Camco Replacement Lid for Ventline and Elixir RV Roof Vents - Polycarbonate - White

Part Number: CAM40161

134 Reviews | 17 Questions

In Stock

$38.15

Retail:$55.13

You Save: 31%

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

camco rv vents and fans roof vent cam40161

camco rv vents and fans roof vent plastic cam40161

camco rv vents and fans replacement lid cam40161

camco rv vents and fans plastic cam40161

Show All (7) Product Images

Show Fewer Product Images

Customer Photos

Camco Replacement Lid for Ventline and Elixir RV Roof Vents - Polycarbonate - White customer photo

Show All (2) Customer Images

Show Fewer Customer Images

Videos

Camco Replacement Lid for Ventline and Elixir RV Roof Vents: The Breakdown

Show All (1) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Replacement lid fits your Ventline or Elixir RV roof vent. Durable polycarbonate is virtually unbreakable. The translucent white lid lets some light through. Integrated, rust-resistant mounting brackets included. Great Prices for the best rv vents and fans from Camco. Camco Replacement Lid for Ventline and Elixir RV Roof Vents - Polycarbonate - White part number CAM40161 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

Camco RV Vents and Fans - CAM40161

Highlights

Swap out cracked or leaky lids fast: Preassembled for quick, easy installation.
Get long-lasting protection: Virtually unbreakable polycarbonate won’t crack over time.
Let in natural light: Translucent white lid allows soft light through while keeping rain out.
Avoid rust issues: Integrated, rust-resistant mounting brackets hold up in weather.
Match your hinge setup: Fits continuous metal hinge on Ventline (pre-2008) and Elixir (post-1994).
Trust a lasting solution: Fits 14"x14" vents and comes with a lifetime warranty.

Features to know about

Tough Protection That Lasts: Virtually Unbreakable Polycarbonate Lid

This replacement lid is built from durable polycarbonate that’s virtually unbreakable, so it won’t crack or wear out from sun, wind, or road vibration. It’s made to handle years of exposure without getting brittle, keeping your vent sealed and protected from the elements.

Lets in Natural Light: Translucent White Polycarbonate Keeps It Bright Inside

The translucent white finish softens sunlight while still letting light through, so you get a bright interior without harsh glare. It keeps the space feeling open and comfortable even when the vent is closed.

Reliable Hinge Fit: Works with Continuous Metal Hinge on Ventline and Elixir Vents

Fitting the right hinge style makes all the difference. This lid is designed for Ventline vents from before 2008 and Elixir vents from after 1994, using a continuous metal hinge for a solid, smooth opening motion that won’t loosen over time.

Quick to Install and Ready to Go: Preassembled with Rust-Resistant Mounting Brackets

You don’t have to fuss with separate parts or tools. The lid comes preassembled with integrated, rust-resistant mounting brackets, so it drops in fast and stays secure. It fits a 14" x 14" Ventline vent (pre-2008) or Elixir vent (post-1994) and carries a lifetime warranty for added peace of mind.

Specs

Compatibility

Fits: 14" x 14" Ventline vent, pre-2008, and Elixir vent, post-1994

Warranty

Lifetime warranty

40161 Camco Polycarbonate Replacement Lid for Pre-2008 Ventline Roof Vent and Post-1994 Elixir Roof Vent for Motor Homes and Enclosed Trailers - White

Video of Camco Replacement Lid for Ventline and Elixir RV Roof Vents - Polycarbonate - White

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Demo Camco RV Vents and Fans CAM40161

Camco Replacement Lid for Ventline and Elixir RV Roof Vents: The Breakdown

Video Transcript for Camco Replacement Lid for Ventline and Elixir RV Roof Vents: The Breakdown

Today we're going to take a look at the Camco White Replacement Non-Powered Roof Vent Cover for Ventline and Elixir RV roof vents. Now this replacement lid will fit the fourteen inch by fourteen inch Ventline RV roof vent prior to 2008, and the Elixir RV roof vent after 1994. This vent is virtually unbreakable polycarbonate material. It won't crack over time. It is translucent, white color. It'll let some light through.

It is also UV stabilized. As you can see, it is pre-assembled for for quick, easy installation. It has the integrated rust-resistant, galvanized mounting brackets already installed. If you noticed int eh polycarbonate material, there's a nice center reinforced center bar right here for added strength and stability, makes it very strong. I'll give you a few dimensions on this. It's going to be fourteen and three quarters by fourteen and three quarters.

The overall heighth, you're going to be looking at right at two and three quarter inches tall. That should do it for the review on the Camco White Replacement Non-Powered Roof Vent Cover for the Ventline and Elixir RV Roof Vents.

Customer Satisfaction Score:

93% were satisfied with this product

7% of customers were not satisfied

Wrong item was ordered
Did not arrive in time

7% of customers were not satisfied

Wrong item was ordered
Did not arrive in time

4.9

134 reviews

5 Stars		(121)
4 Stars		(10)
3 Stars		(2)
2 Stars		(0)
1 Star		(1)

by: Dennis Van 09/28/2026

Seems much sturdier than the polypropolene its replacing!

by: Carmen 10/29/2018

Roof vent arrived about a week earlier than expected and was packaged well to prevent damage. The part felt much sturdier than the original equipment vent that it replaced. Installation was quick and easy after watching the video.very pleased with the part and etrailer.

Click to Enlarge

by: Roger S. 07/20/2018

These replacement lids are well made, strong, and easy to install. The directions that are printed on the box were most helpful. The vent lids that were on the trailer got smashed by a falling limb from a tree near where it was parked. The web site was very helpful in helping determine the kind of hinge that is on the vents on the trailer.

Roger S. One Year Later

8/7/2019

The vent lids are still holding up very well.

by: Jon J. 10/21/2017

Only thing I regret is I forgot to take pictures!,
Otherwise, from ordering to tracking info to order follow-up, etrailer has been one of the best most thought out websites I've visited.
The covers I bought are far superior to the original equipment. They arrived well-packaged, in a timely manner, and I got regular updates as my order made it's way to my door.
I installed one of my roof vents tonight as soon as I opened the package, and since I watched the video etrailer provided on their website, I knew exactly how to install it. The only pain was that the trailer manufacturer got the hinge of the original vent filled with sealant when they sealed the vent upon installation. It took some careful work with a razor knife to free it and remove it. By the time I actually removed it, all the plastic of the original vent basically crumbled in my hands as I worked on it..
I still have another one to install, so I will take pics, and post again.

All in all, I'm absolutely satisfied and impressed with etrailer.com, and super satisfied with the products I purchased.

Good job, guys. You are a quality act, absolutely.
Thank-you.

by: David 11/09/2018

This product is a vast improvement over the stock version standard on the trailer. Very solid lid.

Installation of this lid was very easy and straight forward. For those other DIYs out there, this is a multi step process. There’s resources on YouTube and Etrailer re: the installation process.

David M. Arizona

by: Paul G. 11/09/2017

This replacement lid is SO much more heavy-duty than the flimsy original one (the standard plastic) that was on my trailer vent. I was not sure which lid to go with, (old lid self-destructed, no markings on the vent itself) but a search for how to identify a replacement lid led to a helpful article/discussion on etrailer about checking the vent size and hinge type. Just what I needed. I was able to identify the right one, and selected the polycarbonate replacement lid with the center ridge (more rigidity and stability when traveling down the road). Fit as good as original, seals well, very sturdy. Doesn't vibrate or flap around at highway speeds (like the original lid did). Should last a long time. Thanks etrailer!

by: Walt 07/23/2016

I could not find an exact match for my 2011 Livin' Lite VRV trailer's vent lids, but chose these covers due to the Lifetime Guarantee and the unbreakable claim of the polycarbonate material of construction. The continuous hinge design turned out to be a very good match to my existing vents. The metal strut that is used as a track for the crank arm would have worked as delivered, however, it seemed to work better when rotated 180 degrees about its long axis. This is due to the orientation of the crank arm on my oem vents and the U-clip that fits on the end of the crank arm. It is attached by two aluminum rivets, so not a difficult modification. I am very happy with the result.

by: John 07/18/2018

The new White CAM40161 Polycarbonate Roof Vent was the perfect replacement for
the original roof vent on my 2004 HaulMark Race Tailer. The original piece was not Polycarbonate and I am actually surprised it lasted 14 years. The new POLY vent cover should last longer than that. Don't know if I will though.
It only took me about 15 min. to replace it, easy-sqeezy.

by: Cynthia 11/02/2017

Exactly the right replacement for my trailer vent. From the nicely organized website which made it easy to identify the right part, to the fast shipping, to good directions for installation, to quick, easy installation, could not be happier.

by: Patrick 04/21/2018

These covers seem to be well made and much sturdier than the cheesy ones that they replaced. The other standard units (Ventline, S107-311646) degraded after one year of use and some hail totally obliterated them. Don't waste your money on the $15 cheapos. I expect these units will hold up much better.

The slider rail on these was a bit different than the Ventline units. It was L shaped will the other were straight. Made getting the slider clip a bit harder to secure, but that's OK.

by: Veredale 09/30/2018 One Year Later

I bought these because they are made from a different plastic from most, my stock vents were toast after 5yr cause I dont have a cover for my trailer, these vents are holding up very well and look like they will outlast my old ones

by: Kevin 12/09/2019

Perfect replacement for my Pace Trailer vents.
Appear to be much better quality than the OEM vent lids.

by: Joy 05/03/2019

We received our replacement fan vent cover quickly and it fit perfectly. The service and the product were A+++++.

by: Alan J. 09/20/2017

I'm very pleased with the polycarbonate covers that I recently purchased. They are a perfect fit to Ventline lids on my old Caribou, and easy to install. I'm looking forward to leak-free adventures!

by: Loren C 09/15/2016

I couldn't find any manufacturer info on my damaged roof vents, so I was reduced to comparing pictures of possible replacements. The pictures on this site were quite sufficient to tell me which model I should order. They arrived promptly and they fit perfectly.

by: Mark 07/17/2018 One Year Later

fast service, quick delivery. thanks etrailer!

by: Warren 03/03/2014

Great quality & easy installation.

I won't be on the roof for vent lids again!

by: Tom 06/22/2017

Good sturdy unit. It takes two people to install, one on the roof and one in the RV to operated the crank handle to make the connection to operate. Others no problem.

by: William 04/10/2021 One Year Later

Was an exact replacement. Much more durable then the oem vent on trailer.

by: Robert 09/20/2019

Worked like a champ. Just installed since rain was coming. Looking forward to the unbreakable aspect. Shipping was prompt!

by: Don J. 05/20/2017

I always depend on etrailer for top quality products and support. I'm sure these new vent lids will survive any future hail storm.

by: Tom 12/12/2018 One Year Later

It has worked out very well. Thanks to e-trailer and there group of people. Seems to be of good quality. Highly recommend

by: R. Taylor 07/27/2018

Fit my camper. Was easy to install. fast order fulfillment and shipping. Would buy again.

by: Bob 07/01/2021 One Year Later

After one year, still the same. Easy to install, fits perfectly and is a lot thicker than the original. I still expect this to hold up pretty good given that it bakes in the sun all day long and that’s tough on plastics.

Bob One Year Later

7/4/2022

Just went out and had a look, it still looks like it was new.

by: James 03/07/2018

A perfect fit..super easy install! Fast standard shipping...shipped the same day..great job!

134

true

Show More Reviews

See what our Experts say about this Camco RV Vents and Fans

Do you have a question about this RV Vents and Fan?

Looking To Replace Old Vent Lid On 2006 Horse Trailer
Hello Jeff, thanks for reaching out. I do have an option for you. The vent lid in your picture looks pretty old so we do not have a direct replacement for this, but what you can use is the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335001. This has a universal hinge that fits virtually any standard 14x14 vent. It looks like the lift arm will attach in the same way as the current lid. We also have this lid available in black # MA00-335002 if you prefer that.
view full answer...
Durable Replacement Roof Vent Lid for Forest River Wolf Pup 16 BHS
The critical elements in finding a replacement vent lid are matching the overall size, the position of the lift arm bracket and the style of the hinge. I was unable to find a part number 20X14058A , but we do have some options that will work for you. For a 14 x 14 replacement vent lid with a continuous hinge like what's shown in the photos you kindly provided I'd recommend the Camco Replacement Lid, part # CAM40161. This lid features a continuous hinge like the lid you're replacing, matches...
view full answer...
What is the Most UV Resistant Roof Vent Cover Material
There are three types of materials used in the construction of most roof vent covers which are metal, polypropylene, and polycarbonate. The metal option will be the most UV resistant followed by polycarbonate and polypropylene in that order. For a metal replacement roof vent cover that has a continuous hinge and 14-1/4"x14-1/4" opening, I recommend part # BV0534-00. For a polycarbonate replacement roof vent cover that has a continuous hinge and 14-1/4"x14-1/4" opening, I recommend part...
view full answer...
Replacement Vent Cover For Bathroom Vent On 2007 Jayco Jayflight 26 BTX
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco...
view full answer...
Replacement Vents for a 2012 Forest River Flagstaff Micro Lite Travel Trailer
If you want to replace all the vent assemblies on the trailer then the world is your oyster! The standard roof vent such as # V2092SP-28 fits a 14-1/4 inch square opening. You can use this one or any of the others listed in the link included below to replace the manual vent without a fan. For a basic vent with a 12 volt fan you can use # FV802250 or any of the models listed in the other link I have provided. I have linked a video review of the above-mentioned fan/vent. The skylight though...
view full answer...
Correct Replacement Elixir Roof Vent On a 1995 Northern Light Cab over Camper
It sounds like what you're looking for is the Camco Replacement Lid for Ventline and Elixir RV Roof Vents # CAM40161. This replacement lid will work with your Elixir roof vent on your 1995 Northern Lite, is made from polycarbonate soo it's virtually unbreakable, and is a translucent white color so some light will be able to pass through.
view full answer...
Replacement Vent Cover For 1990 Fleetwood Jamboree 27 Foot RV
Most vent covers are the same standard size of 14x14 inches, but the hinges are not all the same. I've attached an image to help you. There are continuous plastic hinge options like # BVD0449-A01, 4 point hinge options like # CAM40154, 3 point hinge options like # CAM40153, and continuous metal hinges like # CAM40161 you asked about. There are also different color options for you to choose from. I've attached a link to our page for you. If you are looking for a cover for the lid/cover...
view full answer...
Replacement Lid for Elixir RV Roof Vents
The Replacement Lid for Ventline and Elixir RV Roof Vents, # CAM40161 is for a translucent white color lets some light through and has a slight pyramid shape to it. For a slightly different shape but with the same translucent white color, select # CAM40155 and for a replacement lid for Elixir RV roof vents in a smoke color, # CAM40148. These are all listed as proper replacement lid options for post-1994 Elixir roof vents. If you have issues with the hinge, you can use the MaxxAir UniMaxx...
view full answer...
Vent Cover Recommendation for a Trailer with an Older Elixir Vent
Most likely you either need the part # 63116 that you referenced or the part # CAM40161. Both use the same continuous metal lip for a hinge but the difference is that the # 63116 that you referenced has two square protrusions on the top of the lid. See pic. Your best option will be to compare the product pictures of either of the covers I referenced and go with the one that matches yours. Sounds like you could be looking for a piano style hinge like the part # SH300 that is one piece...
view full answer...
Replacement 14 x 14 Inch Vent Lid with Continuous Hinge
You will want to look at the size and the hinge style when looking for a replacement vent lid. There are different styles of a continuous hinge. If you can snap a pic of the existing hinge on the vent or lid and email that to me I can point out the lids that match. Basically there is the style seen on lid # BVD0449-A03 which is all plastic and has 3 openings in it.
view full answer...
Polycarbonate Vent Cover Recommendation with Continuous Hinge
The Hengs lids we offer do not have continuous metal hinges but we do have a few that do have that hinge style like the # CAM40161 which is a white polycarbonate lid.
view full answer...
Replacement Trailer Roof Vent Cover for an Elixir Vent Made in 2002
Replacement vent cover # CAM40148 should be correct since it fits Elixir vents made after 1994. Take a look at the video I have linked on this cover. Make sure the hinge style matches your old covers. It is also available in white, # CAM40155 or # CAM40161.
view full answer...
Replacement Lid for Elixir RV Roof Vent
We carry replacement lids for Elixir RV Roof Vents that have the appropriate hinge, which is what I believe you are asking about; the hinge on these lids are not available as a separate entity, however. The replacement lid for your roof vent will be either: - Replacement Lid for Elixir RV Roof Vent # CAM40156, which fits Elixir RV roof vents from before 1994 - Replacement Lid for Elixir RV Roof Vents # CAM40161, which fits Elixir RV roof vents from after 1994 I have added links to video...
view full answer...
Replacement Roof Vent Lid and Operator For a Ventline/Elixar Roof Vent
You will need the Camco Replacement Lid # CAM40161 as you have a Ventline/Elixar hinge on your roof currently. The Replacement Operator w/ Knob and Screw for Ventline Vent # BV0115-04 can be used to open and close the lid if your is damaged.
view full answer...
Replacement Trailer Roof Vent Lid for 14 x 14 Vent on Heartland Northtrail 5th Wheel
The key to picking out a replacement lid for a standard 14 x 14-inch trailer roof vent is matching the hinge type. Trailer makers typically don't keep track of smaller items like vents that are used in fabrication of their trailers so you can refer to the photo I linked for you that shows the 4 vent lid hinge types common on RVs. Simply click on the linked page for all vent lids and select your hinge style and preferred color. The Camco lid # CAM40161 that you referenced has a continuous...
view full answer...
Higher Quality Roof Vent Covers for my Forest River Motorhome With Heng 122112 Roof Vents
Yes by using the Replacement Lid for Ventline and Elixir RV Roof Vents part # CAM40161 you will be getting away from the polypropylene type of covers that comes standard and upgrade to the poly carbonate type. This would be my choice over aluminum as well simply for the noise factor during storms. I've linked the product page and video for you below. Happy travels!
view full answer...
Recommended Lid/Cover for MaxxAir Elixir RV Roof Vent
The Replacement Lid for Ventline and Elixir RV Roof Vents part # CAM40161 measures 14-3/4" x 14-3/4" when measuring from the outside of each edge. I have attached a review video for you with these dimensions. That said, the Replacement Lid for Ventline and Elixir RV Roof Vent is designed to replace a lid not cover the actual lid. If you are instead looking for a cover we have the MaxxAir Standard RV and Trailer Roof Vent Cover part # MA00-933066 which would fit over a MaxxAir Elixir Vent...
view full answer...

Do you have a question about this RV Vents and Fan?

Info for this part was:

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

Adam R

Installed by:

Jeff D

Updated by:

Adele M

Updated by:

Carrie F

Written by:

Rachelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.