Is it Possible to Adjust the Pace Edwards Switchblade Tonneau Cover to Fit a Toolbox?

Question

Question:

Is it possible to adjust the Pace Edwards Switchblade Hard Tonneau cover Part #. 311-SWFA19A45 so it can be used with the above referenced tool box?? This will be over my Reese 18K 5th wheel hitch when not towing. I’m aware that your Soft Rollup Tonneau cover Part # A61409 is manufactured for exactly this set up, but I prefer the security and function of the Switchblade .

asked by: Doug T

0

Expert Reply:

The toolbox that I assume you are referencing is the BAKBox 2 Collapsible Truck Bed Toolbox for BAK Revolver X2, Roll-X, and BAKFlip Tonneau Covers BAKBX92333 listed in a question for the BAK Revolver X4 Hard Tonneau Cover.

I called my contact at Pace Edwards, and they said that some customers cut the rails of the Pace Edwards Switchblade Hard Tonneau cover # 31-SWFA19A45 from the cover in order to shorten the length near the cab. While this is an option, I would strongly suggest getting another tonneau cover that is compatible with a toolbox. The Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A61409 is the best option. It has a Deluxe AutoLatch II systtem that automatically engages 2 locks when the cover is closed. If you want extra security, you can add a Pop & Lock The Gate Defender Truck Tailgate Lock # PAL9900. A toolbox that will work with the Access Toolbox Soft Tonneau cover # A61409 is the UWS Truck Bed Chest - Wedge Series - Offset Lid # UWS01048.

expert reply by: Bob C

0

Answer 1

Hey Teresa! I am not sure what monitoring system you have on your 1995 Coachman trailer but unless its a recent aftermarket addition we are not going to have any replacement parts for it. The best I can do is offer you a replacement. I recommend the…

view full answer...

Answer 2

The problem that you would run into with a folding cover such as #BAK72331 is if you leave it on but folded up flat it will be several inches above the truck bed sides. This means that when making tight turns the trailer's pin box could make…

view full answer...

Answer 3

It looks like you are referring to the Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black #311-SWFA19A45 and the Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black…

view full answer...

Answer 4

You will be able to tow the fifth wheel trailer with a BakFlip Fold Up Cover part #BAK72331 on the 2020 Ford F-350 long bed folded flat behind the cab but it will limit the cab clearance when making sharp turns with the fifth wheel. You will more…

view full answer...

Answer 5

It will if your 2023 Ford F-350 has an 8' bed. The BAKFlip F1 Hard Tonneau Cover item #BAK72331 you were looking at is confirmed to fit a 2023 Ford F-350 with an 8' bed. If you truck has the 6-3/4' bed you will need item #BAK72330. The…

view full answer...

Answer 6

The BAKFlip F1 Hard Tonneau Cover #BAK72331 can easily be fully removed by removing the 6 clamps which hold the side rails on to the bed rails on your 2022 Ford F-350 long bed. This will allow you to remove the entire cover with the side rails as a…

view full answer...

Answer 7

Hey Jeff, yes the Power Watchdog Surge Protector #HU82VR that you referenced can be used with a generator. We haven't had any issues with it and generators but I wonder if the problem is that the generators in question weren't pure sine wave…

view full answer...

Answer 8

Hey Dave! The ReCurve R3 uses a standard WDH shank so I recommend the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop #EQ90-02-4900. This has a 6" drop and is designed to fit a 2-1/2" receiver. What kind of…

view full answer...

Is it Possible to Adjust the Pace Edwards Switchblade Tonneau Cover to Fit a Toolbox?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching