See what our Experts say about this SAM Snow Plow Parts

• Replacement Back Drag Blade And Lead Blade For Western 8' Snow Plow
  For the replacement cutting / lead blade you will want to check out Replacement Cutting Edge # 3371301220 and Replacement Cutting Edge # 3371301291. Both blades are 8' long and 6" tall with 13" between bolt holes just like you wanted. The difference between these blades is that # 3371301220 has bolt holes 1" from the top of the blade while # 3371301291 has bolt holes 2-1/16" from the top of the blade (see attached photos). Then for the back drag blade the best option available is Replacement...
  view full answer...
  
• Fit of Buyer's Products 3371311212 Back Drag on Fisher HD2 Plow Blade
  My contact at Buyer's Products tells me that the # 3371311212 is a replacement for Western/SnowEx/Blizzard Snowplows, but they didn't have any infomration as to whether or not the back drag would fit a Fisher HD2 Plow Blade. They were able to send me some dimensional drawings you could compare to the existing hole spacing you have on your blade, which should give you all the information you need regarding fit and compatibility.
  view full answer...
  
• What's The Width Of Replacement Back Drag # 3371311212?
  I went out to the warehouse and measured the Replacement Back Drag # 3371311212 you were looking at and it measures 3-1/16" to the end to the middle, and 2-9/16" from the opposite end to the middle bend, or 5-5/8" total which is shown in the included diagram I made for you.
  view full answer...
  
• What Back Drag and Hardware Kit do I Need for my 8' Western Snow Plow
  I have the Replacement Back Drag for Western/SnowEx/Blizzard Snow Plows part # 3371311212 which is 8' long and will match your needs. To attach it use the Replacement Mounting Bolts for Western Snow Plow Cutting Edges part # 3371301061.
  view full answer...
• Replacement Lead Blade and Back Drag Blade for Western Pro S
  The replacement cutting edge you need for a Western Pro S plow that you have is the part # 3371301235. For a back drag plate then you'd want the # 3371311212. For a hardware kit you'd then want the part # 3371301061. We do not have curb guards though.
  view full answer...
• What Replacement Back Drag do I Need For My MVP Plow 86?
  Hello Julio, I reached out to my contact at SAM (the manufacturer) and it depends on what style you have, V style of straight blade. If your mvp plow 86 has a straight blade you want the # 3371311212, if it has the V-Shaped blade then you want the # 3371311216.
  view full answer...

Do you have a question about this Snow Plow Part?