We'll connect you with nearby partnered installers who know this exact setup.

BAK Industries

BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl

Part Number: BAK39130

46 Reviews | 12 Questions

In Stock

$1,299.99

Retail:$1,399.34

You Save: $99.35

Not Confirmed to Fit

2017 Chevrolet Traverse

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

bak industries tonneau cover tailgate lock bak39130

bak industries tonneau cover roll-up - hard tailgate lock revolver x2 roll up aluminum and vinyl

Show All (13) Product Images

Show Fewer Product Images

In Use/Installed

2023 gmc sierra 1500 tonneau cover bak industries roll-up - hard tailgate lock revolver x2 roll up aluminum and vinyl

2023 gmc sierra 1500 tonneau cover bak industries tailgate lock bak39130

2023 gmc sierra 1500 tonneau cover bak industries tailgate lock on a vehicle

2023 gmc sierra 1500 tonneau cover bak industries roll-up - hard aluminum and vinyl on a vehicle

2023 gmc sierra 1500 tonneau cover bak industries aluminum and vinyl bak39130

0 tonneau cover bak industries roll-up - hard tailgate lock revolver x2 roll up aluminum and vinyl

Show All (6) In Use/Installed

Show Fewer In Use/Installed

Videos

Feature Review BAK Revolver X2 Hard Tonneau Cover

DIY Install: BAK Revolver X2 Hard Tonneau Cover on your 2023 GMC Sierra 1500

Show All (2) Videos

Show Fewer Videos

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

The Revolver X2 tonneau combines hard cover strength and security with soft cover convenience. The heavy-duty aluminum and vinyl cover sits flush on your vehicle and rolls up for full truck bed access. Easy, no-drill installation. Great Prices for the best tonneau cover from BAK Industries. BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl part number BAK39130 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (46)
Q & A (0)
Related Parts
Photos

BAK Industries Tonneau Cover - BAK39130

Highlights

Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
Hard Cover Keeps Gear Safe: Aluminum slats lock along the rails when the tailgate’s shut.
Full Bed Access in Seconds: Rolls up and straps behind the cab for oversized loads.
Built to Last: 1/4" thick rustproof aluminum slats hold up to 400 lbs evenly spread.
Keeps Cargo Dry: Matte rubber seals and drain design limit water seepage.
No-Drill Install: Clamps to bed rails using a wrench—no holes required.

Features to know about

Secure Storage in Any Weather: Aluminum and Vinyl Construction

When you need to keep your gear safe from rain and sun, the Revolver X2 holds up. Its 1/4" thick, aircraft-grade aluminum slats are covered with textured black vinyl that resists UV damage, impacts, and bad weather. Even though it looks like a soft cover, it can’t be cut through like one, and it supports up to 400 lbs of evenly distributed weight when closed. Rubber seals line the rails, cab, and tailgate to help keep out water so your cargo stays dry.

Under-front bracket installation of BAK Revolver X2 tonneau cover showing hinge rail connection

Full Bed Use Without Removing the Cover: Roll-Up Design

When you need the full bed for large cargo, just pull the release cable and roll up the cover. The Revolver X2 rolls evenly every time thanks to its hinged aluminum slats. Built-in nylon straps and plastic buckles secure it behind the cab while you drive, and four rubber bumpers keep it from touching the cab. Because it mounts inside the bed rails, you still have access to stake pockets for tie-downs or rack mounts.

Pickup truck with BAK Revolver X2 tonneau cover rolled up to show full bed access

BAK Revolver X2 tonneau cover rolled up and strapped behind pickup cab

Simple, One-Person Operation: Latching Side Rails

You don’t need to wrestle with snaps or Velcro. Just roll out the cover and press down on the rear slat at the tailgate. The latches automatically engage along both sides, locking the cover down from front to back. When you close and lock your tailgate, the bed and cover are both secure. To open it again, drop the tailgate and pull either of the two release cords—both sides release at once for quick access.

Person pulling release cord to open BAK Revolver X2 tonneau cover on pickup truck

Clean Look That Stays Tight: Low-Profile Fit

Unlike bulkier covers that sit high above the rails, this one sits nearly flush for a smooth, factory look. The aerodynamic design helps reduce wind drag while driving, which can also help with fuel mileage. The matte black finish blends in nicely and stays tight without sagging or rippling over time.

BAK Revolver X2 tonneau cover showing low-profile fit with truck bed rails and open stake pockets

Quick Setup: No-Drill Installation

Installing the Revolver X2 is straightforward and tool-light. The aluminum frame rails clamp to the inside of the bed rails—no drilling needed. Pre-installed shims and slotted brackets make it easy to get everything squared up, so once you tighten the bolts for the front hinge rail, it’s ready to use without extra adjustments.

Mounting plate used for aligning BAK Revolver X2 tonneau cover frame on truck bed

Close-up of clamp securing BAK Revolver X2 tonneau cover frame rail to truck bed rail

Animated demonstration of BAK Revolver X2 hard roll-up tonneau cover opening and closing on a pickup truck bed

BAK Revolver X2 hard roll-up tonneau cover shown closed and rolled up behind pickup cab

BAK Revolver X2 tonneau cover partially rolled open on truck bed showing durable construction

Underside view of BAK Revolver X2 tonneau cover showing locking blocks and felt strips

Close-up of locking lever on BAK Revolver X2 tonneau cover for secure tailgate closure

Specs

Construction

Material: Aluminum and vinyl
Aluminum slat thickness: 1/4"
Aluminum type: Aircraft-grade, rustproof
Finish: Black powder coat
Vinyl skin: UV-resistant, textured black
Cover composition: Hinged aluminum slats with 1-piece vinyl top layer

Capacity

Weight capacity: Up to 400 lbs of evenly distributed weight

Fit and Compatibility

Profile: Flush - inside bed rails
Compatibility: Stake-pocket-mounted accessories and raised side rails
Operation: Roll-up - hard cover
Opening location: Opens at tailgate
Rack compatibility: Yes
Tailgate lock integration: Secures cover and truck bed when tailgate is closed and locked

Installation

Installation type: No-drill, clamp-on
Tools required: Wrench
Mounting location: Inside of truck bed side rails
Included hardware: Frame rails, mounting plates, bolts, pre-installed shims and spacers
Adjustability: Slotted brackets allow rail alignment adjustment

Sealing and Protection

Seals: Matte black rubber seals on side rails, cab rail, and tailgate
Weather protection: Helps prevent water seepage
Felt lining: Protects vinyl top and shields hands from temperature extremes
Rubber bumpers: Cushioned barriers between rolled cover and cab

Diagram showing interior rubber bumper placement on BAK Revolver X2 tonneau cover

Operation

Latching system: Built-in latch mechanism at tailgate with rotating side rail locks
Release mechanism: Dual release cords at rear slat corners
Securing method (rolled up): Sturdy nylon straps with plastic buckles
Cover engagement: Rear slat press-down locks cover along full length
Adjustment: Levers are gusset-reinforced and require no adjustment

Technical diagram showing BAK Revolver X2 tonneau cover locking and latch mechanism

Appearance

Profile height above bed rails: Nearly flush (less than 1/2")
Color: Matte black

Warranty and Origin

Warranty: 3-year limited warranty
Country of origin: Made in the USA

39130 BAK Industries BAK Revolver X2 Hard Roll Up Truck Bed Cover

Installation Details BAK39130 Installation instructions

This Product Fits The Following Vehicles

2019 - 2026 GMC Sierra 1500 5-3/4 Foot Bed
2022 - 2022 GMC Sierra 1500 Limited 5-3/4 Foot Bed
2019 - 2026 Chevrolet Silverado 1500 5-3/4 Foot Bed
2022 - 2022 Chevrolet Silverado 1500 LTD 5-3/4 Foot Bed

4.4

46 reviews

5 Stars		(32)
4 Stars		(6)
3 Stars		(3)
2 Stars		(3)
1 Star		(2)

by: Bob B 11/21/2016

2003 Chevrolet Silverado

The rollback cover is excellent. It is designed well, and went on my 2003 Silverado easily and it fits well. The only negative I have with my new cover is when it arrived from the manufacturer (BAK), it was full of aluminum chips. As I unrolled it to install it they were wrapped into the cover. I was getting aluminum chips everywhere. The cover had them rolled in the fabric cover, I got them on/in my hands, and on the painted surface of my truck. That was my only concern. eTrailer.com is to be commented on their commitment to customer service. They kept me informed on the progress of the tonneau build continually. Thanks to all at eTrailer.

Click to Enlarge

Bob B. One Year Later

11/21/2017

Still water resistant, works well, and looks great

by: James 01/16/2018 One Year Later

I like the idea of this cover rolling open or closed and the fact it locks when closed. Problem is the plastic guides that push into the aluminum rails do not stay in place. When rolled open and strapped down bouncing down highway the weight of the cover pushes these plastic guides out and allows seal to be damaged and to come out of its grove. I had to insert pieces of wood into the track to hold guides in place at front of track. I pull a 44 ft toy hauler around USA so cover stays rolled open for weeks at a time. The weight of rolled up cover smashes the guide pieces out of place. In the picture that’s paint stir sticks with foil tape on them so they stay dry.

Click to Enlarge

by: FREDERICK_C 08/02/2019 One Year Later

Overall I'm satisfied with the product, but for the price I expected a little better attention to detail. The fit and finish leaves something to be desired. All the parts are just cut and are not finished or cut evenly for that matter (see pics). It gives the overall feeling of a hastily finished product. Plus I've already to replaced some parts due to breakage. Fortunately they were rreplaced free of charge. But it does the job and fits my needs, so I'm giving it 3 stars.

Click to Enlarge

by: Keith C. 02/29/2016

2013 Nissan Frontier

I ordered a BAK Revolver X2 Hard Tonneau cover for my 2013 Nissan Frontier pickup truck. Navigating the website was easy, I liked the price and the free shipping that were offered. I immediately received tracking information for my item so I knew what to expect. The item arrived on time and was professionally packaged and undamaged during shipment. The installation instructions were easy to follow and the kit included everything necessary to complete the installation, which took approximately 30 minutes. The cover looks great and works great. I am a very satisfied customer.

Keith C. One Year Later

3/12/2017

Hi Laura - I am still pleased with my BAK bed cover. I dont like it quite as well as the previous version I had on my other 2013 Nissan Frontier truck which got stolen, hence the new cover, but I am still pleased with the product. The new cover doesnt roll or latch quite as smoothly as the old one, but it still works well. They also slightly changed the clips for anchoring the rolled up cover, and I find them harder to clip in and maintain tension on the strap, but again they do work. Thanks for following up.

by: Sean M. 04/10/2019

Great tonneau cover! It's amazing how easily a well made product installs. I replaced my soft folding IMPORTED tonneau cover with this sweet piece and I can honestly say I now understand the difference in price. The Revolver X2 fits flush, looks great, closes securely, and just makes me feel a little cooler knowing it's back there ( I need all the help I can get). Bottom line, I was apprehensive spending so much for a tonneau cover but now that I did I will shout from the rooftops "YOU GOTTA GET ONE OF THESE REVOLVER X2s!" etrailer is a no-brainer as well, you can buy BAK tonneau covers from dozens of other retailers but I know etrailer, I trust etrailer, and I know if there's ever a problem (which I doubt there will be) etrailer will be there to fix it.

Sean M. One Year Later

4/12/2020

Its still holding up well and it looks as good as it did the day I installed it. I have no regrets about making this purchase.

by: Robert 02/15/2026 One Year Later

Easy to install and works better than expected!

by: Kyle R 05/21/2019 One Year Later

Toyota Tundra

I couldn't be more pleased by this tonneau cover except if they found a way to make it magically disappear into the cab when I want to use the whole bed. It did its job throughout both summer and winter, keeping snow and rain out of the bed of my Tundra. By virtue of its unique rolling design, it's also one of the few options compatible with my TracRac: I can fully roll and unroll it no matter where the racks are placed.

Kyle R. One Year Later

5/22/2020

My judgment has not changed. This cover is still excellent. If I ever get a different truck, this will be among my first accessory purchases.

by: Deborah Debbie 02/26/2025 One Year Later

It’s a great fit on our Ford Maverick. It is very easy to open up when we need to haul larger items and very easy to close when more room is not necessary. We are extremely happy with this cover and etrailer.com.

by: Mike 12/31/2018 One Year Later

We bought (2) of these covers a year ago and would definitely highly recommend them. This is a well thought-out, nicely featured and well designed product of excellent quality. In the past we used Velcro strip hold-down "tarp-type" Tonneau covers in the past and will never go back. These covers roll up effortlessly and very quickly compared to the Velcro type. And, (as long as you keep the lock-down bar & track clean) they just as effortlessly roll out, lay down, lock down, and stay down - no stretching and having to take time working to get the tarp tight so that it doesn't "flap" in the wind. Wonderful product.

by: Martin 03/03/2019 One Year Later

2018 Honda Ridgeline

Clean look and easy to use. Still very satisfied with my purchase after 1 year. I installed it on a 2018 Honda ridgeline. My only complaint is when I purchased the product, it took them 3 delivery to provide the right attachment parts for my vehicle. Poor workmanship from the manufacturer. This problem as nothing to do with etrailer, which I'm happy with.

Martin H. One Year Later

3/4/2020

Well, not so happy with the product. The carpeting fell off on the underside of the cover. Also the right side of the cover towards the tailgate shrank. Its been a few months since I started to have those issues and should of contacted you earlier for warranty. Hopefully its not too late for a warranty claim.

by: Brent 12/16/2024

This is the worst tonneau cover I’ve ever dealt with in my life. The latching system is complete garbage. I have it adjust as far back as it can go and it does not leave the latches closed. You hit one bump one the road and it slides off the latch and the sides come up with any little gust of wind. I am currently on my 4th warranty claim with them in 11 months second full cover replacement. Wish they would just give me a refund.

by: Timothy 12/28/2018 One Year Later

I am really glad I bought this cover. I looked and looked and ended up with this hardtop aluminum roll-up cover. It was easy to install, fits well and is secure. I am able to roll it up and snap it down and still pull a fifth wheel without having to remove the cover, a big plus.

My only issue is the tie down buckle and straps are poorly conceived. The snaps should be redesigned for easier access and use. One of the snaps broke early on and I had to find a replacement.

by: Rod C 02/17/2016

I purchased both the Bak Revolver 2 Tonneau and the B & W adapter for my companion 5th wheel hitch from trailer.

Both the product and service was great

by: Logan 07/22/2018

2016 Chevrolet Silverado 3500

Secure straps for when the tonneau cover is rolled up ripped out of the washers holding to the frame. Tarp pulled away from rubber seal causing water leak. Latches on the side of the cover dont always latch into the track.

by: David 01/29/2019 One Year Later

The roll up cover has performed very well in cold temperatures and warm. The top is water proof even when sprayed at the car wash. I like the security provided when the tailgate is locked. Overall very happy and would purchase this again.

by: Larry 09/09/2022 One Year Later

I have found the cover easy to install. It still works fine 1 year later. It is easy to roll up using one hand. The only problem I experienced so far is occasinal failure of the wire to release the cover on the driver side of the cover when operatred from the tailgate on the passenger side. Its otherwise been a perfect product keeping even the worst rain and snow out of the back of my pickup.

by: Ed C. 08/30/2017 One Year Later

GMC Sierra

This BAK RevolverX2 tonneau cover is a high quality product that has performed well on my GMC Sierra 2500HD, it keeps my cargo safe, relatively dry and I save fuel. what more could ask for in a product.

by: Ronnie E. 06/08/2020 One Year Later

I purchased this cover about a year ago for my 2019 Nissan Titan. I was happy with the appearance, it makes the truck stand out like no other. I can store things in the back, like luggage when traveling and it is secured and it will not leak. The cover itself is pretty sturdy, I have sit about 100 Lbs. on it and it doesn't bow in. I have the leather edition and it is easy to clean. It looks new even after a year, But maintenance is required to keep it looking good. Just keeping it clean and leather conditioner keeps it looking spectacular.

by: Matt 11/21/2020 One Year Later

Perfect for the hard working truck fans! Great quality for the money! I love the fact that I can completely conceal my tools and gear without sacrificing the full use of the truck bed! Highly recommend!

Matt One Year Later

11/22/2021

Couldnt be happier! Great quality product!

by: Tom M 04/20/2021 One Year Later

The felt-like lining that lies on underside of cover (and acts as cushion for rolling?) had bad glue job. This material came off in under 1 year. Appears that the glue was not meant for hot weather, as it came off in summer heat. Disappointed. Mfg website does not provide instructions on what glue to use to reattach, so had to experiment to find glue that would work to reattach. Perhaps in future they should use mechanical attachment instead of glue method...

by: Adam 07/11/2023 One Year Later

I have had this cover for one year and I would not buy it again. I read the reviews about how terrible this design is in climates that has freezing temps, but I live in New Orleans so freezing rain and snow was not a concern.

Turns out it’s not just cold weather and ice that ruins this, so doesn’t the sun and heat. The vinyl cover that you see when the cover is down is glued to a bunch of aluminum pieces and this design allows it to roll up and down. When the sun heats up the vinyl the glue separates from the aluminum sections and the cover will not roll up or down.

Don’t get me wrong, the concept is great, but the companies execution is off. I think I bought the second iteration and if I were you I would wait until the 6th or 7th version. They are far from getting this design right.

Click to Enlarge

Jenny N.

7/17/2023

I am sorry to hear that this cover is not working out for you. Would you be able to send a picture of where the vinyl is separating from the aluminum?

by: Byron S 10/18/2020 One Year Later

Love my BAK Tonneau cover. If there was one thing I've had an issue with is in the winter the track can freeze down and stop you from opening the cover. But other then that I am very happy with it.

by: js 03/01/2017 One Year Later

2008 Chevrolet Silverado

The only issue I've experienced with this cover that I was not pleased with was it blew up from one corner during a very strong crosswind and several of the plastic rail clips broke. I consider it an anomaly since its never happened again. BAK sent me replacement parts at no cost. The repair was simple.
On the positive side the cover gives you additional security from theft due to its construction. It's expensive but I feel worth the money, especially when protection of valuable cargo is needed.

by: Will B. 10/13/2025

I question whether it's a genuine Revolver product. The fit is very poor. The quality is bad. It's not my first Tonneau cover and the one for my other truck is the genuine product. I feel this is a knock-off. There is a significant indicator also - it doesn't contain the Revolver label.

Nick S.

10/20/2025

I am sorry to hear about your experience with this cover. It is a BAK industries product that makes the revolver covers, did your not have the logo on the left side by the tailgate? What kind of truck did you install this on?

by: John 05/01/2024 One Year Later

This is the best tonneau cover I have ever owned .And I have had several different type .It has some small leaks but the only one that I had that didn’t covered the bed rails.

true

Show More Reviews

See what our Experts say about this BAK Industries Tonneau Cover

Do you have a question about this Tonneau Cover?

Which Tonneau Cover Can I Use With The Thule TracRac SR Sliding Truck Bed Ladder Rack?
Hey Jose, thanks for reaching out. The Thule TracRac SR Sliding Truck Bed Ladder Rack # TH34FR77NX will work with a pretty wide variety of tonneau covers. Basically, anything that sits inside the bed rails and does not cover the stake pockets will be compatible. Here are some compatible covers for the 2026 Chevy Silverado 1500 with the 5-3/4' bed: - BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish # BAK448130 - BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum...
view full answer...
Which BAKBox Collapsible Toolbox Fits with BAK Revolver Tonneau Cover
Hey Chuck, since the tonneau covers part # BAK39120 and # BAK39130 are BAK Revolver tonneau covers the correct collapsible toolbox would be the part # BAK92125.
view full answer...
Are REV And BAK Tonneau Cover Rails Interchangeable?
BakFlip makes the REV tonneau covers and they are identical aside from the name, as far as I know from the information I was able to gather. The rails should be interchangeable, assuming you use rails from the identical versions of each brand. It looks like you were interested in the BAK X2. This is one of their more popular models due to the fact that it is durable like a hard cover but rolls up like a soft cover. For the 2020 GMC Sierra 1500 you would want # BAK39130 for 5-3/4' bed,...
view full answer...
Hard Tonneau Cover That Doesnt Cover Stake Pockets for 2019 Silverado 1500 Z71 5-3/4 Bed
The Pace Edwards Switchblade Retractable Hard Tonneau Cover # 311-SWCA27A58 is a great tonneau cover but you are correct that it would still partly cover the stake pockets on your 2019 Chevy Silverado 1500 Z71 with the 5-3/4' bed. I did some checking and the only hard tonneau cover that gives you complete access to your stake pockets is the BAK Revolver X2 # BAK39130. The Revolver is actually one of my favorite covers because it combines the sleek look of a soft cover with the durability...
view full answer...
Ladder Rack Recommendation for 2023 GMC Sierra 1500 Short Bed with Folding Tonneau Rev Industries
For a ladder rack that fits your 2023 GMC Sierra 1500 and would fit with your Rev industries tonneau you would want the Adarac Pro Series part # A45DJ if you have a 6-1/2 foot bed or the part # A76WG for if you have a 5-3/4 foot bed. These rack install through the top of the bed rails which allows a folding tonneau cover to fit between.
view full answer...
Will The Thule Ladder Rack Work With Mountain Top Retractable Tonneau Cover?
My research tells me that the Mountain Top tonneau covers typically sit on top of the bed rails, in which case would interfere with any ladder rack including the Thule TracRac Sliding Ladder Rack # TH43002XT-782EX for your 2021 Silverado 1500 5-3/4' bed. If your specific cover happens to mount inside the bed rails then the Thule ladder rack may work, but we have not tested this so I can't say for sure if it will work or not. A tonneau cover that would 100% work with the Thule TracRac ladder...
view full answer...
What Tonneau Cover and Ladder Rack do You Recommend for My 2021 Chevy Silverado 1500?
For an amazing tonneau cover/ladder rack combination on your 2021 Chevy Silverado 1500 (5-3/4 ft. bed crew cab), I recommend the BAK Revolver X2 Hard Tonneau Cover - Roll Up # BAK39130 along with the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum # A4002965. The reason why the Revolver X2 is a great cover for your Silverado 1500 is because it mounts completely in the bed rails and leaves the stake pockets open for compatibility with a stake-mounted ladder rack like the Adarac...
view full answer...
Thule TracRac SR Ladder Rack Compatibility With Truxedo Tonneau Covers
It depends on which Truxedo tonneau cover you have for your Chevrolet Silverado. Some Truxedo tonneau covers will leave your stake pockets uncovered because the tonneau cover sits below the rails of your truck bed. If that is the case, you will still have a very tight fit between the tonneau cover and the ladder rack. We may have a Thule TracRac SR that is compatible with your 2021 Chevrolet Silverado. The ladder rack that is compatible with your vehicle depends on the length of your...
view full answer...
Differences Between BAK Revolver X2 Tonneau Covers EX39120 and EX39130
The difference is the year GM trucks they fit. The part BAK Revolver part # BAK39120 fits: 2014 - 2018 GMC Sierra 1500 5-1/2 Foot Bed 2014 - 2018 Chevrolet Silverado 1500 5-1/2 Foot Bed And then the part # BAK39130 fits the newer versions of the same truck basically: 2019 - 2020 GMC Sierra 1500 5-3/4 Foot Bed 2019 - 2020 Chevrolet Silverado 1500 5-3/4 Foot Bed
view full answer...
Which Tonneau Cover And Ladder Rack Will Work Together On 2020 GMC Sierra 1500 5-3/4' Bed?
Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-782 will fit your 2020 GMC sierra 1500 with the 5-3/4' bed. This ladder rack mounts on top of the bed rails which makes it compatible with most tonneau covers that install inside the bed rails. This said, I recommend going with the BAK Revolver X2 Hard Tonneau Cover - Roll Up # BAK39130 as this is the only tonneau cover that we can 100% say will work with the Thule TracRac. The BAK Revolver X2 has the durability...
view full answer...
Ladder Rack for 2020 Chevy Silverado 1500 5-3/4 ft Bed with Bak Revolver
For your 2020 Chevy Silverado 1500 with a 5-3/4 foot bed and the Bak Revolver # BAK39130 the Thule TracRac SR part # TH43002XT-782 for a really nice sliding rack Or for something a little more cost effective the Adarac Pro Series part # A4002965 is also a fit and would allow the tonneau to fit well.
view full answer...
Will BAK Revolver X2 Toneau Cover From 2017 Silverado Fit 2019 Silverado 1500
Your new 2019 Chevy Silverado 1500 with the 5-1/2 foot bed will require the BAK Revolver X2 Tonneau Cover part # BAK39130 like you mentioned. The bed design differs enough from the 2017 model Silverado that a new cover is needed. Unfortunately your existing # BAK39120 model will not fit. This cover is only compatible with the Silverado up through the 2018 model year.
view full answer...

Do you have a question about this Tonneau Cover?

Info for this part was:

Edited by:

Tyler C

Expert Research:

Jameson C

Installed by:

Randy B

Video Edited:

Chris R

Video Edited:

John S

Updated by:

Wilson B

Video by:

Zach D

Written by:

Jason W

Test Fit:

Aidan B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.