Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Let fresh air in while keeping bad weather out. These heavily tinted rain guards keep your interior dry, reduce wind noise, and help to keep temperatures down by promoting better air circulation in your vehicle.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2009 Ford Flex, we'll be installing the WeatherTech side window air deflectors with dark tinting for the front, part number WT80484. The WeatherTech air deflectors let fresh air in while keeping bad weather out and also help keep the interior temperatures of your vehicle low by promoting better air circulation in your vehicle. These leather tech air deflectors install quickly and easily inside the window channel and require no exterior tape. Let's begin here on the driver's side. We'll need to lower the window down as show and then we'll need to clean the top edge of the window with some soap and water, and then dry it with a paper towel. Now let's go ahead and begin by putting in our air deflector. We'll start up here on the front, making sure that we sit on top of the windowsill. We'll then push in the front edge. Now we'll go ahead and bend the air deflector outward so that we can get the rear edge in its window channel as well.
Once that's in we'll begin by going back up towards the front of the air deflector and gently pulling down and working it underneath the weather shipping edge, into the window channel. Now that we have the whole air deflector into the window channel, we'll make sure that it is pushed all the way up. To seat the air deflector, we'll go ahead and gently pull outward and up, seating it in the window channel as well as the weather stripping. Once we have the air deflector completely seated, now we'll have to raise and lower the window 5 times. You want to make sure that when raised and lowering your window, that'll help to make sure that the air deflector is properly seated in the window channel. Now that we've completed the installation here on the driver's side, we'll repeat the same process over on the passenger side. Again, making sure once we have the air deflector in the window channel and fully seated, that we raise and lower the window 5 times slowly and carefully. Now that we've completed our installation over here on the passenger side, that'll conclude the installation of the WeatherTech side window air deflectors with dark tinting for the front, part number WT80484 on our 2009 Ford Flex. .
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.