bing tracking image
  1. Trailer Door Holders
  2. JR Products
  3. Plunger and Socket
  4. 1-1/2 Inch Long
  5. Plastic
  6. Rubber
Low-Profile Bumper Door Holder for RV or Enclosed Trailer - 1" Stem
JR Products

Low-Profile Bumper Door Holder for RV or Enclosed Trailer - 1" Stem

Part Number: 37210665
In Stock
$13.94
Retail:$25.23
You Save: 45%
Trailer Door Holders
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Use this low-profile bumper door holder to keep your RV or trailer door open while you're loading and unloading. Bumper also prevents the door from banging into the side of your trailer. Mounting screws are included. Great Prices for the best trailer door holders from JR Products. Low-Profile Bumper Door Holder for RV or Enclosed Trailer - 1" Stem part number 37210665 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (99)
  • Q & A (0)
  • Videos (1)
  • Photos

JR Products Trailer Door Holders - 37210665

  • Plunger and Socket
  • 1-1/2 Inch Long
  • Plastic
  • Rubber
  • Straight
  • JR Products

Use this low-profile bumper door holder to keep your RV or trailer door open while you're loading and unloading. Bumper also prevents the door from banging into the side of your trailer. Mounting screws are included.


Features:

  • Low-profile rubber bumper door holder keeps your RV or trailer door open while you're loading and unloading
    • No need to get a friend to hold the door or find something to prop the door open
  • Bumper also prevents the door from banging into the side of your trailer
  • Polymer plastic stem slides into rubber socket to hold the door in place
    • No need to manually latch and unlatch like with other holders
  • Mounting screws are included


Specs:

  • Dimensions:
    • Rubber socket: 1-5/8" diameter x 1-1/2" deep
    • Rubber stem: 1" long x 7/8" wide
    • Screw length: 1-3/8"
  • Lifetime warranty


10665 JR Products Low Profile Bumper Door Holder





Video of Low-Profile Bumper Door Holder for RV or Enclosed Trailer - 1" Stem
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Hands-On with the Low-Profile Bumper Door Holder for RV or Enclosed Trailer

Hey everyone, I'm Ellen here etrailer.com. Today, we're taking a quick look at the JR Products Low Profile Bumper Door Holder. So this is just going to be a pretty simple way to keep the door on your RV or your enclosed trailer open. So the little nub here is going to just fit inside the keeper. This is going to be made of a rubber material, so it does have some give to it, so it'll stretch and conform around that little nub, and it should just pop into place. And I don't want to push that all the way in there, since I don't have the screws in place, it might be kind of hard to get out without it actually being attached, but that's basically how this is going to work.

And it does a pretty good job of holding that in place, comes with the two screws for either side of that so we can get this attached wherever we need it to be.As far as the size, I'll give you guys some measurements. So our rubber piece is about one and five eighths in diameter, one in five eights inches in diameter, and then about one and a half inches tall. Our little nub guy is about an inch tall, and then it's got kind of these flat sides on it, and that's about seven eighths of an inch across for the flex, and then if we go to the point, it's about an inch. I'll just give you the difference there, and our screws measure about an inch and three eights long, going from the bottom of the head or where the threads start on those.You just need Phillips head to get those installed, and it does come with those. It's also covered by a lifetime warranty from JR Products.

That's pretty much all there is to it for the JR Products Low Profile Bumper Door Holder. If you need any other accessories or replacement parts for your RV or enclosed trailer, you can always turn to us here at etrailer.com. We've got a lot of information and a lot of options for you guys to get down the road, and enjoy your vacation without having to worry about the parts. Thanks for watching, and we'll see you next time.

Customer Satisfaction Score:

Ratings & Reviews

4.8

99 reviews
5 Stars
(88)
4 Stars
(8)
3 Stars
(0)
2 Stars
(2)
1 Star
(1)
Review Sort Icon
by:
I had these bumper door holders on an enclosed trailer and they worked wonderfully so when I bought my shed, I wanted them for the doors as well. They hold the door even with normal strong wind gusts (I never tried them during heavy wind gust warnings). I love them. I just wish they had some extended profiles for the side door because with the handle, the door would open into the window glass with the low profile. Had these for a year and still going strong in the outdoor elements.
by:
Attention Land Rover Defender D90 Soft-Top owners. This part is a perfect replacement for your swing away tire carrier. If yours is 25 years old time to get a new one.
by:
Already put it on the day of delivery. It's works great.
by:
QUICK !! Good Job
by:
What I needed to replaced the weathered one I had on my horse trailer. Hope it lasts as long as the original one did, 25 years! Will buy this product again.
by:
May be my fault but the screws are not even close to whats in my door. Probably the wrong part for my horse trailer
by:
Just like the old one I replaced. etrailer.com is my go to for parts and have used several times.
by:
The door holder holds very well - almost too tight as it's hard to get the door back out of the holder. I might try putting a little Vaseline on plug. Tear drop trailer doors are small and the holder is located in the lower outside corner. That pretty much requires a firm low edge grip to pull the door out of the holder. The good think is that no amount of wind will loosen the door, within reason.
by:
Fast and friendly service. I was able to find parts easily.
by:
This is an exact replacement for the anchor locker hatch holder on a Boston Whaler Montauk 170 center console boat, at a fraction of the price that the Whaler dealer sells it for. Used different hardware to attach it to the boat, and after a year of use it still holds the hatch closed in rough water and the rubber has not deteriorated.
by:
Perfect replacement for my rotted out, broken rubber bumper door holder! Highly recommend etrailer products; great prices and quuck shipping, too!
by:
We utilize these bump stops on a bar that is utilized 12 - 16 times a day, the product is robust and temperature doesn't seem to affect its performance. I would recommend these for anyone looking for a great retainer where quality and durability are in high demand.
by:
I am very please with this company . AS a business own I know first hand how important it is to make sure your customers are well taking care of . These guys did just that . One of the items was missing from my order with out hesitation they shipped it out the very next day. All the parts I ordered worked very well shipping was very fast. Thanks guys
by:
CHECK FOR PHOTOS
The trailer door holder worked perfect for our application. These were actually used to hold open shed doors. I have attached the picture of them mounted to our doors.
by:
I needed these for a horse trailer and thought I’d have a hard time finding them. I went trailer.com and within a few minutes found them! Fast shipping and exactly what I needed!
by:
These bumpers provided a direct replacement for use on the rear doors of our horse trailer. It'll be nice to again be able to keep the doors held open when desired.
by:
This was my second order from ETrailer. Product was as described, good quality and delivered on time, like last time.
by:
it's definitely what I ordered; haven't attached to the trailer yet, but I'm sure it'll work fine.
Shipping was quick....thanks!!
by:
Perfect replacement and quick shipping
by:
Thanks for the follow up making sure I received my order and on top of emails along the way I have not opened any of it yet but I am sure it will be right for I have ordered other stuff and it’s always been correct and very good products. Thank you to your whole staff for always being committed to quality service.
by:
Perfect replacement for my old door bumpers
by:
This was a replacement on our horse trailer. Identical to the original so it fit perfectly
by:
Insattled these on our horse trailer. Look and perform awesome!
by:
Just what I was looking for! Fast shipment, highly recommend etrailer!
by:
This is perfect. The original one was getting loose and eventually the screw came out. This new one is exactly what we need. Thank you for the fast deliver and a good replacement product.
Michael profile picture

Michael

9/10/2023

After a year, the door holder is still working like new. Thanks for the quality product.

25
99
true
Show More Reviews

See what our Experts say about this JR Products Trailer Door Holders

  • Recommended Door Latch For Passive Door On Interstate Cargo Trailer
    For the passive door, you can add the Cam-Action Lockable Door Latch Kit w/ Narrow Hasp for Small Enclosed Trailers - Zinc-Plated Steel # 383200 to keep that side door locked while the other is open. This will keep your door from catching the wind and opening. Another option I recommend is for the interior of the door using the Bolt-On Zinc Spring Latch # SL716 on the top and bottom of the door like pins in a traditional french door except on the interior. If you want to hold the other...
    view full answer...
  • Can You Use Tape To Attach Bumper Style Door Holders To Glass Entry Doors
    Since the bumper on the Low-Profile Bumper Door Holder for RV or Enclosed Trailer # 37210665 is going to pop into the holder and require you to pull the two apart using other means to hold them to your glass door will most likely not be enough to hold it. Instead I recommend using the T-Style Hook and Keeper Door Holder for RV or Enclosed Trailer # 37210324 so you can use some tape like # 344270341411-1, or any other brand you trust. This style door holder won't require you to pull the...
    view full answer...

Do you have a question about this Trailer Door Holder?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Kathleen M
Installed by:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Written by:
Mike S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.