We'll connect you with nearby partnered installers who know this exact setup.

Extang

Extang Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl

Part Number: EX87XR

72 Reviews | 2 Questions

In Stock

$519.99

Retail:$672.18

You Save: $152.19

Not Confirmed to Fit

2001 Pontiac Sunfire

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

extang tonneau cover tailgate lock vinyl ex87xr

extang tonneau cover fold-up - soft vinyl manufacturer

Show All (3) Product Images

Show Fewer Product Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

The Trifecta 2.0 tonneau combines the look of a soft cover and the convenience of a hard, folding cover. Tri-fold, vinyl cover has a rail-free design, and it includes a self-contained, easy-to-use clamping system for fast installation and removal. Great Prices for the best tonneau cover from Extang. Extang Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl part number EX87XR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (72)
Q & A (0)
Related Parts
Photos

Extang Tonneau Cover - EX87XR

Highlights

Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
Keeps Gear Protected: Vinyl cover and snap-on rubber seals help block rain and dust.
Quick On/Off Setup: Built-in clamps install or remove in minutes with no tools or drilling.
Full Bed Access: Tri-fold design opens two-thirds or lifts off completely for big loads.
Lasts Through Weather: Aircraft-grade aluminum frame and fiberglass-reinforced clamps resist rust.
Sleek, Low Profile Look: Leather-grain vinyl and smooth frame give a clean, contoured finish.

Features to know about

Quick Cargo Access: Tri-Fold Design

When you need to grab gear from the bed or load up something tall, the Trifecta 2.0 makes it simple. Just open the tailgate and release the spring-loaded EZ-Lock clamps to flip the rear panel open. Fold the panels toward the cab to free up two-thirds of the bed or remove the cover completely for full access. It’s quick to switch between a protected bed and an open one without tools or extra steps.

Extang Trifecta 2.0 tri-fold tonneau cover shown closed and folded open on a pickup bed to demonstrate its easy folding design for cargo access.

Clean Look, No Hassle: Self-Contained, Rail-Less Design

Unlike many covers that leave behind bulky rails or hardware, this one is completely self-contained. All the clamps and hardware are built into the cover itself, so installing or removing it takes only minutes and leaves the bed clean when you’re done. With no drilling or tools required, it’s easy to go from work use during the day to a sleek, covered bed at night.

Close-up of the Extang Trifecta 2.0 tonneau cover clamp being attached to a truck bed rail, showing the built-in rail-less mounting system.

Built to Last: Aircraft-Grade Aluminum Frame

The Trifecta 2.0 uses a strong, lightweight frame made from aircraft-grade aluminum with a durable black powder-coat finish that resists rust. Reinforced nylon clamps and rugged MAX hinges add strength at every point. The heavy-duty, leather-grain vinyl skin is permanently attached to the frame, and the integrated corner tuck system keeps the tarp tight and smooth.

Detail view of Extang Trifecta 2.0 tonneau cover construction showing aluminum frame and heavy-duty leather-grain vinyl fabric.

All-Weather Protection: Snap-On Rubber Seals

Rain, dust, and snow stay out thanks to rubber seals that snap securely around the cover’s perimeter. These seals fit tighter and hold better than adhesive types, helping keep the bed dry. The vinyl skin is tested to handle extreme heat and cold, so it stays flexible through every season while maintaining that factory-clean look.

Easy On, Easy Off: Jaw-Grip and EZ-Lock Clamps

Setup is simple with pre-installed Jaw-Grip clamps up front and EZ-Lock clamps at the rear. The Jaw-Grip design attaches directly to the bed flanges without modifying the bed cap, while the spring-loaded EZ-Lock clamps automatically secure the rear panel when released. When the tailgate is closed and locked, the cover stays secure—no extra locks or adjustments needed.

Close-up of the Extang Trifecta 2.0 Jaw-Grip clamp securing front panel of tonneau cover to a truck bed rail for no-drill installation.

Close-up of Extang Trifecta 2.0 EZ-Lock clamp attaching rear panel of tonneau cover to truck bed side rail using spring-loaded locking handle.

Extang Trifecta 2.0 soft tri-fold vinyl tonneau cover shown fully closed on a pickup truck bed, highlighting its clean, aerodynamic design.

Specs

Weight

Approximate weight: 35 lbs

Warranty

Lifetime warranty

92658 Extang Trifecta 2.0 Soft, Folding Truck Bed Cover

Installation Details EX87XR Installation instructions

This Product Fits The Following Vehicles

2020 - 2027 GMC Sierra 2500 8 Foot Bed
2020 - 2027 GMC Sierra 3500 8 Foot Bed
2020 - 2027 Chevrolet Silverado 2500 8 Foot Bed
2020 - 2027 Chevrolet Silverado 3500 8 Foot Bed

4.4

72 reviews

5 Stars		(46)
4 Stars		(16)
3 Stars		(5)
2 Stars		(2)
1 Star		(3)

by: Victor 07/28/2026

2026 Chevrolet Silverado 3500

by: Randy 08/25/2026 One Year Later

Only gave 4 stars before cover was 1 inch too short. Quality, ease of installation and use is great, just didn’t fit right.

by: Ken 05/23/2025 One Year Later

love the cover. quick releases are only on the back. Harder to remove fully when needed

Ken One Year Later

5/26/2026

its good, still wish the quick releases were on all 4 corners. real pain to reach in for front releases

Chris R.

5/26/2026

@Ken Glad it's still doing it's job and completely understand the desire for the quick releases, really appreciate the feedback!

by: B-Rad 07/29/2024 One Year Later

It has been a while since I received my bed cover and I still love it. I had a custom cover made for a 1986 Mitsubishi Mighty Max Pickup. The fit was amazing and it enhanced the look of the truck ten fold. I use to have a snap bed cover and I had all the snap holes filled and repaired before installing this new cover. The new cover came with support bars under the cover which is a great feature, But after time the bars have started leaving an impression on the cover that shows on the surface. Other than that, I am totally satisfied with everything else.

Click to Enlarge

by: Dave 04/11/2018

2018 Ford F-150

I have tried a few other brands in the past and am very impressed with the ease of installation and how secure this cover is. Compared to Velcro models I feel this cover has a huge advantage when traveling in high wind conditions.

This is the second time I have bought from etrailer and have been very impressed with their follow up and service. Their prices are as competitive as anyone too. I’m sure I will buy again from etrailer in the future!

Click to Enlarge

by: Howard 04/22/2026 One Year Later

In use for one year. No wear and tear. Looks great. Works great. Thanks.

by: Craig 01/23/2026 One Year Later

Two of the panels have delaminated and bubbled. It looks terrible. They didn’t even last three months in Florida. You should provide customers a warning notice that your covers don’t do well in hot climates. I tried reaching out to you in an email product support question, but never got any response back from you. I’m sorry I wasted my money on this cover.

Click to Enlarge

Lazer S.

1/27/2026

Sorry to hear that, Craig. I can't say I have heard of one of these failing so quickly, so I am surprised. That said, the picture you sent is of a hard folding cover and what you ordered is a replacement for a soft folding cover. Is the picture of a different cover? And then also, can I ask who you contacted exactly? I checked your account and your email address, but I could not find anything sent in. Did you use a different email address by chance?

by: Daniel 02/28/2026 One Year Later

Definitely does not fit as good as the original one.

by: Paul L. 06/16/2019

2019 Honda Ridgeline

The product arrived ahead of schedule and after having watched your install videos I was able to install it without needing the written instructions. It looks great.
The instructions that came with the cover did not show how the bracket mounted on the Ridgeline, but the video you guys produced covered it well. The only issue I had was that the Honda bed upper front hold down point brackets did not fit over the Tonneau Cover brackets, so I left them off. This may be because they strengthened the cover bracket by putting a notch in it. My plan is to grind the Honda bracket to allow space for the obstruction.
Thanks again I am thrilled with how easy it was!

Paul L. One Year Later

6/17/2020

Very happy with cover, was very easy to install. Keeps everything in bed dry and hidden. Easy to remover for larger loads. Looks great still. All in all was a fantastic experience with product!

by: Kyle 03/27/2019 One Year Later

Dodge Dakota

I've had this extang trifecta tonneau cover on my Dakota for over a year now and absolutely love it. It fits perfect and doesn't leak. It's still in great condition, even after the crazy hot summer and frigid winter here in new england. It still functions perfectly as well.

My previous cover was a snap button type and there were over 40 buttons to snap or unsnap to put the cover on and take it off. This trifold cover makes life so much easier.

I definitely recommend lubricating the threaded rod that's on the slide handle to make sure you can easily pull to lock or unlock the last portion of the cover.

Great cover!

Kyle One Year Later

3/27/2020

Product worked great for the time that I had the truck it was on. The material didnt fade from the sun and it never tore or scratched if something hit it. I definitely would purchase again.

by: BURNIE S 12/12/2015

The installation is as easy as it said it was and it fit perfect. It is a great looking tonneau cover and reduced the in cab noise which is a benefit I had not even considered. The shipping and tracking while in route was outstanding, it arrived way before I expected it this time of year. I would recommend it to anyone.

Burnie S. One Year Later

12/11/2016

It is a good product. I really appreciate the ease to open the cover when you need an open truck bed

by: Cliff B. 06/07/2018 One Year Later

1997 Ford F-250 and F-350 Heavy Duty

Great product. Easy bolt on installation front hitch receiver. makes it easier to get my trailers in the back yard in such tight spaces.

Cliff B. One Year Later

6/7/2019

Still love it, Still working great.

by: Robin 04/07/2026 One Year Later

Biggest piece of junk I ever bought. Does not work as advertised in video on 8 foot bed. Supposed to be able to be installed/uninstalled by one person standing on the ground, impossible. I sent pictures of me standing on the 3rd step of a ladder still unable to reach the clamps. etrailer said its not their problem as it is a vendor video even though it is on their website. Of course the only way to know this was to place it on the truck. etrailer says since I placed it on the truck it was considered “installed” and could not be returned. Besides this, the mounting hardware is cheap junk, easily damaged. It flops like a flag going down the highway so much it can be heard in the cab of the truck. I spent hours documenting the issues, sending pictures to etrailer, trying to return it. DO NOT WASTE YOUR MONEY ON THIS POS!

Kate F.

4/9/2026

I am very sorry to hear that install was more difficult than anticipated. A lot of companies do have an install policy, it was on there for more than one day which is why we can't take it back. Once again, my apologies that you are not more pleased with the cover, this is not the typical feedback I get on this product.

Robin

4/14/2026

@KateF Not as sorry as I am! I am out $600 for a product that does not work as advertised. If it worked, I wouldnt have tried to return it in the first place! It cannot be installed the way depicted in the video, it is impossible. The front clamps cannot be accessed by a person less than 7 feet tall. One person cannot install/uninstall it alone as depicted in the video. The video depicts a short bed truck. You sold me a cover for an 8 foot bed. It cant be done. I sent many photos showing this but it was ignored. It wasnt “difficult”, its not possible with only one person! Watch the video and try it yourself. “Not Typical”? I expect that you dont get this feedback on short beds which may be the bulk of you sales. You are an etrailer expert? If you really were then you would know what I saying os true. Go on, try it yourself. I am a Mechanical Engineer with over 40 years of design experience so stop patronizing me. The video misrepresents the product and by not acknoweging this is the same as lying to the customer. An insincere apology doesnt help at all.

by: Ethan 01/16/2019 One Year Later

2014 Toyota Tacoma

I have owned this cover for a year. It rides on my 2014 Tacoma. Overall, I'm satisfied with the purchase, but I do have a few minor gripes.

1. The metal brackets that ship with the cover are clearly "universal" as in "they fit universally badly on all makes of pickup." I had a machinist friend cut the unnecessary edges off of them and round the corners to spare my knuckles when I was tightening the cover screws in place (near the cab) to install/remove the cover. This was a worthwhile improvement (if you have a bench grinder and/or a machinist friend).

2. After about 6 months of use, the cover seems to not want to sit in the center of the bed anymore. It rides to one side, which doesn't render it useless, but is annoying and doesn't look great. I loosened the front screws, reseated it in the center and it ended up on one side again after a couple of weeks. As it is mostly an aesthetic issue, I just gave up.

3. The foam cushions under the hinges are starting to tear where they rub on the edge of the bed. Not a big deal, but not a great sign for quality and longevity.

Things I like:

1. Compared to the roll-up kind (owned two in the past), this is very easy to open and close.

2. In hot and cold weather, the vinyl remains taught, and it held up fine under significant snow last winter.

3. It's really not a lot of work to fully remove the cover--you'll just want to make sure you leave it behind before you go, because it's still large when fully folded.

4. It keeps things pretty dry (at least as dry as other tonneaus I have owned).

5. Despite my gripes about the included mounting brackets, I do really like that the cover mounts to the Tacoma's bed-mounted channel system without totally compromising the adjustable Toyota attachment points. With the cover brackets installed, you can't slide the attachment points all the way forward and back, but you can slide them forward and back between the cover's mounting brackets, which provides a few useful positions.

Overall, given its value and general utility, I would probably buy this cover again.

by: Gale C 10/24/2024

2006 Ford Ranger

This cover fit my 2006 Ranger just fine. Very light weight and easy to install. It is also very nice looking. Worth the money.

Click to Enlarge

by: RDW 10/28/2020 One Year Later

Held up so far after 1 year of ownership and 1 Maine winter.

Pros: Fit and ease of install. Completely removable in 2 minutes with no tools. Bed stays almost completely dry. Material has stayed in good condition no rips tears waves or fading.

Cons: Air gets under it no matter how good the seal is.

Rdw One Year Later

10/29/2021

still remains in like new condition after another year and another Maine winter.

by: Wade M 07/10/2018 One Year Later

2017 Chevrolet Silverado 1500

The tonneau cover is simple and fast to remove and put back on and that was an important consideration in deciding which one to buy. The slowest part of installing it is positioning it evenly on both sides. It is necessary to remove when mounting my racks for hauling kayaks. I also remove it when hauling firewood to keep from possibly damaging it. I have noticed some water drops in the truck bed after raining between the second and third sections on the truck bed rail. Tightening the rear clamps up might fix the leak but I haven't tried it yet. The rear section does not fit snug against the bed rail. Over all I am pleased with the product.

by: Triple J Ent. LLC 05/13/2024

2020 Ford F-150

Received cover prior to expected, fit was great, install was as stated and simple. Good product, very well designed and more durable than I thought it would be

Click to Enlarge

by: Mike B 08/27/2017

2012 Ford F-250 and F-350 Super Duty

The tonneau cover is great! A perfect fit and a quality product. It was drop shipped directly from the manufacturer and I still got it very quickly. Thanks for another great experience trailer!

Mike B. One Year Later

8/28/2018

One of the best quality tonneau covers I have owned. Still holding up great after a year.

by: Jim B. 07/11/2019 One Year Later

Had it installed for almost a year and do like it. Two complaints: (1) even with the cover installed correctly as I'm driving at highway speeds I can see the cover rippling (like ocean waves) from the air leaking past the rubber seal, and (2) when I open lid to the built in storage box in the bed of my Honda Ridgeline the left side of the lid rubs up against the tonneau cover metal bar somewhat rubbing off the black paint.

by: Brian 10/23/2018 One Year Later

2017 Ford F-150

Initially I received a damaged unit, a small puncture in the cardboard shipping container also had rendered a small hole in the soft top. A pickup order and a replacement were sent immediately. The unit has preformed above expectations. Carwashes and 20,000 miles of cross continent travel, and our gear stays dry. Thumbs Up!

by: Mike L. 08/03/2020 One Year Later

Excellent quality product. Simple to install (if you use etrailer instructions. The instructions that came with the cover were wrong (different vehicle?). The only con is that to use the full bed for tall items one has to remove the cover which is a slight pain.

by: Tom B 04/16/2023

2022 Ram 2500

I ordered the Extang Trifecta 2.0 Tonneau Cover due to the fact I had an Extang Trifold cover on my former vehicle. I received 10 years of service with this cover no tears or issues. No the truck was not a garage Queen. Spent its entire life exposed to the Northern Ohio weather. After placing my order I received a phone call from Marti at Etrailer informing me that there was a 20 day lead time for manufacture of cover. She wanted me to be informed in case I would like to change order. I went ahead an OK'd the order. The cover arrived within a week of order from the manufacturer. Another good job completed by Etrailer! By the way the cover looks great! Fits as expected!
Thanks Again

by: Robert 09/09/2022 One Year Later

2016 Nissan Frontier

Very happy with the cover; good quality and has held up well after a year. Installation was very frustrating as the brackets that came with the cover did not match the instructions and it looked like the brackets wouldn't work at all. I Contacted Extang and they sent me the correct instructions. A picture is worth a thousand words and the install went smoothly after that. But why not just put the correct instructions in the box?

by: Neal 10/02/2018 One Year Later

Product fits well. The rear spring loaded latches work but feel flimsy. I am concerned about how well they will last. The forward tiedown latches fit, but in my opinion should have a rubber/plastic lining in the part that hooks onto the truck bed lip. I am putting in plastic to product truck paint.

true

Show More Reviews

See what our Experts say about this Extang Tonneau Cover

Do you have a question about this Tonneau Cover?

Will the B&W Companion Fit Under a Tonneau Cover on a 2022 Chevy Silverado 2500?
While we have not tested the B&W Companion Hitch # BWRVK3710 with the BAKFlip MX4 # BAK24FR on an 8-foot bed 2022 Chevy Silverado 2500, there are things we can look at to give you a good idea of compatibility. The first thing to note is that the Companion has three hitch height settings, with the lowest being 17 inches. We also know the BAKFlip MX4 will sit approximately 1-1/2 inches below the top of your Silverado's bed rails because this is a low-profile cover that installs inside the...
view full answer...
Will The Extang Trifecta Work On A 2025 And 2026 Chevy Silverado 3500 With An 8 Foot Bed?
Hey Dave, I am not sure if there is a bug on or site, or it was just recently updated. The Extang Trifecta # EX87XR that you mentioned is a confirmed fit for both the 2025 and 2026 Chevy Silverado 3500 with an 8 foot bed. There is a chance just due to the truck being new we were waiting on confirmation from the manufacturer that it will fit the new model. Which it looks like we did get confirmation and it will fit. It looks like there were no major changes in the new year vehicle so...
view full answer...

Do you have a question about this Tonneau Cover?

Info for this part was:

Updated by:

Wilson B

Written by:

Matthew S

Edited by:

Daron K

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.