To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you already rely on a crossover toolbox, this cover is built to fit right behind it. The Access Toolbox Edition Soft, Roll-Up Tonneau Cover installs neatly behind most 19"–21" wide over-the-rail toolboxes and still lets you open the lid without interference. A special header bar and Element weather seal close the gap between the toolbox and the cover, keeping out dirt, rain, and snow while maintaining full use of your box and bed.
Hot summers, freezing winters, and heavy rain can take a toll on cheaper covers. This one uses double-coated, reinforced vinyl that stays flexible down to -40°F and resists fading under harsh UV rays. The contoured aluminum bows support the fabric so it won’t sag or pool water, while the reinforced vinyl flap at the tailgate helps block out moisture and grime.
When you’re loading up or grabbing gear, there’s no fumbling with multiple clamps or snaps. The Deluxe AutoLatch II automatically secures both sides when you close the cover, and the one-hand release lets you open it in seconds. With the tailgate locked (sold separately), your bed stays secure so your tools and cargo are protected when you’re away from the truck.
Need to haul something tall or oversized? Just roll up the cover—it peels back easily along the hook-and-loop sides and stores neatly behind your toolbox using premium straps and clips so it won’t rub or flap while driving. When closed, it sits 1-1/2" above the bed for a clean look that still keeps airflow smooth for better aerodynamics and can improve gas mileage by up to 10 percent.
Temperature shifts can loosen or tighten a cover over time, but not this one. The XT-Dial lets you fine-tune tension at the turn of a knob—no tools needed. The contoured, black powder coated aluminum rails mount inside the bed rails using Tight Bite clamps that lock in securely while leaving stake pockets open for tie-downs or rack accessories.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
It is exactly what I wanted.
One year in and it’s still like new! Works as advertised
Great cover. Nice fit and easy to operate. Highly recommend.
Easy installation with two people, it has worked great for us with our 5th wheel and paired with the low profile Sgl toolbox.
Love it could have better instructions had to wing it some.
It was delivered in May damaged still awaiting replacement
Fast delivery great service great product
E trailer is always my go to for trailer and truck accessories
I love the quality and the fit of this cover. It rolls up out of the way very easy every time. The clamps could be improved in my opinion. I have had to put them back in place a few times after they have shaken loose and fallen off.
Very pleased so far. My only complaint would be I wish the directions would have been better. I ended up searching in line to insure I installed the tonneau cover was installed correctly.
The best cover I can find that works with a tool box. It’s been through rain, wind, and snow. No issues. After all summer sun in Texas, the cover stretched a bit. No problem I took out the slack, it’s tight again.
Instructions could be better.
Works great with my tool box
Rick
7/30/2023
Great
The C clamps would constantly slide off the bed rails. I wound having to to drill holes and use bolts and nylon nuts to keep it secure.
We have had this cover for a year now and it’s performed beautifully. It fit on our 2021 Ford F-350 8’ bed like a glove with our toolbox in the front. It does a great job protecting our fifth wheel hitch from the elements when we aren’t towing and it easily rolls out of the way when we are towing.
This is a great cover
It installs pretty easily, and looks great. If you have a toolbox this is the cover to use. Don’t forget to use a good conditioner to help with the UV rays.
I had older version of this cover and seal against tool box was much better. New design will clearly let water in, possibly a lot if truck is parked on a hill with nose down. Rest of improvements are good, especially latch release and tightening adjustment.
This roll-up Tonneau cover is of high quality and fits my truck perfectly. Plus, it works well with my toolbox. It comes with everything needed, and it was relatively easy to install. With the help of someone else, we installed it in about three hours.
The product was the wrong size. It's discription was misleading and when it sent it back I was charged a 20% re-stocking fee.
I have been using the Access Bed Cover for a year. Installation was easy and the video was helpful. While not doesn’t make the truck bed waterproof, the cover keeps the majority of the bed dry.
Overall, Happy with this product. Relatively easy to install, however, I recommend doing it with a partner to make it easier. Fits great with my Weather Guard toolbox and gives the truck a great look overall! Super easy to open and close and provides way more security than having the bed open for all to see.
This cover is a perfect match for a tool box! It comes with everything needed to seal the front of the box and then seals for around the cover. It rolls up and the clips hold it in place as it should. The adjustment knobs make sure you will get the best fit and coverage.
Surprised by the early delivery! Installation instructions need some help, but the product is just what I wanted for our '20 F350 DRW.
Byron
10/28/2025
Cover has worked well - all that I expected it to be.
We travel a lot with our RV and frequently keep stuff in the back of the truck. I wanted something to hide it all. This cover is excellent. It looks fantastic and is easy to use (roll/unroll). Installation was okay but two sets of hands or clamps make it a lot easier. The instructions are just okay but it all worked out. The cover was a smidge short so I had to double-up on the rubber seal at the tailgate. No biggie. Also, no need to have a separate cover for my 5th wheel hitch. Very happy!
Ken
1/28/2024
After a year, the cover has been fantastic. No tears, rips or even fading. After a few months a plastic part broke but I called the company and they sent a replacement immediately. Im very happy.
This tonneau cover is great! It fits and looks perfect. The quality seems very good and should last a very long time.
Craig
4/17/2026
The cover is still going strong. It looks the same as the day I installed it. No issues what so ever.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
C M.
4/20/2022
Works Excellant, One minoe issue is the locking bar at the tailgate leaves marks on the cover when rolled up. A couple of rags ed prevent this. We use it rolled up when towing our 5th wheel.