Stylish, sleek dinette tabletop has maple wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.
Features:
Specs:
Need to directly replace the scratched-up etrailer dinette tabletop in your RV? Or perhaps you just want to upgrade to a stronger, more durable tabletop surface? This wood-grain laminate dinette tabletop provides you and your family with a level, sturdy surface in your RV or camper to enjoy meals, play board games, or work on your laptop. The tabletop's high-density EPS foam core is strong enough to hold up through years of family dinners. And the contemporary, maple finish will look great with the decor in your RV.
Looking for a complete table with legs? We offer this tabletop with a single leg kit (e38BR, e47CR) and a dual leg kit (e28BR, e67CR) as well.
Unlike other furniture that have raw wood edges, this long-lasting tabletop has edge banding trim around all 4 sides to prevent peeling, cracking, or warping. That means it won't break if one of the kids accidentally drops a drinking glass, and it'll seal out the moisture from the spilled water. The color of trim matches the rest of the tabletop, which gives you a clean, seamless look.
There are 3 white circles on the back, which give you a general suggestion for where to mount your existing leg kit. For the best table stability, we recommend installing a 1-leg kit onto the middle circle and a 2-leg kit onto the outer circles, or no more than 24" apart. But you can install the leg kit anywhere along the internal steel mounting plate. The 30" x 10" plate will help improve screw retention for when you attach the leg kit to the tabletop.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we take a look at this replacement etrailer 40 inch by 30 inch Maple wood RV dinette tabletop. Now this part will replace or upgrade the tabletop that's on your etrailer RV dinette table, or it can be used with other dinette brands of the same size. This is designed to work as a direct replacement for the etrailer dining tables. Those tables are part number e47CR and e67CR. Both of those we sell separately on our website.
Now this is just for the tabletop itself, this does require one or two table leg kits for an nice complete setup, and those kits we do sell separately on our website, and they are are listed on this product page as a related product. They do have a flush mount table leg, which is part number e69RR, or a surface mount table leg, which is e79RR. Now this is a ultra-strong, high-density EPS foam tabletop core, ensures durability and stability. You can see it has a Maple wood-grain laminate which provides the perfect accent color for your existing decor. And it has a banding that goes all the way around the table, I want to zoom in and talk about that.
This edge banding, as they call it, you can see, this will reinforce the table sides, and it seals the moisture out, prevents the table from any peeling, cracking, or warping. Now, if I flip this over to the underside, just wanted to show you on the underside of the table. First thing you'll notice is the three large circles, and what that does, is that lets you know where the internal screw plates are that are built into this table. Those screw plates will assist with screw retention when you attach the table legs to the table, and what they're telling you with these three circles, if you're gonna attach one leg, you'll put it where the center circle is, if you're gonna attach two legs you do the two outer circles. And this circle is about the same size as the flange that's on the mounting leg, so you just put the mounting leg up onto that circle, put your screws in, it'll hold it into place.
This part is made in the USA. Few specs on this table, the length of it from this end to this end is 40 inches long, the width is 30 inches wide, and the thickness on it is about 1-1/4 inch thick. Weight on this is 20 pounds. But that should do it for the review on this replacement etrailer 40 inch by 30 inch Maple wood RV dinette tabletop..
We love the table top but a came with a little chip it should be packaged with foam all the way around, because I think UPS don’t care and probably damaged it.
To be honest with you, I think the table top by itself was pretty high priced. But we have fast delivery and in excellent condition.
Great Selection @ Great Prices w/ Free Delivery
It is pretty heavy. It weighs 23.5 pounds. I’m replacing my Airstream dinette table top, and that only weighs 11.5 pounds. I’m concerned about the ability of the pedestal to support it.
Appears to be very high quality and in perfect condition on arrival. It is about 1/2 inch wider than the original table in my Thor FW 23U, but I knew that when I placed the order.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.