This sleek, aerodynamic roof rack provides space to carry gear on your vehicle. Crossbars with push-down rubber strips in top channels work with channel-mount and clamp-on accessories. Installs to flush rails on your vehicle's roof. Great Prices for the best roof rack from Inno. Inno Aero Roof Rack for Flush Rails - Aluminum - Black - Qty 2 part number IN65JR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (963)
Q & A (0)
Related Parts
Photos
Inno Roof Rack
- IN65JR
Features:
Complete roof rack system includes 2 aero crossbars, 4 through feet, and a custom fit kit for your vehicle
Aero-style crossbars work with accessories that mount in the top channels or clamp around the bars
Compatible with most universal cargo, water, snow, and bike carriers
Top channels with push-down rubber strips let you press hardware into the tracks - no trimming required
Strips help reduce wind noise and vibration while you're driving
Lockable leg covers deter theft of the rack
Custom installation to the flush rails on your roof
Specs:
Crossbar dimensions: 48" long x 3-1/8" wide x 1-3/16" tall
Top channel dimensions: 13/16" wide x 1/4" tall x 3/8" opening
Weight capacity: 165 lbs
Always observe your vehicle's maximum roof load capacity
Color: black
Construction: aluminum
Limited lifetime warranty
XB123 Inno Aero Aluminum Load Bars - Black - 48" Long - Qty 2
XS450 Inno Aero Bar Through Stays for Flush Side Rails - Qty 4
K710 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
This sleek, aerodynamic roof rack provides space to carry gear on your vehicle. Crossbars with push-down rubber strips in top channels work with channel-mount and clamp-on accessories. Installs to flush rails on your vehicle's roof.
I'll start out with the easiest part of your question in saying that footpacks between the two manufacturers are not going to be compatible, so you wouldn't be able to use Inno footpacks with a Thule tower or vice versa.
When it comes to the cross bars, the Thule Vortex Aero Bars # TH711520 and Inno Aero Crossbars # INXB123-2 are going to be very close to the same size and they will mount in a similar manner on a foot pack, so you are able to use an Inno Aero Crossbar on a Thule tower... view full answer...
For your 2022 Chevy Traverse that has a naked roof we have the Inno roof rack part numbers # INXB123-2, # INXS200, and # IN63FR which would work great. It clamps around the door frame so it's pretty easy to install and remove as well. It would be great for a temporary install or to be left on for a decent amount of time. The bars are aero shaped too which means there would be minimized wind noise. view full answer...
The Inno Aero Crossbars - Aluminum - Black - 48" Long # INXB123-2 with Inno Flush Feet # INXS100 that you mentioned are confirmed to fit the roof of your 2020 Ford Explorer ST with factory raised rails running front to back. These crossbars meet the requirements for the Yakima CBX Rooftop Cargo Box - 18 Cubic Ft - Black # Y86FR so it will be a nice setup for you.
The cargo box will simply clamp around the crossbars with the included clamps. This is a very nice box which has an integrated... view full answer...
I have a great crossbar solution for you to use the Inno Locker # INXA445! For your 2004 Honda Accord 4-door with a naked roof, the Inno Locker will attaches as long as you have aero crossbars that have top channels that extend the length of the crossbar. For 100% definite compatibility with the Inner Locker on your roof, I recommend the following crossbar setup:
- Inno Aero Crossbars - Aluminum - Black - 48" Long # INXB123-2
- Inno Through Feet for Aero Crossbars - Naked Roofs # INXS250
-... view full answer...
If you're wanting to get the Inno roof rack system on your 2000 Honda CR-V, you will need the Inno Aero Crossbars # INXB123-2, Inno Through Feet # INXS250 and the custom Fit Kit # INK146. These have a dynamic weight capacity of 165 lbs. This Yakima SkyRise Tent # Y07437 requires a minimum of 165 lbs of dynamic weight capacity.
Dynamic is the weight in motion and static is the weight when sitting still. So you will be good to put a Yakima tent on top. view full answer...
I have a solution for you, but the Yakima Skybox NX 16, part # Y95AV won't fit the factory crossbars on the 2013 Ford Explorer. The factory bars are too far apart when installed, and a little too wide to use safely with the Skybox NX 16.
You'll want to go aftermarket and pick a rack that is quickly removed when not in use (And secure when it is) so you can remove them and avoid the "Double crossbar" look on the vehicle.
I recommend Inno's FlushBar system, consisting of:
Flush Bar Foot... view full answer...
We can't have the family going hungry!
Yakima and Thule do make a high quality product, but they do get every penny for it. Another brand name you might not be so familiar with is Inno. They are very well known on the west coast, but not necessarily in the rest of the country. Inno offers high quality roof roof rack components at a lower price than their main competitors. I'd recommend the Inno Aero Crossbar system, which would consist of the following parts:
Inno Aero Crossbars, in black... view full answer...
We have roof racks that are a fit for your 2000 Honda Civic sedan but Sportrack does not have any fits for the sedan models of your vehicle. Also worth mentioning is that the Sportrack roof racks don't generally fit well so we try not to recommend them since they are only a semi-custom fit and not a full custom fit.
Instead the Inno roof rack part # INXB123-2, # INXS250, # INK707 would be your best option. This the best priced option that fits your vehicle, it's a custom fit rack so it... view full answer...
The Inno Gravity Ski and Snowboard Carrier will fit on your 2014 Subaru Forester if you have aftermarket crossbars. The OEM crossbars did not have the top channel so if you have those bars I recommend the Inno Gravity Ski and Snowboard Carrier - Clamp On - Locking - 6 Fat Skis or 4 Boards # INA951 for a similar rack.
If you don't already have crossbars, I recommend the following options that will be compatible with the Inno Gravity carrier:
If you have the factory side rails that run... view full answer...
I have a great kayak carrier solution for you that works with your trifold tonneau cover. Unfortunately, I confirmed with our ladder rack manufacturers that we currently do not have a fitment of a ladder rack that will allow you to simultaneously install the rack with the cover installed.
However, we do have a great roof rack option that allows you to transport your kayaks on the roof of your 2022 Ford Maverick to allow you to have a fully-functional tonneau cover. For that route, I recommend... view full answer...
I have a great solution for you. While we don't have a complete interchangeable roof rack that fits both your 2011 Volkswagen Jetta (bare roof) and your 2007 Toyota Matrix (bare roof), we do have a system that can use the exact same crossbars and mounting feet. The only difference between the two sets of roof racks are the fit kit that connects the feet to the roof of the vehicles. The difference parts are needed because fit kits are designed for specifically to fit the contours of roofs... view full answer...
A great all around roof rack for your 2006 Range Rover HSE with no overhang is the Inno Aero Roof Rack system with part numbers # INXB123-2, # INXS200, # INK263. I recommend this over the other roof racks that fit your vehicle because this system uses 48" crossbars # INXB123-2 compared to the other longer 60" crossbars. If you need more space, then get a roof rack with longer bars, but if your priority is a low-profile and sleek look, then the Inno Rack is ideal. The Inno Aero Crossbars... view full answer...
The correct fit kit for installing the Rhino-Rack 2500 Series Legs # RRRLKVA (for crossbars like # RRVA126B-2) to your 2004 Toyota Matrix is part DK062.
This has been discontinued though so if you aren't able to find it somewhere like on a marketplace then I recommend going with the Inno roof rack instead since it's similar to Rhino-Rack both in price and in quality. Here are the parts you'll need for your Matrix:
- 48" Crossbars # INXB123-2
- Through Feet # INXS250
- Fit Kit # INK501 view full answer...
Rhino Rack does not make a Pioneer Platform for the 2015 Scion xB. Yakima makes a similar 55" long x 49" wide platform, but the weight limit is 165 pounds, well under your needs. It also requires a fit kit that is not compatible with the Scion roof. Further, you will need to check your owners manual for your vehicles roof weight limit. I suspect it is below well below 165 as well.
The only similar thing we offer is the Inno Roof Rack that supports 120 pounds – the most of all the Scion... view full answer...
I have the exact measurements to fit the Inno Roof Rack with part numbers # INXB153-2 (or # INXB123-2), # INXS250 ( or # INXS200), and # INK300 on your 2009 Scion xB. It sounds like the confusion comes from how there are different install instructions for the different parts and they must be used simultaneously.
What will help you out here is the install guide for your fit kit # INK300. These are the clamps and pads that were designed specifically for your 2009 Scion xB. What you're looking... view full answer...
Yes, the Inno Through Feet for Aero Crossbars # INXS150 will work with the Inno Aero Crossbars - Aluminum - Black - 48" Long - Qty 2 # INXB123-2 on your 2008 Honda Pilot. view full answer...
The SportRack Vista Roof Mounted Cargo Basket # SR9035 will fit the Inno Aero Crossbars # INXB123-2 (you will also need the Inno Flush Feet for Aero Crossbars # INXS100 to mount these to your 2021 Ford Explorer). The SportRack Vista Roof Mounted Cargo Basket # SR9035 will fit crossbars up to 3-1/2" wide and the Inno Aero Crossbars # INXB123-2 are 3-1/8" wide, so you are good to go. view full answer...
For your 2016 Honda HR-V with factory flush rails the Inno fit kit part # INTR159 can be used but you need to use the Inno roof rack components part numbers # INXS450 and # INXB123-2.
This will attach through the factory fixed mounting points of your roof and does not clamp around the door frame. It can't be used with Honda brand crossbars. view full answer...
We have already done the work for you!
If you click on the page link provided you will see all aftermarket roof rack products confirmed for your 2012 Infiniti QX56 that has raised roof side rails that run front-to-back. These various roof racks have crossbar lengths that vary considerably, from 48-inches as with the Inno Aero rack made of parts # INXB123-2 and # INXS100, up to 65-inches as with the Malone Universal Rack # MPG203. The choice depends on your budget, preferred appearance... view full answer...
Inno test fit their roof rack part numbers # INXB123-2, # INXS250, and # INK163 on a 2008 Mazda RX-8 just like yours and they determined it fit well. While we haven't had the chance to test the fit we can guarantee it will fit your vehicle and work great!
I attached a link to this page for our return policy but you wouldn't need to worry. view full answer...
I can definitely help you out in finding the best roof rack option for your 2014 Mini Countryman S R60. Any of the below options will allow you to use your Inno box and Yakima bike/kayak accessories.
2014 Mini Countryman Roof Rack by Inno
- Inno Aero Crossbars # INXB123-2
- Inno Through Feet for Aero Crossbars # INXS450
- Custom Fit Kit for Inno # INTR142
2014 Mini Countryman Roof Rack by Thule
- Thule WingBar Edge Crossbars # TH96FE
- Edge Flush Rail Feet for Thule Edge Crossbars #... view full answer...
The Inno Roof Rack consisting of the # INXB123-2 48 inch crossbars and the # INXS100 flush roof rack feet would be a fine choice for your 2020 Infiniti QX80, and is a confirmed fit per Inno.
The Inno Aero Crossbars measure 3-1/8 inch wide by 1-1/8 inch tall and the Rhino-Rack # RMCB is compatible with crossbars up to 3-1/2 inches in width and 1-1/2 inches tall, so they'll work just find together.
I've linked to a demonstration video showing the features of the Inno Aero flush roof rack. view full answer...
The Thule AeroBlade Edge Roof Rack 7501B is not a confirmed fit for your 2010 Ford Explorer.
For a compatible roof rack on your 2010 Ford Explorer with raised rails, you can use the 2010 Ford Explorer Roof Rack by Inno which consists of the:
- Inno Aero Crossbars # INXB123-2
- Inno Through Feet for Aero Crossbars # INXS150 view full answer...
Yes, for your 2003 Toyota RAV4 I'd recommend checking out the Inno Aero Crossbars # INXB115-2, with the Inno Through Feet for Aero Crossbars # INXS250, and the Custom Fit Kit # INK244.
These crossbars measure 45" long, 3 1/8" wide, 1 1/8" tall, and have a maximum dynamic weight capacity of 165 lbs.
This system is designed to be used with a naked roof, which is what I assume you have but If you have factory rails already then you'd want the Inno Aero Crossbars # INXB123-2 with the feet... view full answer...
In order to use the Thule Hullavator Pro Kayak Carrier # TH898 on your 2016 Audi Q3 you need to have crossbars that extend 4"-8" past the feet of the roof rack. With the slope of your car, you would just want to be closer to the 8" side of that. Just measure the distance between the points on your roof where the feet will be installed and add 16" (8" to each side) then select the crossbars closest to that measurement.
The widest roof rack for your 2016 Audi Q3 that we have is the 2016... view full answer...
The Yakima SkyRise HD Tent for Roof Rack Crossbars - 2 Person - 400 lbs - Tan and Red # Y07436 weighs 101 lbs and can support up to 400 lbs. It can be installed on roof racks that are rated for 165 lbs capacity but they can not work with roof racks that require clips for fit. It is compatible with vehicles that have raised side rails, fixed mounting points, or flush side rails. The extra weight is largely supported by the ladder of the tent.
If you have the flush mounted side rails... view full answer...
In order to carry two kayaks on the roof of a 2018 Honda HR-V you'll first need a roof rack, the Inno Aero Crossbar System part # NXB130-2, part # INXS450, part # INTR159 is the best cost effective option with aero crossbar and it works on models with the flush side rails.
Then in order to secure the kayaks you'll need to do so on their side, the etrailer J-Style Kayak Carrier part # e98878 (2) is what I recommend and it comes with everything you need. They have a 150 lb capacity. view full answer...
Since your 2022 Honda HR-V has the flushed rails all of the roof rack fits will have the same crossbar spread as they used pre-existing fixed points to anchor the roof rack. So what it will boil down to for your application is price vs quality and for the best option I recommend the Inno Aero roof rack setup:
51" Aero Crossbars - # INXB130-2
Through Feet - # INXS450
Fit Kit - # INTR159
The Inno brand has a sleek look and doesn't lack in quality, plus their price point is really hard to... view full answer...
While there is a way to carry your bike with your 2022 Lexus UX 200, I checked with the hitch manufacturers and there are no hitches for the UX model of Lexus for any model year. So the only option to carry your bike with this vehicle would be with a roof rack and roof-mounted bike rack. While I know that isn't the news you were looking for, it is the only way to carry a bike with this vehicle.
What I recommend is going with something that will still be quality but is more economical... view full answer...
The fishing rod carriers we have are universal mount options but to use them with your 2022 BMW X3 we need to get a roof rack on your vehicle and for that I recommend the Inno Aero Roof Rack System which uses the following:
54" Inno Aero Crossbars - # INXB138-2
Through Feet - # INXS450
Fit Kit - # INTR140
Now that you have a roof rack we can look at various options like the Rhino-Rack 4 Rod Carrier # RR572, the Yakima TopWater # Y04088, or the Thule Rod Vault # TH87YV for fly fishing... view full answer...
Yes. The Inno Roof Rack System that uses parts # INXB138-2, # INTR140 and # INXS450 is the correct fit for your 2017 BMW X5 and has been confirmed. I've linked a photo of the way these attach to the rails and you can see the clamp that will attach to the outside of the flush mounted rails on your X5, and provide a secure fit. view full answer...
As long as you install a roof rack like the Inno Aero consisting of # INXB123-130, # INXS450, and # INTR163 on your 2018 Lexus RX 350 F-Sport the Thule Motion XL part # TH629807 will fit and work great. The Hyper you referenced has been discontinued.
The Aeroblade Edge roof rack I mentioned is a great option too that I recommend as well because it has aero shaped bars that will be very quiet and the bars do not extend past the feet of the rack which gives a clean, OEM style look. view full answer...
The Inno Aero Bar Roof rack part numbers # INXB123-130, # INXS450, and # INTR163 would add about 3-1/8 inches to the top of the flush bars of your 2022 Lexus RX 450h.
The Inno Wedge 660 Rooftop Cargo Box # INBRM660WH would add an additional 11 inches and the Thule Motion XT Alpine part # TH629506 would instead add an additional 13-1/4 inches. view full answer...
When comparing the Malone and Rhino-Rack cargo boxes I recommend Rhino-Rack. Malone is more of an entry-level product line while Rhino-Rack is more of the mid-tier brand and quality - so while they both might be priced around the same and have similar features, I can guarantee the Rhino-Rack is built better.
I then recommend pairing this with the Inno roof rack system for the flush rails on your 2016 Audi Q5 because they have great quality at a mid-tier price-point as well. This means... view full answer...
Yes, there are Inno roof rack fits for the flush rails on your 2021 BMW X3. I prefer the crossbars that overhang the legs instead of ending in them because you get more real-estate to work with but there is something to be said for the sporty look the latter offers. Below are the parts needed for either roof rack style for your vehicle.
Flush Feet Style (Sporty)
42" Aero Crossbars - # INXB108-2
Flush Feet - # INXS400
Fit Kit - # INTR140
Through Feet Style (Standard)
54" Aero Crossbars... view full answer...
You can use the same Inno crossbars for your 2017 Ford Expedition and 2021 Volvo XC60, but you'd need different feet for each as the Volvo technically uses flush rails (which are raised up but still considered flush). So the part numbers you mentioned will work on your Ford, but not the Volvo. Here's what you can use:
2017 Ford Expedition
- Inno Aero Crossbars # INXB130-2
- Inno Through Feet for Aero Crossbars - Raised Side Rails # INXS150
2021 Volvo XC60
- Inno Aero Crossbars # INXB130-2
-... view full answer...
For your 2016 Honda HR-V with the flush mounted side rails, the Rhino Rack roof rack is no longer a confirmed fit from the manufacturer. For a confirmed fit I recommend the Inno Aero roof rack consisting of # INXB130-2, # INXS450, # INTR159.
This roof rack is compatible with theTrunx Rooftop Cargo Carrier - 9 cu ft - Black # TRX44FR when you space your crossbars 22 inches on center.
This combination will work well for you. view full answer...
I will start with the good news, the Custom Fit Kit for Inno # IN93FR is the TR183. The TR183 is the manufacturers part number and the IN93FR is our number for the same TR183.
From there you will use the Inno Through Feet for Aero Crossbars # INXS450 for either the Inno Aero Crossbars # INXB123-130 (48" & 51") or # INXB130-138 (51" & 54"), the difference is the length of crossbars.
The third option you mentioned use the Inno Flush Feet for Aero Crossbars # INXS400 and the Inno Aero Crossbars... view full answer...
Yes, I do. The Inno roof rack you were looking at would be just over 3" taller than the top of your 2019 Land Rover Discovery's roof rails. It includes the following parts:
Inno Aero Crossbars - Aluminum - Black - 51" Long and 54" Long - Qty 2 item # INXB130-138
Inno Through Feet for Aero Crossbars - Flush Side Rails - Qty 4 item # INXS450
Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet item # IN68FR view full answer...
Inno's fitguide is who we base our roof rack fits on as they are who test fit and design the fits for the vehicle. For that you'd need the part # INXS450, the # INTR139, and two of the # INXB123 if you don't have them already! view full answer...
All of our 2016 Honda HRX roof rack options would fit your LX model.
The INNO rack part numbers # INB127, # INSUT, and # INK878 would be a great rack for your naked roof.
If you happened to have raised rails you instead would want the part numbers # INXB130-2, # INXS450, and # INTR159. view full answer...
I do have some options for you, but you will need to use a combination of equipment to be able to use crossbars on both your 2011 Acura TSX and your 2014 Audi SQ5.
The Inno roof rack that you will want to use on your Acura is:
Inno Aero Crossbars - # INXB123-130
Inno Through Feet - # INXS150
The Inno roof rack that you will want to use on your Audi is:
Inno Aero Crossbars - # INXB130-2
Inno Through Feet - # INXS450
Inno Custom Fit Kit - # INTR138
Since your 2 vehicles must use slightly... view full answer...
For your 2016 Honda HR-V with factory flush rails the Inno fit kit part # INTR159 can be used but you need to use the Inno roof rack components part numbers # INXS450 and # INXB123-2.
This will attach through the factory fixed mounting points of your roof and does not clamp around the door frame. It can't be used with Honda brand crossbars. view full answer...
Rhino-Rack ROC25 Vortex roof rack # RR62XR will fit your 2016 Honda HR-V if it has a naked roof (no rails or bars of any kind).
If your HR-V has flush mount rails that run front to back then you would need a different roof rack using the following parts:
Inno Aero Crossbars - Aluminum - Black - 51" Long # INXB130-2
Inno Through Feet- Flush Side Rails - Qty 4# INXS450
Custom Fit Kit # INTR159 view full answer...
All of the crossbar sizes of the Inno Aero crossbars that we have listed as confirm fits for your 2020 Mercedes-Benz GLA 250 are the available size options that Inno has for you based on your crossbar length needs for the vehicle. Depending on what accessories/cargo you need to transport, you can use more or less crossbar space. The length does determine how long the crossbars stick out past the feet. If you are planning on transporting a kayak, I recommend the longer roof rack bar system... view full answer...
I can definitely help you out in finding the best roof rack option for your 2014 Mini Countryman S R60. Any of the below options will allow you to use your Inno box and Yakima bike/kayak accessories.
2014 Mini Countryman Roof Rack by Inno
- Inno Aero Crossbars # INXB123-2
- Inno Through Feet for Aero Crossbars # INXS450
- Custom Fit Kit for Inno # INTR142
2014 Mini Countryman Roof Rack by Thule
- Thule WingBar Edge Crossbars # TH96FE
- Edge Flush Rail Feet for Thule Edge Crossbars #... view full answer...
I reached out to Inno and the # INXB138-2 and # INXS450 have not yet been approved for a 2022 BMW X4. However, I also reached out to Yakima and Thule, and Thule did have something that will fit your new vehicle.
To do this, you will need to start with the Fit Kit for Thule Evo Flush Roof Rack Feet # TH186007. These are specifically designed for the flush rails you have on your X4 and will allow you to get the Evo Flush Rail Feet # TH710601 attached. From here, you will need the Thule WingBar... view full answer...
The glass Vista roof on your 2015 Ford Edge Titanium means you'll need to install a roof rack to carry your surf and snow boards since the glass roof cannot handle their weight. Please click on the link provided to see roof rack options for your Edge. At the top of the page select your roof style, either a bare roof with no rails or bars, or a roof with flush-mount rails that run front-to-back. Once you click on your roof type you'll see all available options.
If you have a bare roof we... view full answer...
The 2020 Honda Accord Roof Rack by Inno has a bar spread of 26 1/4". It consists of the following;
Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127, the
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4, part # INSUT, and the
Custom Fit Kit for INSU-K5 Roof Rack Feet K710, part # IN95FR.
This roof rack has a weight limit of 120lbs. With the square crossbars you can attach any accessories that clamp to crossbars. This rack has locking torque knobs that... view full answer...
Hey William, for the Inno roof rack that fits your 2022 Buick Envision the front crossbar will set 11-3/4 inches forward of where the front and rear doors meet and to the rear bar from that same point it will need to measure 14-1/2 inches. view full answer...
Info for this part was:
Expert Research:
Jameson C
Edited by:
Daron K
Updated by:
Alex H
Updated by:
Michael B
Written by:
Ashley K
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.