Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle
This item does not fit your vehicle
2014 Ford Edge
These items fit your vehicle
2014 Ford Edge
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re towing a trailer or hauling heavy gear, sagging suspension can throw off your steering, braking, and headlight aim. The Firestone Ride-Rite Air Helper Springs deliver up to 5,000 lbs of load-leveling support between the frame and rear suspension. They keep your ride level and stable, improving control, distributing weight evenly, and reducing tire wear so you stay confident behind the wheel even with a full load.
Every load is different, and being able to fine-tune your setup matters. These air springs let you manually adjust pressure between 5 and 100 psi through individual inflation valves. Add air when towing or carrying uneven loads for solid control, or drop pressure when unloaded for a smoother ride. Independent side-to-side adjustment helps level off-center weight so your truck stays balanced and composed no matter what’s in the back.
The double-convoluted design with four layers of reinforced rubber, a braided wire girdle, and corrosion-resistant metal end plates gives these springs serious durability under demanding loads. The rolled crimp seal keeps the air bags securely anchored, while the rubber construction absorbs road shock and softens axle-to-frame contact to prevent bottoming out. It’s a setup built to handle heavy use without leaks or sag over time.
Installing real load support doesn’t have to be complicated. The kit includes custom-fit brackets, air springs, hardware, air line, and separate valves for manual inflation—everything you need for setup right out of the box. The brackets mount directly to your axle and frame for a secure fit, and while drilling may be required on some applications, it’s a straightforward job that most DIYers can handle with basic tools.
The construction material of the fittings may vary.
Customer Satisfaction Score:
59% were satisfied with this product
41% of customers were not satisfied
Ratings & Reviews
I recommend this to anyone with a 3/4 ton that wants stability without adding springs. It works well at giving support when I hook up to the 5th wheel. Before adding the airbags the rear suspension would settle 4 inch or more when hitching up to the trailer. Now I can control how much it settles and I get more stability and a better ride. Good system and not too difficult to install. I would have given 5 stars but I had to make three attempts to get the airlines to seal. The airlines are plastic and are a tight coil and are tough to straighten and install. I had a leak that I finally was able to remedy after several attempts at connecting. This was frustrating but I am still a big fan of this system and highly recommend these airbags. I have run with as much as 60 psi in the bags and have decided that around 40 is about right for my setup. The truck settles about 1-2 inches with about 40-60 psi.
Best airbag kit on the market! Going on 10 years and 160k miles on one kit and a year and a half on the other (two different vehicles). Firestone’s quality is excellent, their customer service is exceptional, and the kit design is simple. Quality components means ZERO air leaks in 10 years when installed properly (cut the airlines at 90 degrees with an inexpensive airline cutter or brand new razor blade). Their mounting brackets are simplified, making more room for the airbag between the axle and frame. And the double convoluted bag offers better ride quality and more suspension movement than a single convoluted bag. I’ve run a single convoluted bag setup from another reputable manufacturer and noticed a marked decrease in ride quality and comfort. I also recommend installing cradles such as those from Daystar (also 10 years on a set) to allow 100% downtravel for maintenance or off-road articulation without fear of tearing a bag. Well worth spending a little more for this USA brand kit over the cheap Chinese copy-cat kits. I tow and haul regularly - weekly, if not several times a week - and these have stood up to snowy sub freezing winters, 100 degree summer days, dusty and gravely off-highway adventures, and general use and abuse that comes from working out of a vehicle for a decade. Can’t find a better kit.
The installation was pretty straightforward, and was managed at campsite with basic tools. It is filled with Milwaukee portable air inflator and has been keeping air pressure set at. We have had good use of it to level truck after loading 5th wheel. I elected to not join both lines together so I can keep individual air pressure in case one had leak but has been fine, I might join them with optional part etrailer offered.
After 1 year and 8,000 miles has been great purchase. All bolt on, no holes to drill, I even placed fill valves in license plate to conceal installation.
Alex at etrailer was excellent as helping us find the correct kit and shipping promptly with great communication and follow up.
Really quite easy installation. Honestly, the hardest part was routing the air line. (that coiled up hose!) I ended up covering the lines with cable wrapping to protect them from any rubbing or scuffing. I also don't have a compatable hitch for the mount, and didn't want to mount them through my bumper in the license plate area because I know I would step on them at some point in time. Product had all the correct parts, high quality, and super happy with it. I wish I had gotten them sooner.
I just installed them and put them to work immediately and I am impressed so far! Installation was pretty simple, and they fit great even with an Old Man Emu 3" lift (7 leaf spring stack). It only took about 15 psi to level up the Tacoma even with 1000 Lbs of feed and a steel high rack on it and they handled that load over 50 miles of some very rough west Texas terrain. They seem to be very well made and heavy duty. Time will tell if they hold up but again, I am very impressed thus far!
I’d really love to give these a 5 star as they massively improved the ride and porpoising of my truck with a fairly heavy truck back camper. We were shorted one bit of hardware in the kit that caused a 1 hour RT drive to the hardware store for a stupid bolt. One of the hex head flange/wedge bolts for the upper mount was missing . Simple ‘miss’ by someone but was annoying . That aside everything g was great.. instructions were clear and helpful… I’d give them a 2 of 5 for difficulty installing.. any weekend mechanic can do this. The truck rides better and is safer now so thumbs up all around except for Mr Bolt pack loader!
Just what my Tundra needed to help balance load of bed and trailer.
etrailer.com and the products they offer are 100% in my opinion.
Thank You for your excellent service and follow up.
Installation was really easy except for the lower brackets that attach to a lip of metal. There was another piece of metal on the axle that got in the way but i pried and then hammered the bracket into place, squeezing it in. If I didn’t I’d still be able to get the bolt through but I bet as I tightened it down it would move the base plate and wouldn’t be lined up as well. No air is leaking so far. I didn’t buy the compressor so I might screw on some Bluetooth tire pressure monitors so I’ll get notified if pressures drop below 5psi. I have a 2023 Chevy 2500 and surprisingly with 15psi and no load in the bed it rides much better! Doesn’t hop all over the place
This installation took twice as long as it should have! The top plate had to be modified to clear the leaf spring U bolts and shock absorber bracket.
The Jounce doesn’t allow the installation of the 3/8@ bolts close the leaf spring that holds the brackets together. I’m not sure what to do with this now. I saw in other reviews where other people had similar issues. Not sure if it’s the universal bracket design vs having slotted holes like your video.
Any help would be appreciated.
Also both valve inserts had to be replaced!
I purchased this Firestone Air suspension and installed it myself on my 2017 Toyota Tacoma Access Cab 4x4. Not having a lift, I had to use a creeper and tarps under and beside the truck to do the installation. Installation was pretty straight forward after viewing the video from etrailer a few times and using the provided diagrams. You will need good 3/4" drive hand tools for the installation. An electric or air impact wrench and ratchet also speeds things up. I then installed a mini onboard compressor with remote control for in cab or outside operation. The system has never leaked air but if it did, any time the vehicle is started, the compressor will refill the system. I keep 10 lbs. air pressure in it and raise it to 20 when I haul my dirt bike on my hitch carrier and it compensates nicely and keeps the vehicle level. All good so far.
This the 3rd truck I've used and installed myself of the Firestone 5,000lb rated airbags on, and not one has ever failed on me. I used them on a 2007.5 Chevy LMM 2500 LT Silverado, a 2020 Chevy 2500 LTZ Silverado, and yesterday I put them on my 2025 GMC 2500 Denali. I did pair my new bags with an Airlift wireless compressor, which is an awesome addition to the bags. I like the fact that etrailer did a comparison video on the Firestone and AirLift bags, and they found the Firestone bags are of better quality and can support the weight of the axle if you lift the truck off the ground by the frame. If you have never installed these bags, you do not have to lift the truck off the ground or remove your rear tires. If you're like me, and do not have access to a lift, I suggest removing your spare tire, which will give you more seating area, and you will not bonk your head into it. Two thumbs up on this kit
excellent product, very easy (uncomplicated) install. anyone who is somewhat mechanically inclined can install themselves. It took me about 3.5 hours by myself with simple tools and a jack on my garage floor. Hardest part was me getting up and down from the creeper.
On my truck, (2015 GMC) i had to remove Ebrake cable brackets on both sides and reroute, not a big deal. also, did not find it necessary to remove spare tire heat shield, worked around it just fine. Routed my schrader valves through the plate screw holders for easy access.
product as described first class service
perfect solution !!!
Fit perfectly..
service was great the kit was to big for my app.
Great air bags, shipped quick!
Great kit, took about 3 hours to install. 1 lb pressure loss after a week.
After placing 23 seperate orders with etrailer this will be my final order! Dissapointed with customer service and this new generation entitlement attitude, time to take business elsewhere
Product came complete with good instructions took about 3 hours to install but did have buddies around and couple beers. Only thing I could suggest is to add a tee to so you only have to fill both air bags at one time I just ordered one online and it only cost 8 bucks so they are cheap enough.
I got them for my 2wd 05 f250 since I use it for hotshot trucking towing a 14k trailer. So far they were super easy to install they don’t leak and they are doing a great job of giving the leaf springs a break from the whooping the trailer puts on them. As a bonus they helped make the rig more stable.
Do you have a question about this Vehicle Suspension?
Condition: Badly Dinged
Notes: Parts are beat up, scratched and chipped.
Condition: Surface Scratches
Notes: Brackets have minor cosmetic scratches and paint damage. Otherwise new and unused.
Condition: Surface Scratches
Notes: Item has minor cosmetic scratches.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steven
10/20/2020
Still working strong