
Locking the tailgate helps ensure that no one will get into your truck bed. The Trifecta 2.0 allows you to maintain ready access to your bed for easy loading and unloading. When properly secured the Trifecta 2.0 can be driven in the open position. For extra large cargo, the whole cover can be removed in seconds. Just release the T-handles on our new Jaw-Grip front clap and lift the cover off. This premium truck bed cover requires no assembly, no drilling and installation is as easy as positioning the cover on your truck and tightening the clap.
You can go from out of the box to on the road in just a few minutes. When closed the Trifecta 2.0 sits low on your truck bed. It's soft curves and sleek design create a smooth contoured, low profile appearance. The heavy duty, leather grained vinyl has been tested to withstand the harshest winter and summer conditions. Drawing on our decades of experience Extang has regarding-engineered the frame, hinges and corners of the Trifecta 2.0 to provide any greater durability and lasting value. The new multi-lipped seals are installed without adhesive and have a crisp, straight appearance that provides the best seal available for incredibly effective protection from the elements.
The frame is the strongest and best looking in the industry, made from lightweight, aircraft-grade aluminum. The frame is painted black to match the vinyl. Extang's all new EZ Lock Clamp features an exclusive spring-action handle that locks the cover to the truck when you release it. Our new Jaw-Grip front clamp grips each side of the bedrail, creating both lateral and downward force, providing a secure installation without damaging your truck. It attaches securely to the truck bed without distorting the bedrail. Extang is committed to quality and stands behind the Trifecta 2.0 with a best in class lifetime warranty.
Trifecta 2.0 premium soft folding truck bed cover is the perfect compliment to your truck. The Extang Trifecta 2.0 is the number one choice in truck bed covers.
Ratings & Reviews
Gwendolyn Y.
2/16/2025
Hey Deadra. I'm glad that you are still loving your cover even after a year of having it. Hopefully no more screws find their way out.
Deadra
2/18/2026
Still loving this cover. Still looks great. Ive taken it off several times to carry oversized items or beds full of mulch. Occassionally I tighten the bed back down in front as it works a little loose. But a loose cover only means that rain can seep in easily. Otherwise it keeps things happy and DRY.
Steve
10/31/2021
Excellent
James
4/19/2023
Still looks like new. Be sure to use fabric protector to help make it last.
Nancy
2/16/2024
I am still happy with the tonneau although I wish it didnt leak around the edges. I live in the rainy Pacific Northwest so keeping water out is very challenging.
Mike L.
2/17/2024
William
3/24/2019
Still works great. Color hasn’t faded, latches still work well. Very happy with the cover and Have recommended it to friends who love theirs as well.
Tom
9/18/2019
It is still working great and looks Brand New still. Thank you for a Great Product!
Daniel
3/17/2022
Great! Just like new.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Curtiss M.
9/24/2026
In 92026, after more than 7 years of good service, one of the covers hinges started to split. I checked RealTrucks website and read the lifetime warranty. I sent an email with my claim details, and to my surprise they approved and sent a brand new cover within two business days. The new one seems to have a few improvements, but installation was still simple and result looks great! Overall, RealTruck Extang has outstanding support and service that went far beyond my expectations.