Custom Fit Roof Rack Kit With INK749 | INXB115 | INXB123 | INXS250
Item # IN64HR
Our Price: $485.96
Confirmed to Fit
2005 Scion xA
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (122)
- Q & A (0)
- Videos (24)
- Photos
Inno Roof Rack - IN64HR
- Aero Bars
- Crossbars
- 45 Inch Bar Space
- Inno
- Black
- Overhang
- 2 Bars
Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming.
Features:
Inno Aero Aluminum Load Bar - Black - 45" Long - Qty 1:- Low-profile crossbar lets you build a roof rack for your vehicle
- Pair with Inno feet to create a complete roof rack
- May also require a custom fit kit
- Elliptical shape helps to create an aerodynamic system with no need for a fairing
- Integrated T-slot makes it easy to slide channel-mounted carriers and accessories onto the bar
- Clamp-on accessories conveniently wrap around bar
- Flexible rubber strip keeps out dirt and allows for simple mounting in T-slot
- Press down on strip and slide accessories into slot - no trimming required
- Plastic coating on strip allows T-bolts to slide easily along channel
- Bottom channel allows easy installation to Inno roof rack feet
- Simply clip the foot into the crossbar and slide it along the channel
- Lightweight aluminum construction is durable and rustproof
- Internal extrusion provides exceptional bar strength
- Glass-blasted powder coat finish resists corrosion, scuffs, and scratches
- Matte black color
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
- Works with XS200, XS250, or INSU-K5 feet
- Pairs with 4 feet and 2 crossbars to create a complete roof rack
- Clamps are designed specifically to fit the curves of your doorjambs
- Mount to roof rack feet with bolts
- Molded pads are custom designed to fit the contours of your roof
- Protect your roof surface from scratches and abrasions
- Press onto the bottoms of your roof rack feet
Inno Aero Aluminum Load Bar - Black - 48" Long - Qty 1:
- Low-profile crossbar lets you build a roof rack for your vehicle
- Pair with Inno feet to create a complete roof rack
- May also require a custom fit kit
- Elliptical shape helps to create an aerodynamic system with no need for a fairing
- Integrated T-slot makes it easy to slide channel-mounted carriers and accessories onto the bar
- Clamp-on accessories conveniently wrap around bar
- Flexible rubber strip keeps out dirt and allows for simple mounting in T-slot
- Press down on strip and slide accessories into slot - no trimming required
- Plastic coating on strip allows T-bolts to slide easily along channel
- Bottom channel allows easy installation to Inno roof rack feet
- Simply clip the foot into the crossbar and slide it along the channel
- Lightweight aluminum construction is durable and rustproof
- Internal extrusion provides exceptional bar strength
- Glass-blasted powder coat finish resists corrosion, scuffs, and scratches
- Matte black color
Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4:
- 4 Feet let you mount Inno Aero crossbars on your vehicle's naked roof
- Pair with 2 crossbars and a custom fit kit to create a complete roof rack
- Through design helps create an extended-length roof rack that maximizes carrying capacity
- Torque tool included to secure feet to your roof
- Easy, slide-on installation to channels in bottoms of crossbars
- Locking covers secure system to your roof
- Also secure T-slot-mounted accessories to your crossbars
- 2 Keys included
- Durable, weather-resistant AES plastic construction
Specs:
Inno Aero Aluminum Load Bar - Black - 45" Long - Qty 1:- Quantity: 1 crossbar
- Weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 45" long x 3-1/8" wide x 1-1/8" tall
- T-slot dimensions: 13/16" wide x 7/16" tall
- T-slot top opening: 3/8"
- Underbar slot: 10"
- Limited lifetime warranty
Inno Custom Fit for XS200, XS250, and INSU-K5 Roof Rack Feet:
- Quantity: 4 clamps and pads
- Limited lifetime warranty
- Quantity: 1 crossbar
- Weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 48" long x 3-1/8" wide x 1-1/8" tall
- T-slot dimensions: 13/16" wide x 7/16" tall
- T-slot top opening: 3/8"
- Underbar slot: 10"
- Limited lifetime warranty
Inno Through Feet for Aero Crossbars - Naked Roofs - Qty 4:
- Weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Limited lifetime warranty
K749 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
Replaces INK234
XB115 Inno Aero Aluminum Load Bar - Black - 45" Long - Qty 1
XB123 Inno Aero Aluminum Load Bar - Black - 48" Long - Qty 1
XS250 Inno Aero Bar Through Stays for Bare Roofs - Qty 4
Video of Custom Fit Roof Rack Kit With INK749 | INXB115 | INXB123 | INXS250
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Inno Aero Crossbars Review - 2020 Chevrolet Equinox
Hi, everyone. It's Evangeline here at etrailer. And today, we'll be taking a look at our Inno Roof Rack system with the 54 inch long crossbars, the Through Feet for naked roof, and the Custom Fit Kit for your 2020 Chevrolet Equinox. If you wanna carry cool items like kayaks, or surfboards, paddle boards, or if you wanna carry a roof-mounted bike rack, or have extra cargo options with a roof box or a roof basket, what you first need is an aftermarket roof rack, just like this. So, this is designed to create that roof rack system, even though you have a naked roof on your Chevrolet Equinox. So we'll talk about how it does that, as well as how to install it, right here in this video.
So the crossbars we have here, are the 54 inch long crossbars. So there's different options for you, depending on what you're carrying. If you want the longer kit, that's gonna be this. If you want something that's more low profile, feels more flush, that's gonna be the 51 inch long crossbar kit. I prefer this length, because it gives you more overhang.
So measuring from the end of the tower to right before the end cap, we have 2 1/2 inches of overhang. So for some accessories, you're able to clamp them around the edge, and that makes it easier to reach whatever you have up on there. Now with a naked roof rack, though, you are limited when it comes to the crossbar spread. Now that's because this is custom fit, so it has hooks that fit around the contours of your vehicle. So, you wanna make sure they're in the perfect spot.
So measuring from crossbar spread, which is center to center it would sit at two feet and a half inch, so 24 1/2 inches apart. So, if you have accessories that have your clamps in a specific spot, just double check the appropriate crossbar spread to see if it fits with your roof rack. Next is gonna be the height added to the top of your roof. So, measuring from the top of the roof to the top of the crossbar, we have it at 4 3/4 inches, or about that measurement. And that's gonna be where your cargo sits.
So let's say you're carrying skis and snowboards, you're gonna have those sitting up on there, plus on top of your accessories. If you have extra large bindings, you wanna make sure you have enough clearance between your cargo and the top of the roof, so it doesn't hit your vehicle. This does have a weight capacity of 140 pounds. So, if you're carrying around your different cargo, make sure to add up the weight of the cargo and the weight of your accessory, and make sure that doesn't exceed 40 pounds. Another thing with this is that this is made of aluminum. So, that means your roof rack system itself is going to be lightweight, although your towers will probably be the heaviest part of the system. These are gonna be the Inno Aero bars, and I pretty much like how our more modern bars are designed to be aerodynamic like this. If you had the traditional round or square cross bars and you went down the highway, you would remember hearing all that wind drag and wind noise. This helps reduce that wind drag and wind noise. Plus, it has a T-track system. So once you take the end caps off, or if you don't have enough clearance for underneath for your clamps, you just slide your T-track accessories into it, you don't have to do any cutting or fitting around the accessory, tighten it down. That way you can utilize the entire 54 inch long crossbar, and you're not limited to where the clamps can fit around. So, this system utilizes the Through Feet towers, that allow you to have those crossbars that have overhang. One thing I really like about these towers, is how they have integrated locks. So, some other brands require you to add lock cores, to get everything in place and secure. This one has two keys included and four lock cores, so one for each tower. That way, with that end cap locked in place, people don't have access to the hardware to take off your roof rack. Now, this does not lock your crossbar itself, though. So if you want to lock your accessories, like the T-track accessories that are mounted onto your crossbars, you may wanna consider cable locks, locking straps, or accessories that have their own locks. So, this has a custom-fit kit. That's why it's very important to use our fit guide here at etrailer.com on our website, to make sure you get the right fit for your vehicle. So for example, we have these pads that fit around the contours of our roof. Then we also have these hooks that fit perfectly into our doors. So with everything lined up, if you follow all the measurements correctly, you can install it and then even slam your door on your roof rack without any worries. So this kit is gonna include everything you need to install it, but there's some other things that I use just to make it a little bit easier for me. One of them is gonna be the Moki doorstep. This clips right into the side of your door, gives you that extra height helpful for strapping things down. And speaking of straps, we also have the etrailer cam buckle straps. You can pick up a pair here etrailer, if you have other cargo and accessories to make it easier to strap things down and secure it. Now, the process itself may be a little bit involved, so let's take a look at that. The install process will look kinda confusing at first, and that's just how it is with naked roof racks. But that's what this video is for. Honestly, this is gonna be a very easy to do process, as long as you follow the instructions properly, and get your measurements right. So the first thing we're gonna do, is figure out why are there different numbers for the pads, as well as the hooks. And then we can figure out what our front crossbar is gonna look like, and our rear crossbar is gonna look like. I already installed the front crossbar, let's install the rear one together. So, underneath the foot pads is gonna be a number. So this is 423, and that's gonna fit right onto your towers. And you're gonna wanna make sure it faces the right way. So to make that easier, we are going to install the towers, and notice how this has tabs on top, as well as a bolt. That's gonna line up with our plate. So the plate fits right into this opening here. So you're gonna slide that all the way out to the edge of your crossbar, right over there. Then you're gonna fit the plate into that tray. So just follow or line up those tabs and those openings, and then slide it back through. Now fit your crossbar over the plate. So remember, that's going to line up with that bolt, and then use your included tool. This is gonna be an Allen key, included with your kit, to slightly tighten down that bolt onto the plate. So we're gonna put the pad onto the tower now, and if you're not sure which way it should face, there are little bolts or screws there, just line that up with the holes on the pad. It should pop right through. Then you're gonna measure for where these towers should go. So you just press on that lever on the inside, and then you push the tower through, line it up with the measurements given in your instructions, and make sure it's the same on both sides. Just double check that before you tighten it down with the included tool. Once you have those towers secured to the corrected measurements, let's go check it out on top of our vehicle. I don't put the hooks on just yet. We want this at 500 millimeters away from our center stave, or center portion of our door, so let's just get it roughly up there. So once you have everything lined up, you've double checked that your measurements are good, and you'll also see that you did this right if you can see how this pad is perfectly flushed against the ridges of our roof. So now, our next step is just to line up the hook. We have the metal washer, the plastic washer, and then the bolt. Just slightly throw that on by hand before you tighten it down. Remember when tightening down, try to tighten it down like 75% on one side, then you go to the other side, just go back and forth so you don't over tighten it and skew it. You're gonna use an Inno torque tool. So this one is set to three newton meters, so you wanna use this so you don't over tighten down your roof rack. So, you wanna keep tightening it until you hear it click, and then make sure it clicks twice. Kinda like a gap cap. There we go, that was a click. Once you've tightened down everything, and just double checked that all four towers are good and that all the pads are flush on the ridges of your roof, your final step is to put the end caps on. There's two different end caps. One is gonna be the tower, so that just kinda clips into that hinge. You have it in the unlocked position, turn it to the locked position to secure that end cap. Then you have the nice end caps for the cross bars. Those just pop right in. Do all four tower end caps, all four crossbar end caps. Once everything's in place, that's it, you ready to load this up and hit the road. And this right here was a look at our Inno Roof Rack system with the 54 inch long crossbars, the Through Feet for naked roofs, and the Custom Fit Kit, for your 2020 Chevrolet Equinox..
Customer Reviews
Custom Fit Roof Rack Kit With INK749 | INXB115 | INXB123 | INXS250 - IN64HR
Average Customer Rating: 4.8 out of 5 stars (122 Customer Reviews)
Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming.by: ft05/21/2024
Waste of money. Most annoying couple hours spent in a long time. Extremely disappointed. Does not fit well. Not exactly a cheap option, but a cheap option in terms of fit and engineering. The instructions online and in the kits do not agree. But there is no helping the design. Plus there are no universal set of instructions--they are all individual items for the fit kit, the bars, etc. But a reasonably inclined person can figure it out so no big deal, but the engineering design is garbage--requires precise measurement yet the design is such that exact measurement is impossible due to the design.
Additionally, the parts are low quality Either low density plastic or easily stripped bolts. Even when as precise as possible, I wouldn't trust it with my kayak. What a mistake. Do yourself a favor and get a Yakima trailer or similar. It isn't that much more money in the scheme of things and then it isn't tied to your car. Can add a hitch to most vehicles anyway.
by: RJK in Delaware08/26/2023
Acura MDX
Racks were perfect for my Acura MDX. They fit like a glove and I have used them several times.
by: John A.04/26/2023
Has worked great for transporting my fishing Kayak as well as small loads of lumber. It has worked fine for about a dozen and a half boards at a time or a couple of sheets of plywood. Just make sure that you have a good way to strap them down as well as maybe a rubber mat to help hold everything in place. The noise from it on the high way can be a lot but certainly not as bad as some that I have heard. I figure that anything on the outside of a vehicle like that will produce some noise.
by: Preston Ghim06/23/2023
2016 Subaru Outback Wagon
worked as expected, I used them to carry my hobie outback kayak (about 100lbs) on my Honda Civic 2016 Coupe (2 doors). They worked with no problem so far (1 year) even under high speed like 70mph.
by: Debbie11/12/2018
2017 Lincoln MKX
We recently purchased 2 kayaks & Thule roof racks from our local outdoor store.
After waiting 2 weeks for our roof racks and J bars to come in we found that the Thule racks did not fit our 2017 Lincoln MKX and they didn't make any racks that would. The vehicle does not have roof racks and has a moon roof.
After a couple of days searching the internet we discovered etrailer.com. We found the Inno roof racks, but still was not sure they would work. We spoke to a repesenative and he assured us that the racks we chose would fit and the Thule J bars we did return would also work. As you can see by the photos 2 days later we were happy Kayakers.
by: Matthew05/22/2023
This kit does not fit well. All measurements have been double and triple checked down to the millimeter. The lock on the covers interfere with the hooks. You have to apply so much pressure to get it to close that it makes the rack come loose. Not very satisfied
by: D04/06/2022
Only really used it for 2 week trip cross country, been on top of my van ever since. seems to be holding up well. Excellent customer service from etrailer; my original choice was out of stock and they hooked up a replacement in time. Thanks!
by: Mark05/15/2022
2014 Ford Flex
I bought these as part of a kit with 60" Aero bars and the appropriate kit for my 14 Flex. I spent probably an hour and a half double checking my measurements and getting them torqued down properly. I spaced the bars on top of the car just a little wider than proscribed because I was planning on carrying 4x8 plywood, and it looked better to my eye. One thing to watch for: The instructions for the car-specific kit (in my case INK263) show the foot spacing measurements for a square bar, and the measuring point for these feet and Aero bars is different. That measurement point is indicated in the instructions for the feet, not the kit. Same numbers, just different reference point. Otherwise, they look good and are rock solid.
by: Craig01/19/2023
Dodge Durango
I did a lot of searching before selecting this rack for my Durango RT (no factory roof rails). It is easy to reinstall once the initial process is followed, I marked my doorjambs with a sharpie and it is easy to set up. Great product!
by: Andrew06/14/2022
Started assembly last summer and finally completed installation this spring. Directions took a lot of attention to detail but were adequate. Rack went on car securely and looks great. Have attached kayak rack and a roof pod and both worked flawlessly. Would definitely recommend.
by: Andy10/27/2021
Dodge Durango
etrailer was the only vendor who had the custom fit roof rack feet I needed for my vehicle. I was trying to put a roof rack onto a Dodge Durango SRT...not a typical vehicle for this accessory! I looked everywhere for a suitable roof rack and thought I was settling by ordering the Inno kit from etrailer. I could not have been more wrong! I am so happy with the purchase!
by: Jeff G07/13/2020
Ford F-150
I have had countless bike racks over the years and this is by far the best system I have ever had. Fits like a glove on my F150. Easy to install, looks great and the bikes do not move when on the roof.
by: Nathan 11/06/2021
I’ve had the system in place for over a year now and haul dual kayaks often! I love it! The only thing I wish I could change is the wind noise that’s comes with it. But I’m sure with any rook rack system you get that.
by: Daren04/21/2023
Noticed box was taped up more then usual, found other manuals that was not specifically for this, and also found one of the feet already had been mounted as there was scratches on the plastic and metal parts
by: Peter 04/22/2021
Installation went pretty smoothly. The trick is to fully understand each step before moving to the next. There are a lot of small parts which at first was a little intimidating, but soon I was able to "get with it". I love the finished product and think you helped me get a good deal. Thank you for that
by: Jennifer 07/15/2021
2014 Toyota Prius
Installed incredibly quickly on my 2014 Prius V with some of the best instructions I could have ever asked for. Used the video as well in tandem and got it on the car in about an hour and a half with my partner. It was a lovely experience, which is sometimes difficult for couples to say in situations like this!
by: Christopher10/09/2022
Great product. Fit perfectly. Went together easily. High quality parts.
by: Ken 07/28/2022
Seem to be well made for the price. I didn't realize that they came with locks so that was a pleasant surprise. Easy installation.
by: Michael06/29/2020
Installation was a little tricky but once the "feet" were attached to the roof and the bars properly spaced, everything wrapped up very well.
There is no noticeable wind noise with these installed.
by: Jay 08/13/2022
There work great and were easy to install. e-trailer rocks and so does Justin.
by: Antonio 11/20/2019
Mazda
Product is great. Fits perfectly with some minor measurement adjustments. Can be assembled by one person, but helps to have two. Bought the complete roof kit and well as the Inno 80 basket for a Mazda CX3, took about two hours to assemble everything.
by: Connor 06/15/2021
It was an easy install with instructions. The rack has held up well so far and looks good on the car.
by: Blake 02/01/2021
Check out my other review and pictures...it’s all in there
by: David03/23/2022
Instructions were a bit tough at first as each box had their own instructions and you needed all 3 boxes to complete the setup, yet after over coming that, it was a breeze to put together and they are wonderful. Well worth the money.
by: Bren09/29/2020
One was extremely hard to get on compared to the others (not sure if it had some rough machining or something), but once all we’re on, all was good
25
853
Show More Reviews
See what our Experts say about this Inno Roof Rack
- Will The Roofnest Condor XL Roof Top Tent Fit On Inno Aero Crossbars?Yes, the Inno Aero Crossbars # INXB115-123 with the Inno Through Feet for Aero Crossbars - Fixed Mounting Point # INXS350, and the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # INTR152 will work just fine with the Roofnest Condor XL Roof Top Tent. These crossbars have a maximum carrying capacity of 165-lbs, measure 45" long x 3-1/8" wide x 1-1/8" tall for the rear, 48" long x 3-1/8" wide x 1-1/8" tall for the front, and is made from lightweight aluminum...
view full answer... - Roof Rack Fit for 2019 Honda CR-V With Bare RoofInno doesn't offer a fit kit for a 2019 Honda CR-V, so you'd want to go with another option. Rhino-Rack offers the most reasonably priced roof rack option for your CR-V. The rack would consist of these parts: • Rhino-Rack 54 inch Aero-Style Crossbars # RRVA137B-2 • Rhino-Rack roof rack feet, part # RRRLKVA • Rhino-Rack Custom Fit Kit, part # DK284 The rack will connect to the roof via clips included with the fit kit that clamp the feet of the rack to the vehicle roof at their connection...
view full answer... - Recommended Roof Rack for a 2022 Honda CR-V with Raised RailsThe roof rack that I recommend for your 2022 Honda CR-V with raised rails is the 2022 Honda CR-V Roof Rack by Inno. This consists of the Inno Aero Crossbars # INXB115-123, Inno Through Feet for Aero Crossbars # INXS350 and the Custom Fit Kit # IN98FR. This will provide you with everything you need for a roof rack to use your roof top carrier. It also has a limited lifetime warranty.
view full answer... - Why are Roof Rack Crossbars Different Lengths for a 2007 Acura MDX with Naked RoofYou have to consider the whole system and how the designs are different. Since they are all different the bars won't necessarily be all the same. There are some designs, for example from Inno, that have bars that are even shorter because the way the feet are designed they have to be a certain length. If you want to go with a quality aero bar roof rack the Rhino-Rack is a great choice. You will need the following parts to install it on your 2007 Acura MDX with naked roof: 2500 Roof Rack...
view full answer... - Solution for Carrying 2 Kayaks on 2018 Mazda CX-5 With Factory Roof RackYou can use a carrier with load assist like the Malone SeaWing Kayak Carrier # MPG113MD or the Malone DownLoader Kayak Carrier # MPG114MD-351XL with your factory crossbars that do not extend beyond the feet. The problem you have is the lack of space to use two. The best solution for carrying two kayaks on your 2018 Mazda CX-5 would be to use the Thule Compass Kayak and SUP Carrier w/ Tie-Downs # TH890000. Although it does not have load assist, it will fit on your existing crossbars and...
view full answer...
- Do the Malone AirFlow2 # MPG215 Fit My 2021 Mazda CX-5 with Flush Rails? I have a great solution for your 2021 Mazda CX-5 with flush rails. However, the Malone AirFlow2 - 50" # MPG215 definitively does not fit your vehicle. This is because the AirFlow2 model is designed to fit raised factory rails. With that being said, we do have an aero crossbar system that does fit. For that route, I recommend the following parts: - Inno Aero Crossbars - Aluminum - Black - 45" Long and 48" Long # INXB115-123 - Inno Through Feet for Aero Crossbars - Fixed Mounting Points...
view full answer... - Inno Feet for Mazda CX-5 With Factory Flush Roof RailsIf you are wanting to go with a Inno roof rack and you have factory rails on your 2020 Mazda CX-5, you have two options. If you want the aero style crossbars grab these bars # INXB115-123 the Inno Through Feet # INXS350 and the custom fit kit # IN53FR. If you have the square bars # INB117 you will need these feet # INXP and this fit kit # IN53FR
view full answer... - What Do I Need to Install Kayak Racks On My 2009 Honda FitFor the 2009 Honda Fit, the # Y04073 Yakima JayLow Kayak Carrier is a great option. If you have a factory roof rack, this is all you need. If you don't have a factory roof rack, then you first need a roof rack. I recommend the Inno Roof Rack # INXB115-123, # INXS250, # INK861. With these items you will have a complete roof rack system that you can carry 2 kayaks on and you will be able to add accessories to carry other items like bikes and cargo boxes. These items can be installed...
view full answer... - Recommended Inno Roof Rack Feet For A 2020 Mazda CX-5 With Flush Mounted RailsSince your 2020 Mazda CX-5 has flush mounted rails the Inno Feet for Square Crossbars # INFR you referenced wouldn't be able to slip under the rails for mounting. Instead, I recommend the Inno Through Feet for Aero Crossbars - Fixed Mounting Points - Qty 4 # INXS350 and Custom Fit Kit for Inno Roof Rack Feet # IN53FR. These two components will allow you to install some Inno Aero Crossbars # INXB115-123 so that you can complete your roof rack. I've attached a short video below where Adam...
view full answer... - 2019 Mazda CX-5 Roof Rack Recommendation for Roof Cargo BoxI recommend installing the Inno Aero roof rack system on your 2019 Mazda CX-5 flush rail roof so you can transport a cargo box: 45" and 48" Inno Aero Crossbars - # INXB115-123 Through Feet - # INXS350 Fit Kit - # IN53FR I really like this system because it is cost-effective and looks sleek, plus you won't be sacrificing quality as this rack comes with a nice aero-dynamic design and actually includes locks for the feet. The Malone Cargo12 # MPG901 is a solid choice for a roof cargo box...
view full answer... - 2022 Mazda CX-5 Roof Rack Weight Rating Differences ExplanationThe Inno Aero Crossbars - Aluminum - Black - 45" Long and 48" Long # INXB115-123 by themselves can handle 165 lbs, yes. The part that makes it a little confusing is when you get into vehicle fitment because the roof or mounting points may not be that strong for any given vehicle and parts combination. For example, when you take the parts that fit your 2022 Mazda CX-5: Crossbars - # INXB115-123 Through Feet - # INXS350 Fit Kit - # IN53FR Inno says this combination with your vehicle is...
view full answer... - Roof Rack Recommendation for 2022 Chevy Equinox with Naked RoofFor your 2022 Chevy Equinox that has a naked roof the roof rack I would recommend is the Inno Aero Bar Roof Rack part # INXB130-2, # INXS250, # IN43FR. This is a higher quality roof rack that beats it's competitors in price by quite a bit. It's still one of the nicer rack options that's going to fit well, install easy, and be quieter but it just comes in a much better price so I really like it.
view full answer... - Roof Rack for a 2003 Toyota Tacoma to Carry Canoe and LadderThe Sportrack Semi-Custom Roof Rack part # SR1005 is a semi custom fit roof rack that offers a great price but it does not fit quite as well as some of the other roof rack systems. Unless you absolutely have to have the most inexpensive option I would not recommend this rack for you. A much better option for you since you plan on carrying longer items, (canoe and ladder) would be a Roof Rack with T-Load Hitch Mounted Load bar that consists of the following parts: Inno Aero Crossbars #...
view full answer... - Recommended Roof Rack And Fit Kit For A 2008 Scion xBI spoke with my contact at Thule, and unfortunately there is not a fit kit to fit your Thule Wingbar Evo to your 2008 Scion xB. With that being said I know it's not what you'd like to do, but If you need a roof rack you're going to have to get a new setup, unfortunately. I recommend checking out the Inno Aero Crossbars # INXB153-2, with the feet # INXS250, and the fit kit # INK300. These crossbars measure 60" (152 cm) 3-1/8" wide x 1-1/8" tall, and has a maximum weight capacity of 165-lbs.
view full answer... - Longer Crossbar Roof Rack Recommendation for 2004 Toyota MatrixThe underside of the Thule Evo Wingbars like the 43 inch long part # TH711100 has a channel used for attaching to a roof rack foot but it does not go all the way down the length of the bar. What this means is that you won't always be able to install a longer bar than what Thule recommends as you may run out of channel length. I attached a picture that shows what the underside of the bar looks like. Best option would be to go with a longer bar setup that has been confirmed as a fit like...
view full answer...
- Roof Rack Recommendation for Carrying a Kayak- 2019 Ford Escape with Bare RoofI'd highly recommend an Inno rack system for your vehicle. Inno provides a super-high quality product without the higher price tag seen with other brands that might be more universally well known. High value and top quality. Given the fact that you expressed an interest in transporting a kayak, using a through-bar system makes it easier for one person to get the kayak up on the vehicle roof. Pick up one end, place against the crossbar where it extends past the roof rack foot, then you...
view full answer... - Recommended Roof Rack and Ski/Snowboard Carrier for a 2012 Volkswagen JettaThe Inno Dual Angle Ski and Snowboard Carrier INUK729 (discontinued) is a great ski/snowboard carrier but it only fits with certain vehicles which unfortunately does not include your 2012 Volkswagen Jetta. The good news is that we still have options for you though! For your application I recommend installing the Inno Aero roof rack system because it's simple, yet doesn't lack any features and is more cost-effective than most of the other roof rack systems that fit your vehicle. Here are...
view full answer... - Single Bar Inno Roof Rack that Fits 2021 Toyota TacomaFor a single bar Inno roof rack for your 2021 Toyota Tacoma you would want the part # INXB138 for the bar but the rest of the components are all sold for a two bar setup. So you'd also need the part # INXS250 for the feet and part # INK729 for the fit kit.
view full answer... - Can Yakima Roof Rack Bars from 2006 Hyundai Elantra Be Used on 2013 Kia RioThe Yakima roof rack you referenced is not longer available and not compatible as the Q clips have been discontinued by the manufacturer. If your new 2013 Kia Rio is a 5-door hatchback with no existing rails or crossbars, then I recommend the Inno rack # INXB130-138, # INXS250, and # INK608. Often our customers that use a roof rack will opt for a handy accessory, Tire Step # HE4040, to ease access to the rooftop cargo. This fully-assembled step slips over a tire for use and folds up for...
view full answer... - Recommended Inno Roof Rack For 2013 Honda Civic Coupe Naked RoofThe custom fit kit part # INK642 that you referenced is the correct fit kit for the 2013 Honda Civic Coupe. To complete the roof rack system you will need Inno Aero Crossbars part # INXB130-138 and Inno Through feet part # INXS250. The Inno crossbars are aerodynamic to cut down on wind noise and have integrated T-slots to make mounting accessories easier. The through feet are designed so the bar sits on top of the feet and allows for bar overhang, which comes in handy if you have a water...
view full answer...
- Aero Bar Roof Rack Recommendation for 2011 Lincoln MKZFor an aero bar roof rack that is available for your 2011 Lincoln MKZ that rivals the quality of Yakima racks and is priced better I would highly recommend the Inno Aero Bar roof rack part numbers # INXB123-130, # INXS250, and # INK546. This would be your best option for a rack that's ready to go!
view full answer... - What Size Crossbars do I Need for My 2016 Honda Civic?From the sounds of your question, you are looking for what roof rack crossbar length fits your 2016 Honda Civic. If that is your question, it truly depends on what roof rack manufacturer constructed the bars. This is because each manufacturer conducts different tests to make sure they produce the correct length for your vehicle. With that being said, one of the roof rack systems you looked at was the SportRack Semi-Custom Roof Rack # SR1010. While we do have great roof racks that fit...
view full answer... - Inno Roof Rack Fit for 2020 Toyota Tacoma Double Cab With Naked RoofThere is an Inno roof rack that fits a 2020 Toyota Tacoma Double Cab with a naked roof, though the part you mentioned is just a foot pack, and it doesn't work with the Inno rack systems that fit your Tacoma Double Cab. Instead, the Inno rack that fits is made up of the following parts: - Inno Aero Crossbars # INXB145-2 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit # INK729 These are 59 inch crossbars which are going to give you the maximum amount of space to carry...
view full answer... - Recommended Roof Rack For Carrying Cargo On 2012 Honda Accord SedanI recommend going with the largest crossbar available so that you have as much room as possible for your cargo. A nice large setup that fits your 2012 Honda Accord Sedan is the Inno Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 # INXB138-2. You'll also need the appropriate Feet # INXS250 and Fit Kit # INK745.
view full answer... - Best Roof Rack Option For 2020 Nissan Rogue With Naked RoofThe best roof rack option for the 2020 Nissan Rogue with a naked roof is Inno Aero Cross bars # INXB138-2 with Inno feet part # INXS250 and custom fit kit part # INK466. The Inno bars are low profile aerodynamic bars that are designed to cut down on the wind noise that you may experience with other brands available. The built in t-slot makes it easier to mount accessories like bike racks and water sport carriers. Other brands do require cutting the rubber strip in the t-slot to make room...
view full answer... - Is There a Roof Rack For a 2012 Chevy Colorado Crew CabHi Samba; I'm not sure what video you watched but there is indeed a roof rack that fits your 2012 Chevy Colorado Crew Cab, from Inno. The rack is made up of the following: - Inno Aero Crossbars # INXB130-138 - Inno Through Feet for Aero Crossbars # INXS250 - Custom Fit Kit # INK153
view full answer... - Roof Rack Recommendations for a 2004 Volkswagen Passat Sedan with Naked RoofThule used to have a roof rack to fit the bare roof on your 2004 Volkswagen Passat, but that has been discontinued so we need to go with a different solution for you, and for that I recommend the Inno Aero roof rack which consists of the following parts: - 51" Aero Crossbars # INXB130-2 - Through Feet # INXS250 - Fit Kit # INK533 I really like this roof rack system because it has the quality of a high-end roof rack but doesn't reflect the higher cost associated with the high-end options.
view full answer... - Inno Roof Racks for 2007 Saturn Ion with Bare Roof to Allow Use of J-Style Kayak CarrierRoof rack options for your 2007 Saturn Ion include a few rack styles from Inno, all shown on the linked page. For use with a J-style kayak carrier I suggest the Aero bar rack made of parts # INXB130-2, # INXS250 and # INK214. This rack has 51-inch bars that will be quieter than most other bar shapes. It is always a good idea to check the vehicle owner's manual to confirm the roof can safely handle the weight of what you want to load on it.
view full answer... - Recommended Roof Rack For 2016 Honda CR-V With Naked Roof For Carrying KayaksWe can get your 2016 Honda CR-V with a naked roof set up with a roof rack to carry a couple kayaks, and the option I really like is from Inno. The reason I recommend the Inno is because it uses long 54 inch crossbars, which not only gives you enough space for mounting two kayaks, it also makes mounting them easier, particularly on J-carriers like the etrailer J-Style Kayak Carrier # e98878. The closer you can get the kayak carriers to the edge of your CR-V, the simpler it will be to put...
view full answer... - Recommended Roof Rack With Highest Weight Capacity For 2015 Toyota Prius The Inno aero roof rack that you are referring to includes InnoAero Crossbars - Aluminum - Black - 51" Long and 54" Long # INXB130-138, Inno Through Feet # INXS250, and Custom Fit Kit # INK865. This system is indeed locking; it secures the roof rack to your vehicle's roof and also secures any track-mounted accessories to the crossbars. The track-mounted accessories simply slide into the integrated T-slot track on top of the crossbars. The weight capacity for this system is 140lbs, but...
view full answer... - Roof Rack for a 2016 Fiat 500X With a Naked RoofThe fit guide is asking about the flush plastic rails that are raised up on the vehicle. If you have flat, plastic trim without any raised area to it, then you don't have flush rails. Since it sounds like you don't have flush rails, I recommend Inno's Aero kit, consisting of: Inno Aero Crossbar Kit, part # INXB123-130 Inno Through Feet, part # INXS250 Inno Custom Fit Kit, part # INK482 I've linked the rest of the kits, but this kit in particular will have distance between it and the...
view full answer... - Roof Rack for a 2004 Volkswagen Passat Sedan with Bare RoofTo get a roof rack confirmed to fit your 2004 Volkswagen Passat Sedan we need to look for a different brand as SportRack doesn't have a roof rack to fit. I recommend going with the Inno Aero roof rack system because it's cost-effective yet durable and has great quality. Here are the parts you need: - 51" Aero Crossbars # INXB130-2 - Through Feet # INXS250 - Fit Kit # INK533
view full answer... - Recommended Fairing for Inno Roof Rack on 2013 Honda Civic SedanFor a 2013 Honda Civic Sedan, Inno recommends a 48 inch fairing, part # INA262. The fairing fits crossbars measuring up to 1-1/8 inches tall by 3-1/2 inches wide If you don't have an Inno roof roof rack yet, I'd recommend the through-bar style for maximum space to mount accessories. You can assemble the rack using these parts: Aero Crossbars, part # INXB130-138 Through feet, part # INXS250 Vehicle Specific Fit Kit, part # INK722
view full answer... - Roof Rack Recommendation for a 2011 Kia Optima with Sunroof and a Yakima FrontLoader Bike RackDoes your 2011 Kia Optima already have a roof rack? If it does then the center to center distance from one crossbar to the other will need to be 16 to 48 inches and the Yakima FrontLoader # Y02103 will fit. If you do not have a roof rack then you will first need to add one. Inno roof rack # INXB130-138, # INXS250, and # INK607 is a great option that will fit your Optima and the bike rack. Please note that with this or any bike rack it is not recommended to open the sunroof because the...
view full answer... - Recommended Roof Rack For A 2012 Honda Crosstour When installing a roof rack on your 2012 Honda Crosstour I recommend the following parts to make the complete rail kit: Inno Aero Crossbars - Aluminum - Black # INXB123-130 Inno Through Feet for Aero Crossbars # INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK587 The three items mentioned above will give you a complete roof rack system for your 2012 Honda Crosstour. The rack has a weight capacity up to 165 pounds. The bars have a glass-blasted powder coat...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Ashley K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.