RV Dinette Table - Color Match Trim

Hey Zackary, we only have the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ in black. We do not have any other color options.

Hey Steve, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced is very solid. It's not going to have any wobble to it at all.

Hey Albert; it is hard to say without knowing what table you have and what exactly those legs are like. The #e79RR is designed for the etrailer tables but it could be used on something else. Are you planning to add additional legs or replace the…

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are having…

The Solera 12V Power RV Awning Conversion Kit #LC434723 that you referenced is compatible with your Dometic awning and will easily convert it to a power awning so that you don't have to struggle to deploy it. This will simply require changing the…

According to my research, the size of a Honda EU3000 generator is 25.8 long x 18.9 wide x 22.4 high. For a carrier that will fit the generator on a 2-inch hitch receiver if you plan to operate the generator on the carrier, I recommend the 20x59 Curt…

The TorkLift Lock and Load SideKick Cargo Tray, part #TLA7901, can carry any generator that fits on it. The generator needs to have a center handle and be no more than 16 inches wide and 21-1/4 inches long. For the height there are three different…

Since your door way width is 24 inches measured from flange to flange the correct MORryde StepAbove is the part #MR26RR. The part #MR86RR is for a smaller doorway width.

Hey Roger! Since your 2024 Ford F-350 is a 4WD model the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR will fit. The only other requirement is that the truck is at stock height so as long as you haven't added a lift kit you're all…

Hey Clifton, thanks for reaching out! The TorkLift Tie Downs #TL87DR, which is a kit comprised of the F2032 and F3008 parts, will fit your 2025 Ford F-250 as long as you have the 8' bed and the factory hitch installed. If you have something else…

Hey Lester, I just ran out to our warehouse and confirmed that the base pieces of the Replacement Leg Kit #e79RR are also made of metal.

You could probably get away with using just one leg, but If you're wanting maximum sturdiness I'd definitely suggest going with at least two Replacement Leg Kit for etrailer RV Dinette Tables #e79RR or #e69RR. The #e69RR are recessed mounted,…

Hey Zackary, we only have the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ in black. We do not have any other color options.

Hey Steve, the Telescoping Dinette Table Leg with Adjustable Top and Large Base for RVs #TX73VJ that you referenced is very solid. It's not going to have any wobble to it at all.

Hey Albert; it is hard to say without knowing what table you have and what exactly those legs are like. The #e79RR is designed for the etrailer tables but it could be used on something else. Are you planning to add additional legs or replace the…

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are having…

The Solera 12V Power RV Awning Conversion Kit #LC434723 that you referenced is compatible with your Dometic awning and will easily convert it to a power awning so that you don't have to struggle to deploy it. This will simply require changing the…

According to my research, the size of a Honda EU3000 generator is 25.8 long x 18.9 wide x 22.4 high. For a carrier that will fit the generator on a 2-inch hitch receiver if you plan to operate the generator on the carrier, I recommend the 20x59 Curt…

The TorkLift Lock and Load SideKick Cargo Tray, part #TLA7901, can carry any generator that fits on it. The generator needs to have a center handle and be no more than 16 inches wide and 21-1/4 inches long. For the height there are three different…

Since your door way width is 24 inches measured from flange to flange the correct MORryde StepAbove is the part #MR26RR. The part #MR86RR is for a smaller doorway width.

Hey Roger! Since your 2024 Ford F-350 is a 4WD model the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR will fit. The only other requirement is that the truck is at stock height so as long as you haven't added a lift kit you're all…

Hey Clifton, thanks for reaching out! The TorkLift Tie Downs #TL87DR, which is a kit comprised of the F2032 and F3008 parts, will fit your 2025 Ford F-250 as long as you have the 8' bed and the factory hitch installed. If you have something else…

Hey Lester, I just ran out to our warehouse and confirmed that the base pieces of the Replacement Leg Kit #e79RR are also made of metal.

You could probably get away with using just one leg, but If you're wanting maximum sturdiness I'd definitely suggest going with at least two Replacement Leg Kit for etrailer RV Dinette Tables #e79RR or #e69RR. The #e69RR are recessed mounted,…