See what our Experts say about this Rhino Rack Roof Rack

• Roof Rack For 2020 Chevy Equinox With Naked Roof
  We do have a roof rack system that will fit your 2020 Chevy Equinox beautifully, even without it having any rails or other mounting spots. Your Equinox has what is referred to as a naked roof, and there is one option I really like for your Equinox, which is from Rhino-Rack. The parts that make up the rack and fit your car are the following: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # DK488 The reason I like the Rhino-Rack...
  view full answer...
• Best Roof Rack For 2020 Ford Edge With Glass Vista Roof and Flush Mount Rails
  For the 2020 Ford Edge With Glass Vista Roof and Flush Mount Rails I recommend the Rhino Rack roof rack part # RRVA126B-2, and # RRSX024. The aerodynamic shape of the crossbars along with the Vortex strips in the C-channels significantly cut down on wind noise. The roof rack is compatible with the glass vista roof on the Edge but I do not recommend opening the sunroof while carrying cargo on the roof rack to avoid damage. Even when you are not carrying cargo and open the sun roof with...
  view full answer...
  
• Trunk Mounted Bike Rack Compatible with 2016 Volvo XC90 Spoiler
  On your 2016 Volvo XC90 if you have a roof rack you can use the Hollywood Racks Over-The-Top Trunk Bike Rack # HRF2 or # HRF2-3. I confirmed this with the manufacturer. We don't list the fit in our guide because it requires the rails for a fit. If you don't have a roof side rails then you will need to add a roof rack to your flush mounted rails to use that rack. The # RRVA126B-2 and # RRSX040 are my recommendation. If you have the raised factory side rails then you don't need to add...
  view full answer...
  
• Troubleshooting Plastic Endcaps That Won't Stay In Place On Rhino-Rack Vortex Crossbars
  Regarding the endcaps popping out on your Rhino-Rack Vortex Aero Crossbars - 49" # RRVA126B-2, this is not a common occurrence and I have not heard of this happening before. Make sure the rubber strip, or anything else for that matter, is not getting caught between the crossbar and endcap. Then make sure you are fully pushing the plastic endcaps into place and locking them all the way with the included key. If you are still having issues then let me know and we can dig deeper into the issues...
  view full answer...
• What are the Differences Between Roof Bag on Naked Roof and Roof Rack Mounted Bag?
  Apart from how the rooftop bags mount there is little difference between the cargo bags that go on the naked roof of your 2013 Kia Soul or one that attaches to a roof rack. To avoid having to put a pricey roof rack on your Soul, I strongly recommend going with a bag that mounts to your naked roof such as the Rightline Gear Sport 2 Rooftop Cargo Bag # RL100S20. This bag is waterproof, has 15 cubic feet of storage and is 44" long x 36" wide x 19" tall. You can mount the Rightline by running...
  view full answer...
• Roof Rack Options for 2016 Porsche Cayenne with Naked Roof
  For your 2016 Porsche Cayenne with a naked roof we have the flush bar Rhino Rack part # RR86MR which is also an aero bar rack but the bar does not extend past the feet of the rack.
  view full answer...
• Roof Rack Fit for 2013 Volkswagen Touareg With Roof Rails and Sun Roof
  There is definitely a solution for you, though it could be that you have a sun roof and not a moon roof. This matters in terms of fit, because a moon roof slides into a cavity in the roof and does not extend above it, while a sun roof generally does extend above it. Due to this, the rack you mentioned, Rhino Rack # RRVA126B-2 and # RRSX022, would not work for your 2013 Volkswagen Touareg because the rack should not be used with vehicles that have a sun roof. Additionally, each of the Yakima...
  view full answer...
  
• Is There a Roof Rack For 2019 Toyota RAV4 With Flush Side Rails
  Hi Ben, Since your 2019 Toyota RAV4 doesn't have the raised side rails, it should have flush-mounted rails, and I have added a photo below that a customer was nice enough to send in which shows a flush side rail and what your RAV4 should have. If it does, there is indeed a roof rack you can use, from Rhino-Rack, that consists of the following parts: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - RCH Legs # RRRCH4 - Custom RCP Fit Kit # RR42SV Not only does this fit your RAV4 with...
  view full answer...
• Recommended Roof Rack For A 2018 Chevy Equinox Hauling A Kayak And Bike
  Hey William, If your 2018 Chevy Equinox has rails that run from front to back then I recommend the Yakima JetStream Crossbars # Y00425 and TimberLine Towers # Y33TR. If you have a naked roof then you'll need the following roof rack components: Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK488 To haul the kayak you can can clamp on a carrier like the Rhino-Rack...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2016 Mercedes GL 450
  You are on the right track. You will need a set of crossbars mounted to the raised side rails of your 2016 Mercedes Benz GL 450 to carry a cargo box. For that the Rhino Rack roof rack part numbers # RRVA126B-2 and # RRSX100 is what I recommend. This rack gives you crossbars that are aero shaped to minimize wind noise and is very easy to install so I recommend it highly. I attached an install video for the rack on a similar SUV for you to check out too. With this rack installed you'd be...
  view full answer...
• Roof Rack and Kayak Carrier for 2018 Mitsubishi Outlander Sport
  I will be happy to walk you through what you will need to add a roof rack and kayak carrier to 2018 Mitsubishi Outlander Sport in the budget you mentioned. You said there are places to install a rack system, but I am unsure if that meant your '18 Outlander Sport had a naked roof (meaning no rails of any kind on the roof already) or a roof with factory flush-mounted rails that run front to back so I'll give you options for both. Rhino Rack is a high-quality roof rack manufacturer and they...
  view full answer...
  
• Best Way To Carry Cargo on a 2016 Honda Odyssey
  I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
  view full answer...
• Which Rhino Rack Roof Rack Fits a 2012 Nissan Rogue with a Naked Roof
  Yes. The Rhino Rack Roof Rack for 2012 Nissan Rogue that uses the parts # RRVA126B-2, # RRRLKVA and # DK146 is compatible with your 2012 Nissan Rogue with a naked roof. As long as your kayak carrier can attach to aero/elliptical shaped bars, which most can, you'll be able to carry two 40-lbs kayaks without any issues. I've linked a review and installation video of this kit you can check out as well if you need any tips when it comes time to install the rack.
  view full answer...
• Rhino-Rack Vortex Aero Roof Rack For A 2014 Toyota Sienna
  Hey John, I used to have a 2013 Sienna, it was a great van. I can definitely help set you up with Rhino Rack Vortex Aero Crossbars for your 2014 Sienna. The Rhino-Rack # RRVA126B-2 that you mentioned is a set of crossbars only though, so additional parts will be needed. The complete roof rack for the 2014 Sienna is as follows: - Rhino-Rack Vortex StealthBar Roof Rack - Raised, Factory Side Rails - Aluminum - Black # JA7987 This does come with slightly shorter crossbars than what you were...
  view full answer...
• Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon Roof
  Foam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
  view full answer...
• Roof Rack Recommendation for 2016 Jeep Grand Cherokee Altitude with Metal Flush Roof Rails
  For your 2016 Jeep Grand Cherokee that has the E Group style roof flush rails we have the Rhino Rack Aero Bar roof rack part numbers # RRVA126B-2, # RRRCH4, and # RRRCP27-BK that will work well.
  view full answer...
• Recommended Roof Rack Compatible With Thule Hullavator Pro Kayak Carrier on 2018 Honda HR-V
  For your 2018 Honda HR-V to be compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898, you have to use slightly longer crossbars. The Hullavator requires 4-8 inches overhang to give clearance. In order to give you the clearance without giving you too much bar length, I recommend the following system: Rhino-Rack Vortex Aero Crossbars - 49" Long - Qty 2 # RRVA126B-2 Rhino-Rack 2500 Series Legs # RRRLKVA Custom DK Fit Kit # DK454 Metal lock cores...
  view full answer...
  
• Is Rhino-Rack Roof Rack for 2018 Subaru Forester Secure to Use With Yakima SkyRise Tent
  The Rhino-Rack Locking Endcaps for Vortex Aero Crossbars - Metal Cores # RRVA-LEC4 are going to be what you need if you use any accessories that go into the channels of your roof rack crossbars; if you only use accessories that clamp around the bars then the metal cores would not be needed. In regards to the Rhino-Rack roof rack for your 2018 Subaru Forester, you mentioned you have the 59" Rhino-Rack Vortex Crossbars # RRVA150B-2, though that length may not work for your vehicle. The...
  view full answer...
  
• Roof Rack and Kayak Load Assist Recommendation for 2011 Chevy Equinox with Raised Side Rails
  There is a solution for you, but the issue with the BoatLoader EVO the crossbar spread as well as its 80 lb weight capacity, which is less than your 87 lb fishing kayak. Instead, for your 2011 Chevy Equinox with raised side rails I recommend the Rhino-Rack Roof Rack, which will give your Equinox a very functional, durable rack that will allow you to use a load assist. This roof rack uses aero bars and consists of: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack SX Series...
  view full answer...
  
• Lowest Profile Roof Rack For 2020 Jeep Grand Cherokee w/ Flush Mount Rails For Rooftop Tent
  The lowest profile roof rack that fits your 2020 Jeep Grand Cherokee with flush mounted rails (note: the rails should have a metal strip on top and not just be black plastic) and is compatible with a rooftop tent is from Rhino-Rack, and consists of the following parts: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - RCL Legs # RRRCL4 - Custom RCP Fit Kit # RRRCP27-BK This rack is very low profile because it measures just under 4 inches from your Jeep's roof to the top of the crossbar....
  view full answer...
• Can Rhino-Rack Vortex Aero Crossbars Carry a Roofnest Sparrow Adventure XL Tent
  The Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long # RRVA126B-2 have a capacity of 165-lbs, which is the highest available for your 2021 Toyota RAV4, so you will be limited to that weight when loading items on the roof rack. Since your Sparrow Adventure XL tent weighs 150-lbs alone, you'll eat up most of the capacity with that. You will always be limited to the lowest rated component in your setup and in this case it appears that the roof of the RAV4 is only rated for...
  view full answer...
• Recommended Cost-Effective Roof Rack for a 2009 Chevrolet Malibu and a 2012 Nissan Maxima
  The SportRack # SR1002 is a Semi-Custom roof rack. It will fit your 2009 Chevrolet Malibu and will work if you are looking for the most cost-effective option out there. If you plan on using the roof rack frequently though I highly recommend going with a custom roof rack for your Malibu. A custom rack is one that uses a fit kit specially designed and tested to fit your roof properly. The most cost-effective option we have in this category is the Inno rack which consists of the Square Crossbars...
  view full answer...
• Sliding Ladder Rack that Fits 2017 Chevy Colorado 5 foot Bed
  For your 2017 Chevy Colorado 5 foot bed we have the TruXedo Elevate Truck Bed Sliding Ladder Rack part # TX86NV as a confirmed fit that would work great. It's also adjustable in height and compatible with tonneau covers like the Extang Xceed # EX85350.
  view full answer...
• Which Roof Basket Will Fit Onto The Flush Rails On My 2015 Buick Encore?
  I am not sure which aftermarket rails you might be referring to. If you have flush rails running front to back and no crossbars then you will first need to install crossbars such as Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 along with Legs # RRSX040. Then you can add a roof basket like Thule Canyon XT Roof Cargo Basket - Steel - 49" x 40" x 6" - 150 lbs # TH859XT. The Curt Roof Mounted Cargo Basket - 41-1/2" Long x 37" Wide x 4" Deep # C18115 you were looking at is not able to fit...
  view full answer...
  
• How to Install the Rhino-Rack Pioneer Platform Rack on a Truck Cap
  I do have an option for you but there would be no way to attach a Rhino-Rack Pioneer Platform Rack like part # RR52TB to the roof rack you have on your truck cap. The crossbars are not in the correct location spread wise and the internal channels are different. The only way to attach this Pioneer rack to your truck cap would be to remove the crossbars you have now and install a Rhino-Rack Track System which is composed of part # RTC14, part # RLTF (2), and part # RB1375S (2). You would...
  view full answer...
• Can You Install Bed Rail Mounted Crossbars With A Tonneau Cover On A 2015 Chevrolet Silverado
  I have the perfect option that will allow you to install a set of crossbars on the bed rails of your 2015 Chevrolet Silverado with tonneau cover installed. As you have a tonneau cover on your truck that attaches to the inside of the bed rails like the BAKFlip G2 Hard Tonneau Cover part # BAK26121, the Yakima BedRock Truck Bed Cargo Rack part Y01140-78 will not work. Instead, you will want to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style...
  view full answer...
• Adding An Awning To A 1995 Toyota Granvia
  Hello Devin, we do have a few options for you. The first thing that comes to mind is to just do a direct mount awning. The Thule HideAway Awning # TH490018 is a great direct mount option. You just need to have 8.5" of open space on the side of the van. If you prefer a roof mounted option, the best bet would be to install roof tracks like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14. You can then use the Track Mount RLTF Legs # RLTF along with some Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• Will Rhino Rack Foot Kit part # RLTF Fit the Channels on the Top of 2008 Fleetwood Bayside
  Can you measure the width of channel on the roof of your 2008 Fleetwood Bayside? Nearly all of them are made to the same specs and have a 3/4 inch wide channel at the widest point which is what the # RLTF is designed to fit. Basically the square nut that would ride in the channel is 3/4 inches wide and if the channel on your roof matches that this will work just fine.
  view full answer...
  
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Rhino Rack RT-Style Roof Rack Track Installation for 2014 Mercedes-Benz Sprinter Cargo Van
  I spoke with Tony, my contact at Rhino Rack, and he assured me that you will only install the Rhino-Rack RT-Style Roof Track, # RB1800B-2, # RLTF, # RRRTS546, from the outside of your 2012 Mercedes-Benz Sprinter. There is no need to remove your headliner or any of the lights/accessories on the interior. To install the rails, you will need to remove the plugs on your Sprinter's roof with a flat head screwdriver in order to secure the track with the T-bolts provided. You will also need...
  view full answer...
  
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Quick Mount Nuts for Rhino Roof Rack Tracks
  According to Rhino-Rack, their M8 x 16.5 # RR72XB T-bolts are meant to fit in the top channel of their crossbars. For the tracks, you'd want to use # RRQMFK11 which are compatible with the Rhino-Rack roof tracks. The Rhino Rack # RLTF leg kit would include the necessary hardware to attach the leg to the tracks. If you could reply and tell me how long of a crossbar you needed, I'd be happy to make a recommendation.
  view full answer...
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Aero Crossbars and Roof Rack Parts Needed to Mount a Roof Rack on a Truck Topper or Bed Sides
  I do have a way that you can install aero bars on a truck bed topper or to the side rails of a truck bed but the Whispbar crossbars cannot be mounted this way. Tracks can technically be mounted to just about anything that you are willing to drill into including the bed sides. You could use Rhino-Rack tracks such as # RTC14 which are 55 inches long with legs # RLTF (sold in pairs), and aero crossbars. The crossbars come in various lengths and I have included a link to them for you. The...
  view full answer...
• Are There Rails Available For Installing a Roof Rack on a Vehicle
  We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
  view full answer...
• Can Awning Mount Directly to Rhino-Rack RTC-Style Roof Rack Tracks
  I do have a solution for you, however awnings like the Rhino-Rack Batwing # RR33100 cannot mount directly to the RTC-Style Roof Rack Tracks # RRRTC8JWMY11. The issue is the awning will require a certain amount of vehicle overhang from its attachment point like what roof rack crossbars (as long as they aren't flush with the mounting feet) would provide. This allows for clearance between the awning and vehicle when in use. I also don't recommend attaching an awning to the tracks using...
  view full answer...
• Hobie Outback Kayak Roof Top Carrier for a 2018 Ford F-250 Crew Cab With Short Bed Camper Shell
  With the weight of your Hobie Outback Kayaks being between 85 and 103lbs from the factory you will want to use the a Rhino-Rack setup. It is rated for 209lbs versus the 165 that the Yakima is capable of holding. For your 2018 Ford F-250 you will need 2 sets of the Rhino-Rack RTC-Style Roof Rack Tracks # RTC16. One set for the cab of your F-250 and one set for your Leer camper shell. Next you will want Track Mount RLTF Legs # RLTF. You will need one set for each Rhino-Rack Heavy-Duty...
  view full answer...
• Recommended Ladder Rack and Tonneau Cover Combo for 2020 Jeep Gladiator
  I have a solution for you, but the Track Mount RLTF Legs # RLTF you mentioned are not a fit in Truck Hero rails; additionally those rails are not designed to fit on your 2020 Jeep Gladiator. When it comes to compatible tonneau covers and ladder racks/cargo racks that will work on your 2020 Jeep Gladiator we've only found one combination that will work together. You will need a tonneau cover that mounts completely inside of the bed rails and does not stick up, and a ladder/cargo rack that...
  view full answer...
  
• Do I Have the Correct Parts for a Truck Bed Crossbar System on My 2020 Ford F-150 Raptor?
  The - Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14, Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 2 # RLTF, and Rhino-Rack Heavy-Duty Roof Rack Crossbar - Black - 71" Long - Qty 1 # RB1800B (x2) are technically compatible parts. However, the Roof Rack Tracks are only designed for you to install with drilling, which will damage your truck rails. Also, it is doubtful whether you will be able to attach a nut on the...
  view full answer...
• What Are Rhino-Rack RLTF Legs Made Of
  They are plastic, and according to Rhino-Rack, the Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall # RLTF are made of glass-reinforced nylon. So it is not injection-molded, but glass-reinforced nylon is designed to be extremely stable and durable.
  view full answer...
• Rack To Support Rooftop Tent Over A Truck Tonneau Cover
  A great option for you is to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style Roof Rack Tracks part # RRRTV168 for 5-1/2" beds and part # RRRTV208 for 6-1/2" beds. If you have a factory plastic bed liner, you will need to cut out the mounting location where the rivets attach. You will also need a set of mounting feet and matching crossbars. This rack also requires drilling into your Tacoma. I recommend using Track Mount RLTF Legs for...
  view full answer...
• Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau Cover
  As long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
  view full answer...
• Roof Rack Recommendation for a 2004 Fleetwood Bayside Pop Up
  The SportRack Pop-Up Camper Roof Rack # SR1020 that you referenced will require drilling into the roof of your vehicle to install. The brackets are designed to sit on the edge of the roof of the camper and get bolted there. Without knowing what tracks you have on your roof or how far apart they are it would be hard to know if there is a roof rack foot that would fit them. If the tracks were like the part # RTS508 that are 1-1/2" wide x 1/2" tall you would be able to use the foot pack #...
  view full answer...
• Weight Capacity Of The Rhino Rack RLTF Roof Rack System.
  If you used these # RLTF feet with the tracks # RRRTV188 and use the Heavy Duty Crossbars # RB1250 you will have 220 lbs of capacity on your roof. This is a bit more than the average roof rack system so you will be able to really fill up your bar space! You should verify that the vehicle's roof can handl that weight too though.
  view full answer...
• How to Use Roof Top Tent on Truck Bed with Tonneau Cover Installed
  If the tonneau cover on your Toyota Tacoma installs completely inside the bed rails then you can install crossbar tracks like the Rhino Rack # RRRTV168 that you mentioned for a 5-1/2 foot bed or part # RRRTV208 for a 6-1/2 foot bed. Just note that you will need to cut into a factory plastic bed liner if present where the rivets for the tracks need to attach. Then with the tracks installed you can add the Rhino Rack RLTF Legs # RLTF and the Heavy-Duty Crossbars # RB1800B. Whether or not...
  view full answer...
• Rivet Holes on a Rhino-Rack RT-Style Roof Rack Tracks for a 2016 Mercedes-Benz Sprinter 2500
  The Rhino Rack RT Style Tracks, part # RRRTS546 are pre-lined to the existing holes in the roof of the 2016 Mercedes-Benz Sprinter 2500. However, you will need to drill two holes on the rear of each track to install the included rivets. The complete kit for this is: Rhino Rack Heavy-Duty Roof Rack Crossbars, 71 inches long, Silver, part # RB1800 or Black, part # RB1800B-2 2x Rhino Rack RLTF Legs for Rhino Rack RTC and RT Style Tracks, part # RLTF Rhno Rack RT-Style Roof Rack Tracks,...
  view full answer...
• How to Install the Rhino-Rack Pioneer Platform Rack on a Truck Cap
  I do have an option for you but there would be no way to attach a Rhino-Rack Pioneer Platform Rack like part # RR52TB to the roof rack you have on your truck cap. The crossbars are not in the correct location spread wise and the internal channels are different. The only way to attach this Pioneer rack to your truck cap would be to remove the crossbars you have now and install a Rhino-Rack Track System which is composed of part # RTC14, part # RLTF (2), and part # RB1375S (2). You would...
  view full answer...
• Can You Install Bed Rail Mounted Crossbars With A Tonneau Cover On A 2015 Chevrolet Silverado
  I have the perfect option that will allow you to install a set of crossbars on the bed rails of your 2015 Chevrolet Silverado with tonneau cover installed. As you have a tonneau cover on your truck that attaches to the inside of the bed rails like the BAKFlip G2 Hard Tonneau Cover part # BAK26121, the Yakima BedRock Truck Bed Cargo Rack part Y01140-78 will not work. Instead, you will want to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style...
  view full answer...
• Adding An Awning To A 1995 Toyota Granvia
  Hello Devin, we do have a few options for you. The first thing that comes to mind is to just do a direct mount awning. The Thule HideAway Awning # TH490018 is a great direct mount option. You just need to have 8.5" of open space on the side of the van. If you prefer a roof mounted option, the best bet would be to install roof tracks like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14. You can then use the Track Mount RLTF Legs # RLTF along with some Rhino-Rack Vortex Aero Crossbars...
  view full answer...
• Will Rhino Rack Foot Kit part # RLTF Fit the Channels on the Top of 2008 Fleetwood Bayside
  Can you measure the width of channel on the roof of your 2008 Fleetwood Bayside? Nearly all of them are made to the same specs and have a 3/4 inch wide channel at the widest point which is what the # RLTF is designed to fit. Basically the square nut that would ride in the channel is 3/4 inches wide and if the channel on your roof matches that this will work just fine.
  view full answer...
  
• Can the Rhino-Rack RTC-Style Roof Rack Tracks Part # RTC16 be Installed at an Angle
  The Rhino-Rack RTC-Style Roof Rack Tracks part # RTC16 will need to be installed on a flat surface. If the tracks are not installed on a flat level surface then the tracks will rock and pivot back and forth creating a weak point in the water seals. If the tracks pivot then the crossbars will not attach to the mounting feet. You will want to use the Track Mount Legs for Rhino-Rack part # RLTP, part # RLTF, or part # RLT500 for this track system in addition to a crossbar that is compatible...
  view full answer...
• Rhino Rack RT-Style Roof Rack Track Installation for 2014 Mercedes-Benz Sprinter Cargo Van
  I spoke with Tony, my contact at Rhino Rack, and he assured me that you will only install the Rhino-Rack RT-Style Roof Track, # RB1800B-2, # RLTF, # RRRTS546, from the outside of your 2012 Mercedes-Benz Sprinter. There is no need to remove your headliner or any of the lights/accessories on the interior. To install the rails, you will need to remove the plugs on your Sprinter's roof with a flat head screwdriver in order to secure the track with the T-bolts provided. You will also need...
  view full answer...
  
• Can Rhino-Rack Vortex Aero Crossbars Be Cut to Size
  It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up your rack in the dimensions you prefer. Since you want to end up with bars that are about 44-inches long I suggest part # RRVA118S-2. This is a set of silver Vortex Aero bars that come in that 44-inch size. With these you can use the 63-inch tracks...
  view full answer...
• Can I Cut The Rhino Rack RTC Track Down To The Size I Need and Available Lengths Of Track
  Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part # RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a replacement part. The tracks are available in different lengths as well. Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long # RRRTC8JWMY11 Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/2" Long # RTC8JW Rhino-Rack RTC-Style Roof Rack Tracks - 37-1/2"...
  view full answer...
• Can Rhino-Rack RTC Roof Rack Tracks be Cut to a Certain Length
  You could trim the Rhino-Rack roof rack tracks # RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set is # RTC8JW at 31-1/2 inches long. If you need a specific size I can check to see if we have an exact match. The tracks are compatible with Rhino-Rack RLTP legs # RLTP, RLCP legs, # RLT500, and RLTF legs, # RLTF.
  view full answer...
• Quick Mount Nuts for Rhino Roof Rack Tracks
  According to Rhino-Rack, their M8 x 16.5 # RR72XB T-bolts are meant to fit in the top channel of their crossbars. For the tracks, you'd want to use # RRQMFK11 which are compatible with the Rhino-Rack roof tracks. The Rhino Rack # RLTF leg kit would include the necessary hardware to attach the leg to the tracks. If you could reply and tell me how long of a crossbar you needed, I'd be happy to make a recommendation.
  view full answer...
• Attaching Rhino-Rack RTC-Style Roof Rack Tracks To Bed Rail Of 2019 Tacoma With A 5 Foot Bed
  The Rhino-Rack RTC-Style Roof Rack Tracks # RTC16 are meant to be mounted on the roof of a camper shell, but I see no reason why you couldn't mount them to the bed rails of your 2019 Toyota Tacoma. The only problem I see is that you have a 5 ft bed and the rails are 63 inches long. You will have to trim these tracks to match the length of your bed. In regards of the installation. It will come with all the hardware you need to install correctly. The only other part of the system that you...
  view full answer...
• Aero Crossbars and Roof Rack Parts Needed to Mount a Roof Rack on a Truck Topper or Bed Sides
  I do have a way that you can install aero bars on a truck bed topper or to the side rails of a truck bed but the Whispbar crossbars cannot be mounted this way. Tracks can technically be mounted to just about anything that you are willing to drill into including the bed sides. You could use Rhino-Rack tracks such as # RTC14 which are 55 inches long with legs # RLTF (sold in pairs), and aero crossbars. The crossbars come in various lengths and I have included a link to them for you. The...
  view full answer...
• Are There Rails Available For Installing a Roof Rack on a Vehicle
  We do have rails like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 which mount to naked roof vehicles. They are typically used for camper shells or truck bed rails, but can be used on a vehicle if you are willing to drill into the roof. These rails will allow you to use Track Mount RLTF Legs # RLTF and Rhino-Rack Heavy-Duty square and Aero oval crossbars like the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1375B-2 or the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. There are...
  view full answer...
• Can Awning Mount Directly to Rhino-Rack RTC-Style Roof Rack Tracks
  I do have a solution for you, however awnings like the Rhino-Rack Batwing # RR33100 cannot mount directly to the RTC-Style Roof Rack Tracks # RRRTC8JWMY11. The issue is the awning will require a certain amount of vehicle overhang from its attachment point like what roof rack crossbars (as long as they aren't flush with the mounting feet) would provide. This allows for clearance between the awning and vehicle when in use. I also don't recommend attaching an awning to the tracks using...
  view full answer...
• Hobie Outback Kayak Roof Top Carrier for a 2018 Ford F-250 Crew Cab With Short Bed Camper Shell
  With the weight of your Hobie Outback Kayaks being between 85 and 103lbs from the factory you will want to use the a Rhino-Rack setup. It is rated for 209lbs versus the 165 that the Yakima is capable of holding. For your 2018 Ford F-250 you will need 2 sets of the Rhino-Rack RTC-Style Roof Rack Tracks # RTC16. One set for the cab of your F-250 and one set for your Leer camper shell. Next you will want Track Mount RLTF Legs # RLTF. You will need one set for each Rhino-Rack Heavy-Duty...
  view full answer...
• Recommended Ladder Rack and Tonneau Cover Combo for 2020 Jeep Gladiator
  I have a solution for you, but the Track Mount RLTF Legs # RLTF you mentioned are not a fit in Truck Hero rails; additionally those rails are not designed to fit on your 2020 Jeep Gladiator. When it comes to compatible tonneau covers and ladder racks/cargo racks that will work on your 2020 Jeep Gladiator we've only found one combination that will work together. You will need a tonneau cover that mounts completely inside of the bed rails and does not stick up, and a ladder/cargo rack that...
  view full answer...
  
• Do I Have the Correct Parts for a Truck Bed Crossbar System on My 2020 Ford F-150 Raptor?
  The - Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2 # RTC14, Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall - Qty 2 # RLTF, and Rhino-Rack Heavy-Duty Roof Rack Crossbar - Black - 71" Long - Qty 1 # RB1800B (x2) are technically compatible parts. However, the Roof Rack Tracks are only designed for you to install with drilling, which will damage your truck rails. Also, it is doubtful whether you will be able to attach a nut on the...
  view full answer...
• What Are Rhino-Rack RLTF Legs Made Of
  They are plastic, and according to Rhino-Rack, the Track Mount RLTF Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 3" Tall # RLTF are made of glass-reinforced nylon. So it is not injection-molded, but glass-reinforced nylon is designed to be extremely stable and durable.
  view full answer...
• Rack To Support Rooftop Tent Over A Truck Tonneau Cover
  A great option for you is to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style Roof Rack Tracks part # RRRTV168 for 5-1/2" beds and part # RRRTV208 for 6-1/2" beds. If you have a factory plastic bed liner, you will need to cut out the mounting location where the rivets attach. You will also need a set of mounting feet and matching crossbars. This rack also requires drilling into your Tacoma. I recommend using Track Mount RLTF Legs for...
  view full answer...
• Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau Cover
  As long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
  view full answer...
• Roof Rack Recommendation for a 2004 Fleetwood Bayside Pop Up
  The SportRack Pop-Up Camper Roof Rack # SR1020 that you referenced will require drilling into the roof of your vehicle to install. The brackets are designed to sit on the edge of the roof of the camper and get bolted there. Without knowing what tracks you have on your roof or how far apart they are it would be hard to know if there is a roof rack foot that would fit them. If the tracks were like the part # RTS508 that are 1-1/2" wide x 1/2" tall you would be able to use the foot pack #...
  view full answer...
• Weight Capacity Of The Rhino Rack RLTF Roof Rack System.
  If you used these # RLTF feet with the tracks # RRRTV188 and use the Heavy Duty Crossbars # RB1250 you will have 220 lbs of capacity on your roof. This is a bit more than the average roof rack system so you will be able to really fill up your bar space! You should verify that the vehicle's roof can handl that weight too though.
  view full answer...
• How to Use Roof Top Tent on Truck Bed with Tonneau Cover Installed
  If the tonneau cover on your Toyota Tacoma installs completely inside the bed rails then you can install crossbar tracks like the Rhino Rack # RRRTV168 that you mentioned for a 5-1/2 foot bed or part # RRRTV208 for a 6-1/2 foot bed. Just note that you will need to cut into a factory plastic bed liner if present where the rivets for the tracks need to attach. Then with the tracks installed you can add the Rhino Rack RLTF Legs # RLTF and the Heavy-Duty Crossbars # RB1800B. Whether or not...
  view full answer...
• Rivet Holes on a Rhino-Rack RT-Style Roof Rack Tracks for a 2016 Mercedes-Benz Sprinter 2500
  The Rhino Rack RT Style Tracks, part # RRRTS546 are pre-lined to the existing holes in the roof of the 2016 Mercedes-Benz Sprinter 2500. However, you will need to drill two holes on the rear of each track to install the included rivets. The complete kit for this is: Rhino Rack Heavy-Duty Roof Rack Crossbars, 71 inches long, Silver, part # RB1800 or Black, part # RB1800B-2 2x Rhino Rack RLTF Legs for Rhino Rack RTC and RT Style Tracks, part # RLTF Rhno Rack RT-Style Roof Rack Tracks,...
  view full answer...
• Can You Install Bed Rail Mounted Crossbars With A Tonneau Cover On A 2015 Chevrolet Silverado
  I have the perfect option that will allow you to install a set of crossbars on the bed rails of your 2015 Chevrolet Silverado with tonneau cover installed. As you have a tonneau cover on your truck that attaches to the inside of the bed rails like the BAKFlip G2 Hard Tonneau Cover part # BAK26121, the Yakima BedRock Truck Bed Cargo Rack part Y01140-78 will not work. Instead, you will want to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style...
  view full answer...
• Mounting a Thule Cargo Carrier on 2017 Chevy Colorado
  I wish there was a great solution that would allow you to install a ladder rack with your tonneau cover but the only ladder racks we offer that can fit with your tonneau would have a load bar spread that would be too wide. What about a roof rack for the cargo carrier?
  view full answer...
• Best Way To Carry Cargo on a 2016 Honda Odyssey
  I would love to help but none of the roof bags for a bare roof will work with a sliding rear door. Therefore, the Rightline Gear Sport 3 Rooftop Cargo Bag part # RL100S30 will not fit your 2016 Honda Odyssey unless you first install a roof rack like the Rhino-Rack Vortex Aero Crossbar System which consists of part # RRVA126B-2, part # RRQMVA10, part # RRRTV168, and part # RRRLT600. The next best option which is also more cost effective would be to install a trailer hitch like the etrailer.com...
  view full answer...
• Roof Kayak Carrier Recommendation for a 2014 Honda Odyssey EX-L with Moon Roof
  Foam block carriers such as Malone Deluxe Kayak Carrier - Foam Block Style Item # MPG152 are designed as a temporary, short-distance solution to carry a kayak. On a van that has sliding side doors they wouldn't work because on a naked roof it would require running straps through the interior of the vehicle. You would instead need a roof rack for your van. I can make some recommendations if you can tell me the year, make, and model of the van.
  view full answer...
• Best Roof Rack Option For 2015 Toyota Sienna With Naked Roof
  Hello Chris, thanks for getting in touch. The Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 can absolutely be installed on a 2011-2020 Sienna with the naked roof. I was not actually aware that naked roof was an option for those years of the Sienna, but if yours does have the naked roof, a track system like the # RRRTV168 is the only option for adding a roof rack. just keep in mind you will be drilling into the roof. You can use the track with the Rhino-Rack Quick Mount Legs # RRRLT600,...
  view full answer...
• What Is The Narrowest Roof Track?
  Hi David, I checked the 5 styles of tracks we carry and it looks like the Rhino Rack options will be the most narrow at 1-1/2". In case you were curious about the other style (and brands), I have all my findings listed below. 1-1/2" wide - Rhino-Rack RT-Style Roof Rack Tracks - 66" Long # RRRTV168 1-5/8" wide - Thule Top Tracks for Roof Racks - 60" Long # THTB60 2" wide - Yakima 60" HD Tracks for Roof Racks, OverHaul HD, and OutPost HD # Y74MR 1-5/8" wide - Yakima 60" Tracks for Roof...
  view full answer...
• Rhino-Rack Rivet Mounted Roof Rack for 2020 Winnebago View 24V
  You can use rivet-mounted tracks to install a Rhino-Rack roof rack on your 2020 Winnebago View 24V motorhome, I'd just recommend paying special attention to sealing the roof where the rivets are. What you need first are the tracks, and with such a long roof, you can pick the length that works for you: - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long # RRRTS534 - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 58-1/2" Long # RTS502 - Rhino-Rack RT-Style Roof Rack...
  view full answer...
  
• Roof Rack Recommendation for 2019 Honda Odyssey with Naked Roof
  We have great roof rack options for your 2019 Honda Odyssey that has a naked roof like the Rhino Rack roof rack part numbers # RRVA126B-2, # RRQMVA10, # RRRTV168, # RRRLT600. This rack attaches to the door sills of your vehicle. What I really like about the Rhino Rack roof racks is that they offer the same quality as the more expensive racks but the price is better. It also comes with locks at the lower price instead of requiring additional parts as an add on as well.
  view full answer...
• Potential Roof Rack Option For 2006 Roadtrek 170
  Certainly nothing that is any type of custom fit but you might be able to use something that mounts to tracks such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long # RRRTV168. Then you'd need the right crossbar length to go with Legs # RRRLT600H. I'm not sure what your roof measures so I've added a link below to our selection of tracks and you can filter through them by size.
  view full answer...
• Dimensions and Leg Compatibility of Rhino-Rack RT-Style Roof Rack Tracks RRRTV168
  Rhino-Rack tracks # RRRTV168 are 66-1/8" long x 1-1/2" wide x 1/2" tall. Yes, they are compatible with the RLT600 legs # RRRLT600. They are also compatible with Rhino-Rack RLTP, RLTF, and RLT500 legs.
  view full answer...
• Installation of Rhino-Rack Roof Rack Tracks on 2003 VW Eurovan MV with Rivets
  The Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long - Qty 2 # RRRTV168 are not designed to be mounted in the rain channels, but rather close to them. You still want rain to move away from your doors and not settle in areas you've drilled holes, so the actual gutter is not ideal. However, you do want to be close to the edge because that is the strongest support so close but not in the channel is ideal. A small hand rivet tool is not recommended but a concertina (accordion...
  view full answer...
  
• Best Way to Haul my Kayak with my 2014 Honda Odyssey with a Naked Roof
  I have a solution but with your van as the doors slide they would interfere with the straps running through the track area the doors slide in. Instead it will require a roof rack system to attach the Malone Rack Pads for Crossbars part # MPG314 to allow the kayak to rest on. This rack consist of the parts: # RRVA126B-2, # RRQMVA10, # RRRTV168, and # RRRLT600 Not only will this allow you to attach pads but a ton of different roof top accessories for different hobbies. I also recommend thinking...
  view full answer...
• Roof Rack Recommendation for 2015 Honda Odyssey EX-L
  We have roof racks that will fit your 2015 Honda Odyssey with a naked roof like the Rhino Rack roof rack part numbers # RRVA126B-2, # RRQMVA10, # RRRTV168, and # RRRLT600.
  view full answer...
  
• Does Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 Have to Install with Rivets
  I would recommend you use rivets to install the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 that come with it as they'll be flush enough that accessories will still slide in the tracks. If you find a flush enough bolt to fit you certainly could still go that route.
  view full answer...
• Rack To Support Rooftop Tent Over A Truck Tonneau Cover
  A great option for you is to install a set of crossbar tracks atop the bed rails on your vehicle such as the Rhino-Rack RT-Style Roof Rack Tracks part # RRRTV168 for 5-1/2" beds and part # RRRTV208 for 6-1/2" beds. If you have a factory plastic bed liner, you will need to cut out the mounting location where the rivets attach. You will also need a set of mounting feet and matching crossbars. This rack also requires drilling into your Tacoma. I recommend using Track Mount RLTF Legs for...
  view full answer...
• Solution for Mounting Tent to Bed Rails on 2018 Ram 1500 with Tonneau Cover
  As long as your Access roll-up tonneau cover installs completely inside the bed rails on your 2018 Ram 1500 you can use the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168. Just note that you may need to cut into the bed liner (if present) where the rivets for the tracks will attach. With the tracks installed you can then use the Rhino-Rack RLTF Legs # RLTF and the Heavy-Duty Roof Rack Crossbars # RB1800B-2 that you mentioned to complete the setup. These crossbars have a combined weight...
  view full answer...
• Which Track Mount Legs Should I Use With The RT-Style Roof Rack Tracks On My 2018 Toyota Tundra?
  I've found the correct leg mounts you're looking for! If you're planning on getting the Rhino-Rack RT-Style Roof Rack Tracks # RRRTV168 they will install on your 2018 Toyota Tundra's roof rivets and the Rhino-Rack Quick Mount Legs # RRRLT600 are the legs you need. They will fit the RT Style Roof Tracks and are designed specifically for the Vortex Aero Crossbars # RRVA165S-2. Here is the black version # RRVA165B-2, same thing just different color. If you are wanting the bars to be about...
  view full answer...
  
• How to Use Roof Top Tent on Truck Bed with Tonneau Cover Installed
  If the tonneau cover on your Toyota Tacoma installs completely inside the bed rails then you can install crossbar tracks like the Rhino Rack # RRRTV168 that you mentioned for a 5-1/2 foot bed or part # RRRTV208 for a 6-1/2 foot bed. Just note that you will need to cut into a factory plastic bed liner if present where the rivets for the tracks need to attach. Then with the tracks installed you can add the Rhino Rack RLTF Legs # RLTF and the Heavy-Duty Crossbars # RB1800B. Whether or not...
  view full answer...
• Roof Rack Track System for a 2014 Ford F-150 with Tonneau Cover
  I do have what you need to add a roof rack track system to your bed rails above the tonneau cover but the Rhino-Rack Roof Rack System part # Y02-500B will not work for you because the crossbars are not long enough to span the width of your truck bed and the tracks are not made for a metal bedside. Generally speaking, the maximum width between the tracks will be about 3" shorter than the overall length of the crossbar. The distance from the bottom of the track to the bottom of the crossbar...
  view full answer...
• Can 66 Inch Rhino-Rack RT-Style Roof Rack Tracks be Cut to Fit
  Yes, you can cut to fit the length you need of the 66 inch rivet mount Rhino-Rack tracks, which are the following part number: - Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long # RRRTV168
  view full answer...
• 2016 Honda Odyssey Roof Rack That Doesnt Require Permanent Mount
  We don't have any fit kits for the door jambs of your 2016 Honda Odyssey from any of our manufacturers. You could add a Rhino-roof rack using parts: # RRVA126B-2, # RRQMVA10, # RRRTV168, # RRRLT600. I am sure this is more than you are looking for. Another easy option for you is the SeaSucker Monkey Bars # 298-SX6000B. These are extremely easy to install and are strong enough for highway speeds and rated for 165 lbs. It utilizes vacuum cups rated for 210 lbs pull strength each.
  view full answer...
• Recommended Roof Rack For 2019 Honda Odyssey With Naked Roof
  In order to mount your Thule Cargo Box on the nakef roof of your 2019 Honda Odyssey you will need a crossbar setup. The best crossbar setup for your vehicle is the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. This is a 49" long low-profile crossbar with a weight capacity of 165lbs. With this crossbar you will also need Legs # RRRLT600, Leg Spacers # RRQMVA10, and Roof Tracks # RRRTV168. Drilling is required, but it is still a fairly simple installation process. I have included a detailed...
  view full answer...
• Recommended Roof Rack for a 2020 Honda Odyssey w/ a Naked Roof
  Yes, you can get a roof rack set up to carry some duffle bags on your 2020 Odyssey's roof. You will want the roof rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2 item # RRVA126B-2 Roof Rack Leg Spacer Blocks for Rhino-Rack Vortex Aero Crossbars - 10 mm Thick - Qty 2 item # RRQMVA10 Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long - Qty 2 item # RRRTV168 Rhino-Rack Quick Mount Legs for Vortex...
  view full answer...
• Will Rhino Rack RRRTV168 Roof Rack Tracks Leak?
  The tracks do include pieces of butyl tape that surround each hole to prevent leakage. I'd also put a small bead of silicone under each rivet as it's inserted into the hole to completely ensure there's no water infiltration. If professionally installed and the installer follows the instructions, you shouldn't have any issues. Once installed, the tracks won't require much in the way of maintenance, other than preventing debris from building up in the tracks. I've linked you to the installation...
  view full answer...
• Roof Rack for 2023 Jeep Wrangler Unlimited With Sky One-Touch Top
  For your 2023 Jeep Wrangler Unlimited we have the Rhino-Rack Vortex Aero roof rack. This has the additional clearance needed to still allow you to use your Sky One-Touch top with the crossbars in place. To complete the roof rack you will need the following: -Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 -Rhino-Rack Roof Rack Legs # RL210S2 (Two of these) -RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars # RRVA-FK1-2 I have attached a review video which shows how your automatic...
  view full answer...
• Can I Fit the Rhino-Rack RTC Tracks # RTC16 on My 2022 Kia Telluride with Naked Roof?
  If you are looking for a permanent solution to mount to your 2022 Kia Telluride, the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long # RTC16 is a viable solution. We have had neighbors who report that these tracks do flex to fit the contours of their roofs/camper shells. With that factor, you should be fine with mounting the tracks to your 2-inch channel. Also, since the # RTC16 measures 2 inches wide, they will fit the width. To complete this system, I recommend the following...
  view full answer...
  
• How to Add Rhino-Rack Pioneer Platform to Rhino-Rack Roof Rack on 2022 Jeep Wrangler 4xe
  You can easily add a Rhino-Rack Pioneer Platform to the Rhino-Rack Vortex Aero Crossbars # RRVA150S-2 or # RRVA150B-2 on your Jeep Wrangler 4xe. All you need is the Pioneer that mounts directly to crossbars, which is the following: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars # RR42115BF The # RR42115BF mounts to your Rhino-Rack crossbars with the included clamps, or directly into the channels of your crossbars with the included channel-mounted hardware.
  view full answer...
• Recommended Roof Rack for 2023 Jeep Wrangler 4xe To Carry Kayaks Above Sky One Touch Soft Top Roof
  For your 2023 Jeep Wrangler 4xe with the Sky One Touch soft top I recommend using the Rhino-Rack Vortex roof rack. For this you will need the Crossbars # RRVA150B-2, Legs # RL210S2 and Adapters # RRVA-FK1-2. I have included an image below on how this rack will look with your particular roof opening. Do understand this image shows their square bars and not the Aero bars I listed above. I recommend using the Thule Hullavator Pro Kayak Roof Rack # TH898 as this allows you to lower the mounts...
  view full answer...
  
• Rhino-Rack Roof Rack Fitment with Sky One Touch Roof on a 2021 Jeep Wrangler Unlimited
  Yes, you can use the Rhino-Rack SG Roof Rack for Rain Gutters # RRSG59 with the Sky One Touch roof on your 2021 Jeep Wrangler Unlimited as long as you don't open up the roof with the roof rack installed. If you wanted an option with enough clearance that you don't have to worry about it making contact with the Sky One Touch then we have that as well with the following parts: 59" Vortex Aero Crossbars - # RRVA150B-2 Gutter Mount Legs - # RL210S2 Fit Kit - # RRVA-FK1-2 Attached are review...
  view full answer...
• Recommended Cargo Box for Roof Rack with 42 Inch Crossbar Spread
  I have a solution for you, but you're not going to be able to use the # TH27PQ to accomplish this. You'll need to find a cargo box that can be used on roof rack systems with a 42" crossbar spread and the only option we have for that is the Yakima SkyBox 21 # Y07337 -which has a maximum allowable crossbar spread of 42" and will mount to round, square, aero, elliptical, and most factory crossbars (maximum dimensions of 3-1/2" x 1-11/16"). The Yakima SkyBox does come equipped with locks for...
  view full answer...
• Recommended Roof Rack for a Hullavator on a 2019 Jeep Wrangler Hard Top
  Yes, there is a Thule roof rack that will accommodate a Thule Hullavator but you will need one with longer crossbars. The Thule Hullavator item # TH898 requires crossbars that extend 4" - 8" past the legs to allow the lift assist function to work. You will need the following parts: Thule ProBar Evo Crossbars - Aluminum - 69" Long - Qty 2 item # TH713600 Rapid Gutter Feet for Thule Crossbars - Rain Gutters - 5" Tall - Qty 4 item # TH65BJ This system is compatible with the Thule Hullavator...
  view full answer...
• Recommended Roof Rack for a 2021 Jeep Gladiator Using a Hullavator
  Yes, we do. To carry the Thule Hullavator item # TH898 on your 2021 Jeep Gladiator Sport, I recommend the roof rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2 item # RRVA180B-2 RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars - Track Mount - Qty 4 item # RRVA-FK1-2 Rhino-Rack Roof Rack Legs - Gutter Mount - 4-5/16" Tall - Qty 4 item # RRRL110S5-2 These crossbars are 12" longer than the item # RRVA150B-2...
  view full answer...
• Which Rhino-Rack Roof Rack Will Mount To The Gutters On My 2021 Jeep Wrangler?
  I have a solution for you, but the Rhino Rack Track Mounted Roof Rack 54" # Y02-480B-NT that you were looking into is actually for roof tracks, not roof gutters. Also, the 54" crossbars are not the recommended setup according to Rhino-Rack. For your 2021 Jeep Wrangler you will want to go with Rhino-Rack Vortex Aero Crossbars Black - 59" Long # RRVA150B-2, Adapters # RRVA-FK1-2, and Gutter Mount Legs # RRRL110S5-2. Another option is to go with the flush-mount system: Rhino-Rack SG Roof...
  view full answer...
• Comparing Rhino-Rack Vortex Aero and Heavy-Duty Crossbars for a 2023 Jeer Wrangler
  I recommend using aero style crossbars on a 2023 Jeer Wrangler. The Rhino-Rack Vortex Aero Crossbar System part # RRVA150B-2, part # RRVA-FK1-2, and part # RRRL110S5-2 in particular. The aero style bars are most versatile with rooftop accessories and they will be the quietest. They can also be used for lumber but for this I do also recommend the Load Stops for Rhino-Rack Vortex Aero Crossbars part # RRRLH2. I don't recommend the Rhino-Rack Heavy-Duty Roof Rack Crossbars since they don't...
  view full answer...
• Roof Rack for 2022 Jeep Wrangler Unlimited for Roof Top Tent
  All of the roof racks we offer for your 2022 Jeep Wrangler Unlimited with the sky top roof have a 100 lb dynamic (when in use on highway) roof capacity including the Yakima Round Bar Rack # Y00409 and # Y00101 as well as the Rhino Rack roof rack part # RRVA150S-2, # RL210S2, and # RRVA-FK1-2. In general I prefer the Rhino Rack as you get a higher quality roof rack that has aero shaped bars which do better with wind noise as a better price than the similar quality racks that cost a lot more.
  view full answer...
• Is There A Yakima Landing Pad That Works With A Rhino Rack Rail And What Are My Options
  I may have a potential solution for you, but there is not a Yakima landing pad that is compatible with the Rhino rack tracks. If you need to mount crossbars to Rhino Rack brand tracks, you would need Rhino rack bars, and towers. I recommend using the #RLTP for the legs, the Aero bar adapter # RRVA-FK1-2, and a set of crossbars like the # RRVA150B-2. This is a 59" crossbar. I see that you were searching for parts for a 2021 F-150. If so, these crossbars will be the correct size for the...
  view full answer...
• Roof Rack and Cargo Carrier for 2017 Winnebago Travato on Ram ProMaster 3500 Chassis
  Does your 2017 Winnebago Travato on a Ram ProMaster 3500 chassis already have a roof rack? If not Rhino Rack has an option that is a fit for this chassis which consists of Crossbars # RRVA180B-2, RLTP Legs for Factory Fixed Mounting Points # RRRLTPFD and RLTP Leg Adapters # RRVA-FK1-2. If the solar panel on your Winnie is in the middle of the rig and can potentially interfere with installing this roof rack another option to consider is the SeaSucker Monkey Bars Roof Rack # 298-SX6000B...
  view full answer...
• How to Reduce Wind Noise for Rhino-Rack Vortex Roof Rack on 2021 Jeep Wrangler
  I think your issue is twofold; you are using the taller 8-1/4" Tall Legs # RL210S2, and you aren't using the RLTP Leg Adapters # RRVA-FK1-2 (according to what was on your order with us.) The correct parts for the gutter mount roof rack for your 2021 Jeep Wrangler includes the following: 59" Vortex Aero Crossbars - # RRVA150B-2 RLTP Leg Adapters - # RRVA-FK1-2 4-5/16" Tall Gutter Mount Legs - # RRRL110S5-2 Normally I would say you can just add a fiairng to help direct the wind over your...
  view full answer...
• How to Add Awning to 2022 Jeep Wrangler Unlimited With Sky One-Touch Top
  So you can definitely add an awning to your 2022 Jeep Wrangler Unlimited with the Sky One-Touch top, but not with the direct-mount Hideaway; you'd need to add a roof rack and then an awning that attaches to the crossbars of the rack. So first, for the roof rack, here is what you'd need: - Rhino-Rack Vortex Aero Crossbars - Silver # RRVA150S-2 or Black # RRVA150B-2 - Rhino-Rack Roof Rack Legs - Gutter Mount # RL210S2 - RLTP Leg Adapters # RRVA-FK1-2 You will still be able to open the...
  view full answer...
• Roof Rack That Fits A 2018 Ram ProMaster 1500
  I took a look at the picture you're referencing and it appears to be similar to the Rhino-Rack RTC-Style Roof Rack Tracks # RTC18 with the RLTP Legs # RRRLTPFD. I do have have a solution, however the roof rack mentioned above with the feet will not fit your ProMaster. If you're still wanting a roof rack, the Rhino Rack Vortex Aero Crossbars # RRVA180B-2, with the legs # RRRLTPFD, and the leg adapters # RRVA-FK1-2 is confirmed to fit your vehicle, and has a maximum weight capacity of 165-lbs.
  view full answer...
  
• Will A Gutter Mounted Rhino-Rack Roof Rack Clear A 2023 Jeep Wrangler Sky Top
  Hi Nathan, The Rhino-Rack Roof Rack Legs # RRRL110S5-2 are a fit for the gutters on your 2023 Jeep Wrangler, but they are only 4-5/16" tall so you'd likely run into clearance issues with the sky top. To confirm you can measure up 4-5/16" from the lip of the gutter and see if the sky top sticks up enough to catch where the crossbar would sit. If you haven't had crossbars on any of your vehicles with the roof open then I do want to note that the wind hitting the crossbars is annoying loud...
  view full answer...
• Rhino-Rack Roof Rack for a 2017 Chevrolet Express Van to Mount Solar Panels
  I would not recommend going with the Rhino-Rack Roof Rack Legs # RRRL110S5-2 over the # RRRL150GMC-2. While both are gutter mount options, the # RRRL150GMC-2 have been confirmed to fit and provide the proper roof clearance for adding crossbars to your 2017 Chevrolet Express Van. As for the crossbars themselves, they are an "overhang" style. So if the roof of your van is only 59", then you can use the Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 (59" black) or # RRVA150S-2 (59" silver)....
  view full answer...
• Roof Rack for 2023 Jeep Wrangler 4xe with Sky One-Touch Roof
  The Rhino-Rack Vortex Aero Crossbars part # RRVA150B-2 will work great on a 2023 Jeep Wrangler 4xe with Sky One-Touch Roof when combined with the Rhino-Rack Roof Rack Legs part # RL210S2 and RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars part # RRVA-FK1-2. In regards to security, there aren't traditional locks for the mounting feet but they will require a security tool for install and removal which is not something everyone has therefore there is actually built-in security. There...
  view full answer...
• What Is The Weight Capacity Of The Rhino Rack Gutter Mount System On A 2022 Jeep Wrangler Unlimited?
  Installing a Rhino Rack gutter mount roof rack system on your 2022 Jeep Wrangler Unlimited will give you 88 pounds of carrying capacity. The Vortex Aero Crossbars # RRVA150B-2 will give you 59" of usable space as well. To complete this set up, you will need the Rack Legs - Gutter Mount - 4-5/16" Tall # RRRL110S5-2 and RLTP Leg Adapters # RRVA-FK1-2 to attach the bars. Just as a side note, if you have the Sky One-Touch Power Top, we have found that the Gutter Mount - 8-1/4" Tall # RL210DS8...
  view full answer...
• Picture and Video of Rhino Rack Roof Rack Installed on 2017 Ford Transit T150
  The Rola roof rack you mentioned is not a fit for your 2017 Ford Transit T150 which means it wouldn't work on your vehicle and we definitely don't have pictures of it installed. The most similar roof rack we have for your 2017 Ford Transit T150 is the Rhino Rack roof rack part numbers # RRVA180S-2, # RRRLTPFC-2, and # RRVA-FK1-2 which we had the chance to install on a similar T150 as yours. I attached an install video as well as an install picture for you to check out as well. When the...
  view full answer...
  
• Rhino-Rack Roof Rack Gutter Mount Fit For 2021 Jeep Wrangler Sky One-Touch Roof
  I checked with Rhino-Rack for you in order to confirm the correct parts you will need for your 2021 Jeep Wrangler with the Sky One-Touch roof, and what you will need are gutter mounts that are 11 inches high. With that height you will be able to utilize your Jeep's Sky One-Touch without interference from the rack. The parts that you will need are the following: - Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 - RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars # RRVA-FK1-2 - Rhino-Rack...
  view full answer...
• Roof Rack Recommendation for 2019 Wrangler Rubicon Unlimited with the Black Hard Top
  The vacuum cups of the SeaSucker roof rack part # 298-SX6000B that you referenced are 6 inches in diameter so based on the picture you sent in the ridges would interfere with this kit installing. So you'd have to go with a roof rack that uses a universal style gutter-mount like the Rhino-Rack Vortex Aero Kit part # RRVA150B-2, # RRVA-FK1-2, and # RRRL110S5-2 which is a confirmed fit.
  view full answer...
  
• What Crossbar System Fits My 2021 Jeep Wrangler with a OneTouch Skytop Roof?
  For a roof rack system that fits on your 2021 Jeep Wrangler with a OneTouch Skytop roof, you need gutter mounts that are 11 inches high. With that height you will be able to utilize your Jeep's Sky One-Touch without interference from the rack. For a great rack that has 11-inch gutter mounts, I recommend the following parts: - Rhino-Rack Vortex Aero Crossbars # RRVA150B-2 - RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars # RRVA-FK1-2 - Rhino-Rack Roof Rack Legs - Gutter Mount - 11"...
  view full answer...

Do you have a question about this Roof Rack?