Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
Features:
Thule WingBar Evo Crossbars 50" - Silver - Aluminum - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey folks, it's Brad at etrailer, and today, we are putting a WingBar Evo System Roof Rack on our 2018 Ford Fiesta. The Ford Fiesta is a subcompact car, this one in particular is the ST model, which is a great little fun performance car, but downsides would be storage, it does have a hatchback, but it's relatively small. This is my personal car, and I have two car seats in the back. So having added storage, or the ability to take my bike, cargo carrier, or any other things I need on a trip, really comes in handy with a roof rack system. This roof rack will give you 47 inches of real estate to really work with for whatever you have. Now, the Wing Evo System on the Thule Roof Rack is really nice, kind of just slide this over.
And as you can see in this slot here, it does allow for their T-track system, so a lot of Thule accessories will fit this perfectly. So as you can see here, this is lockable, so if you have your expensive items on here, or even just the rack itself, this can prevent it from being stolen. Now you can get lockable cores to match all your other Thule accessories, which is really nice. So each bar has a weight capacity of 110 pounds, so, between the two of them, you have a total of 220 pounds that you can put on top of your car safely. So that allows for quite a bit of storage of whatever things you're bringing to campsite, or any activity that you're going to.
Roof rack systems without existing bars can sometimes be scary on a car that you cherish. With these rubber feet and the nice tight fit, I have no worries that this will be moving around, or scratching the paint. It's also got a nice appearance to it, pretty low profile, doesn't stick out too much and kind of gives it a neat look. Now, for people that have a Fiesta, putting a hitch on it isn't ideal because it is a sportier car and any addition to weight in the rear might cause an issue. So the roof rack really is a nice option and keeps it less permanent, if you need to remove it for any reason, it's simple.
The roof rack system itself is a very easy install and can be done by yourself. So for a little bit of time for the install adds a ton of utility to this little car, let's take a look at that. So now that we have the one rack installed on the car, we're going to kind of go through and show you the breakdown of the rack itself. So here we have the bar, which you can see has rubber here for your T-track to slide in, so you can put a variety of different accessories. Something else that's nice is the almost airplane wing-shaped bar, which doesn't seem like a big deal until you've had other racks.
They create a lot of wind noise and sometimes require a fairing to cut down on that wind noise, so this aerodynamic shape will help cut down on that, and also reduce drag. Also, these V's serve as air diffuser to break up that air. So taking a look at the parts themselves, we have the bar, we have our clamp, which also with the fit kit, will come with your clamps and the feet that go on it. So all in conjunction, we'll put that together and show you how it attaches to the car. So we have the other side installed, but let me, I'm going to walk you through here and show you how the system works because looking at it, it seems like a lot of pieces, but once you kind of start working on it, it's pretty simple. So you'll see here, this is your clamp. So this is actually going to slide into here, but also you have a corresponding foot here, that's rubberized and numbered, same with your hook, also numbered. So in your instruction manual, that will break down which corner of the car it goes to, and it is specific because it contours perfectly to your specific vehicle. So, taking a look at this, there are smart slide, this has a bunch of numbers that you can see possibly up close, but when you have it in your hands, it's easy to see, so what this is going to do is slide into here. Now, one of the tricky situations with roof racks and installing them is figuring out that width to perfectly match your car, and it's kind of a guessing game of shifting back and forth. This takes care of it by telling you what spec it needs to be at, setting that, and then you know exactly where to put your foot. So for our Fiesta, we're going to set this to 36, so the line is right there. So, dual purpose, this serves as letting you know how far to put the foot, and it will move if you push it too hard, but it also closes this hole, which adds a little more aerodynamics, no wind can get trapped in there. So, take your foot, take your clamp, and what you're going to do is slide that in there, until you hear that click. Those hooks lock on top, and you know you're good there. The next thing you're going to do is take your foot, your rubber padding here, which again is contoured to your car. It's pretty simple, little squares plopped in there, and this little hook kind of goes over. It doesn't have that satisfying audible click, but you kinda know when it's seated correctly, you just kind of give it a few presses on, and you know that it's flush, like that. So next, we're going to slide it through here, now, you have this top little pin down and clip here. So, in order to loosen that to allow it to slide, you're going to see these metal brackets here, and when you push those in, that's actually going to push that forward, allowing you to slide it in, just as so, and with our slides here, we know exactly where to stop. So we have our front bar installed and per vehicle specific instructions is seven and seven-eighths back from the window. So, from having the first one already installed, we now know our distance based on the instructions of how far back. So that's something with the roof rack, is it is able to kind of move, but having those feet really attached to the points where they're recommended makes a better, secure fit. So, with our roof rack, we have both our doors open, we're going to just place it on here and then we'll get our measurements spot on after that. So just kind of reach over and you'll see that little clamp, you're gonna wanna hook that, and then you'll see you still have quite a bit of tolerance here to play with, but it's sitting up there at least, and now we can space it as necessary. So since we have our front bar installed, we can use that as the reference. So we're looking for 27 and a half, and that's from the front of this bar, to the front of this bar. So as you can see, I'm at 30, I'm going to just bump that up, you know, however many inches that is till I get 27 and a half. So it's still loose, and let's kinda see Where that puts us, so, right about there. So now I'm gonna go to the other side, kinda get that in place, and once we have them both lined up nice and parallel with the other bar, we can slowly start to tighten one side at a time. So with roof racks, it always kind of worries me that it is rubbing on the paint where it can cause damage. So it's really important to get these channels, you can see this is custom fit to the Fiesta, but there's a little lip there that goes into your rain gutter, and really putting that in place is going to give it added security. So, you may have to adjust here and there till you get the perfect fit. Now, once you go back and forth tightening, you can come to the side, this tool here, will put it at the correct torque specification when you hear the click. So give it a few twists, and listen for that sweet click, right. Wait for it. There. So that's how you know it's torqued down specifically, make sure it's done on both sides and then we'll go from there. So we have them installed, they are sturdy as can be, I can't move this. So, the finishing touches here, we have this little end cap, which is shaped just like the wing bar so make sure you have it the right way, and that should just snap into place, and that closes. You have this little cap here as well, little tabs go in there, boom. With our finishing touches in place, that concludes the install on our roof rack. So there we have it, we have the Thule Wing Evo Roof Rack System on our 2018 Ford Fiesta. This is just a really good option for those looking to add some space to a pretty small car..
Average Customer Rating: 4.8 out of 5 stars (418 Customer Reviews)
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
I've had the roof rack for a year now and we only use it sporadically in the winter to put the ski box ontop of the car but it works great. Very easy to install and remove and very sturdy. Previously I had the kind that bolted into the roof of my SUV and had a terrible experience with that (we lost the rack and kayaks on the freeway and it tore holes in my roof). The clamp style is the only kind we'll get from now on because they are much sturdier and no risk of losing them. Definitely recommend them.
I just got my packages and had it installed within the hour very satisfied
No problems installing. The rack is doing fine.
Easy to install, fit and finish are top notch.
I ordered the Thule WingBar Evo Crossbars - Aluminum - Silver - 50" with the Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet for my 2020 Mazda CX9. I appreciated the product selector to make sure I was getting all the correct parts. I was happy with the products, but I did run into an issue where 1 of the rail feet had a defective bolt which required a replacement. I was very satisfied with etrailer's customer support, and how well they worked with me to get the part replaced quickly. I'm giving this a 4 start only because of the hassle of receiving a defective one initially
Worked perfectly on my 2020 GMC Sierra. Looks and works great.
I've owned this roof rack for a year now, and it has served my purposes (carrying my kayak around on my truck) quite well. It was fairly easy to assemble, largely because the entire instruction guide was in pictures.
I have had to retighten the rack a couple of times since putting it on the roof, so I tie the kayak down to the front and back of the truck as well as to the roof rack. I suspect the ocean kayak puts a bit of lift on the roof rack resulting in the loosening.
Easy to Install with the proper components. Everything fit my 2019 Lexus RX 350 perfectly
Great quality products! Easy installation with properly guided instructions. One of the best tracking information, from ordering to delivery. Would strongly recommend etrailer to anyone looking for roof or hitch bike racks.
Product was right fit for my vehicle and installed perfectly. Etrailer was knowledgeable and got the goods to me quickly. Enjoyed working with them and will again.
Easy to install with the anchors and crossbars, and still holding up great a year later.
Excellent system
I have used these with both ski racks and big Thule cargo box. Nice and strong
I bought the Thule Evo Roof Rack to transport my kayak on my Lexus 300H. Thule will advise you on their website that his particular rack is not right for a Lexus 300H (i.e., they don't make a roof rack for a Lexus 300H); it is really for a Camry, but etrailer told me that is worked, I trusted them and they were correct. After all, a Lexus sedan is really a fancy Camry, but Thule will not acknowledge this point. It works great. Thule makes a solid product.
Sturdy and working as expected.
Seamless ordering and delivery. Video instructions very helpful
Solid foot for Thule roof rack. Used these for square bar but applicable for aero bar options as well.
Works real well!
Worked Perfect & Secured a very heavy load in extreme weather & off road conditions
Customer Service at etrailer is par none, both before the sale and after. I had an unpleasant experience elsewhere buying and installing a roof rack for my old Prius. After a few days of frustrations, I sent it back to that old online store.
This time, I contacted etrailer to see what ALL I needed to install a rack on my new 2018 Honda CRV. They sent me the part numbers and a link to purchase. Viola! After they arrived, I had difficulty with one of the parts (at 69 yo my hands are not too strong or flexible) and contacted etrailer. They sent pictures and more thorough instructions on installing the rubber strip. Another VIOLA!
I'm so very happy with my total experience at etrailer. Customer Service, truly, is not better any where else I have made online or brick-n-mortar purchases.
I have almost always had roof rails on my vehicles. My F150 had no rails and I was nervous about clamp style rack holders given what I tend to carry on top. These have been great and I am positive I have overloaded them numerous times.
I am very happy with the Thule racks purchased from etrailer for my Mazda CX-5. Everything was included, easy to fit together and the assembled racks feel very secure. To top it off, the sales help from etrailer was excellent - my original rack selection was backordered and they got in touch with me to offer one that was readily available.
This things will leave a nasty stain on your vehicle roof once is removed or adujsted. But once it latches, it will not move. works as intended
My Thule roof rack is everything I expected it to be, I’m very pleased. I had a very good experience dealing with etrailer and will definitely do business with them in the future
Easy to install, great customer service.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.