Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
Item # C13704
Retail:$642.95
Our Price: $383.94
You Save: $259.01
Confirmed to Fit
2022 Entegra Coach Vision Motorhome
26X
27A
29F
29S
31V
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (61)
- Q & A (0)
- Photos
2022 Entegra Coach Vision Motorhome - Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
- Frame Mount Hitch
- 22 - 66 Inch Wide Frame
- Bolt-On
- 2 Inch Hitch
- CURT
Adjustable trailer receiver hitch designed for use on RVs that can be bolted to the Entegra Coach Vision Motorhome frame. Powder coated steel is sturdy and corrosion resistant.
Features:
- Universal hitch designed for use on RVs and motorhomes
- Heavy-duty side brackets allow for maximum adjustability
- Slide along hitch body to match the width of your vehicle frame
- Work on box frame, C-channel frame, or I-beam frame
- Let you position tube mounts toward the front or rear, putting the hitch body in the best location for clearance
- Hardware included
- High-gloss black powder coat finish resists rust, corrosion, and is resistant to scratches and UV damage
- Strong, secure all-frame attachment
- Solid construction for maximum strength and safety
- Not for use with a weight distribution system
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum tongue weight: 500 lbs
- Fits RV frame width:
- Minimum: 22"
- Maximum: 66"
- Overall width of hitch: 68-1/2"
- Overall length of receiver tube including crossbar: 11"
- Distance from front of crossbar to front of receiver tube: 8-3/16"
- Limited lifetime warranty
Notes: The main hitch body tube can be trimmed so the ends are flush with the frame brackets. After trimming, coat the bare metal with paint to protect against rust and corrosion.
13704 Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide
Installation Details
Tech Tip
Drilling required for installation
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Too difficult to install
Customer Reviews
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide - C13704
Average Customer Rating: 4.7 out of 5 stars (61 Customer Reviews)
Adjustable trailer receiver hitch designed for use on RVs that can be bolted to the vehicle frame. Powder coated steel is sturdy and corrosion resistant.by: Dave03/21/2023
When I received the trailer hitch I had ordered the carton had large hole in it. On inspection of the content I found that the hardware was missing. This was a UPS delivery. I took pictures of the package and called etrailer customer service. They immediately took action and sent a replacement package to me. They offered any assistance I might need for the installation of the hitch.
The installation went well and I now have a good quality hitch on my RV.
by: Marc M09/11/2020
Very well constructed, heavy duty hitch. I installed this on the back of my Arctic Fox 29-5T 5th wheel, in order to haul my generator on it. I had to add some 2" square steel stock as spacers to lower it enough to clear hard parts on the trailer. Only negative is the requirement for some odd sized, large drill bits.
Marc M.
9/12/2021
High quality product that performs its task without any issues.
by: William07/15/2023
The site says this does not fit but it works perfect for my application it mounted to the main frame rail towards the front and the other part of the fame to the back. my goal is for my bike rack and not to pull anything else.
by: Jeff 04/13/2024
Installation was super easy and has performed perfectly for pulling my 18' boat. Definitely a cost effective alternative to having a hitch welded into place.
by: Pat11/08/2022
This was great for what I needed, which was to pull my kayak trailer behind my 5th Wheel. It was a simple install. I installed it by myself, but it would have been easier with two people. I have made two cross country trips with no issues. With a small trailer and a 35' 5th Wheel, I cannot see the trailer at all, except for the shadow if the sun is right.
Pat
11/9/2023
I have changed from a light kayak trailer to a slightly heavier 12X6 enclosed trailer. It pulls great, but I do feel a little movement when I get passed by larger vehicles, similar to what if feels like with towing a bumper pull RV. It is not bad, but it is noticeable. I still highly recommend the hitch, it seems to be working without any issues.
Mike L.
11/16/2023
@Pat We're glad its working well for you!
by: Richard 04/27/2024
Worked great! Fit on our 1972 Airstream.
by: Bryan11/02/2021
1976 Ford Ranchero
The high quality, flexibility of a universal part, adaptability and ease of fabrication as well as installation made this product very user friendly. Also, a BIG thank you to Danielle in customer service (ext. 79394) who researched and looked until she found just what I was looking for from the shelf. Nice work ! As you look below at Warhawk, take note that this is the Hot Rod the hitch will be attached to...for the long haul.
by: Frederick05/19/2021
Curt's adjustable trailer hitch receiver worked as planned. I was looking for a hitch receiver that would be able to carry the 75 lb. weight of our double recumbent trike carrier. The camper bumper has a low weight rating and I wouldn't trust it to hold the carrier weight over the long term. I mounted the hitch assembly by both bolting it through the bottom of the camper frame and also welding side plates between the hitch assembly and camper frame. I also welded a plate between the receiver tongue and rear camper frame to minimize receiver flex. These additional plates should allow us to safely carry our two recumbent etrikes on the carrier if needed in an emergency. Total weight including carrier would be 175 – 200 lbs. Currently we carry the etrikes inside the camper on a custom rack.
by: Judd R.10/28/2020
Installed the hitch in less than a day. I bolted it to the trailer frame. I have a rack on it for carrying a generator.
Judd R.
10/28/2021
The hitch is strong and durable. It does not loosen when traveling and easily holds a generator.
by: Javari04/21/2022
Great Experience! I needed to find a hitch that could carry a bike rack on the back of a travel trailer. E-trailer very informative about finding the correct hitch. It arrived very quickly & the staff are great about following up on the progress of the order. The installation instructions were very clear to follow.
by: Raymond 05/08/2024
Very well built and excellent quality. Would recommend and buy again.
by: David04/11/2022
I ordered a 66” adjustable hitch for the back of my Keystone fifth wheel. With fuel prices high, I want to pull another trailer for my side by side. It arrived in just two days. I had to weld it to my frame because of the way the back stabilizer jacks were but I think it will work great.
by: John06/04/2020
Excellent proactive customer service. I wish all my online purchase experiences were with etrailer.com as they have superior merchandise at reasonable prices and they follow that up with outstanding customer service. I'm elated how my hitch mounted on my camper.
by: Rod 05/11/2024
Great service
by: Joseph02/27/2020
Just received this for my 18' Travel Trailer and the build on this item is really strong and heavy. I have not installed it yet but it is straight forward and looks quite simple.
I would definitely recommend this to my friends.
Also shipping was extremely fast and i have been using etrailer for better than 10 years now as they never let me down.
All heavy duty hardware is included which is not in the picture
by: Paul05/10/2023
The box arrived with only minor damage to the cardboard. The frame was able to move around alot which caused some damage to the cardboard. The bag of fasteners was intact but not secured. The installation of the hitch receiver was relatively straight forward. Drilling upward to attach the brackets was very challenging. Not much room to push a drill bit into the metal channels.
I feel more is needed to secure the 60 pound hitch frame to the box.
by: Chris03/31/2023
Install hardware not packaged appropriately. All of the nuts, bolts and washers were not in a sealed package inside the shipping box. Some of the install hardware fell out of the box through small holes in the box. When notified of the missing hardware, I was sent the wrong replacement hardware. When notified of the incorrect replacement hardware, I was told to find replacement hardware at a local hardware store, which I had already done, but nobody carries that big of size of grade 8 washers. Still waiting for a resolution. In the meantime, I've had to cancel a trip to Moab this weekend because we can't pull our side by side without this hitch installed and we've lost out nonrefundable deposit on our RV pad. This whole ordeal has cost us in excess of $1500. Do yourselves a favor and just take your rig to a professional installer and pay their fees. Nothing is worth the cost of the headache I've gone through trying to save a dime through eTrailer!
by: James 03/17/2023
Chevrolet Volt
Like so many other people, we have recently acquired E bikes. Our RV isn’t very large. It is an R-Pod RP202.. I debated, trying to find a way to store the ebikes inside the RV, but realized we would be tripping over themconstantly, I bought a great bike rack for our car that is rated for RV use. It is the Hyperax 2023 VOLT RV and it works great on our Audi Q8 tow vehicle. So that got me thinking of trying to install a hitch on our our pod. After carefully considering various universal, RV hitches, I decided to go with the Curt model 13704 which is rated 5000/500lbs capacity. I had to drill four 1/2”holes in the I-beam frame and four 9/16”holes in the hitch cross beam. The hitch was the perfect with four of the R -Pod RP202 and should have no problem carrying the weight of our two 60 pound e-bikes. E-trailer provided excellent support both before and after I ordered the hitch from them. I alsoneeded to remove the rear stabilizer jacks and relocate them to just forward of the hitch brackets.
by: Douglas02/21/2023
Ford Transit Connect
Buyer be aware! Obviously, this product is heavy, thus etrailer should have that in mind when packing the product. The first hitch they sent out - the "packer" threw all the pieces in a box and shipped it. While in transit the bag of parts, I assume, went flying out of the box because I received 12/27 pieces of the parts. The two smaller parts were left unsecured to anything and scratched and dented the main hitch.
Called the company to try to rectify the situation. They offered to send a new hitch and have UPS pick up the old one. Fast forward to the new hitch being delivered. This time they did secure the loose pieces to the main hitch, however, did not make any attempt to limit metal on metal rubbing. The second hitch has powder coat missing and one large dent in the main hitch.
Called customer service to try to rectify this issue, again. Their solution was to credit me $20 so I could go buy paint to coat over the issues or wait around until they send another hitch out. I do not have time to wait around for them to send another hitch - much less think they would actually care enough to package something like to so no damage would occur. Beyond disappointing that this is how etrailer choose to handle the situation - not to mention reading through some of the other comments they have had the same problem previously - again it seems etrailer does not care enough about their customers and the products they purchase especially ones that cost this much.
by: Dean 05/11/2023
The hitch got here very fast, which was greatly appreciated. Very helpful customer service. I talked to customer service numerous times and every time they were able to answer. Every question I had I would Highly recommend E trailer for anybody looking to buy a hitch
by: Gregory09/22/2022
First off you need to rethink your packaging!!
All the hardware blew out of its bag therefore made its way out of the corner of the box by way of a hole made by one of the 2 nuts, 2 bolts and 3 large washers that were missing! The brass staples didnt hold the box together at the end where the holes were!! So they were forgotten or lost in shipping!
Brooke M.
10/6/2022
Thank you for letting us know about this - we definitely want you to have all the parts that should have come with the order. I have already sent your information to our customer service team and they will be in touch with you soon.
by: Joel 02/04/2023
0 0
The first time I ordered the box was empty from UPS. E trailer said no problem and resent a new order right away. Great service!
by: Lora04/29/2023
Just what we needed. Got here fast too! Thank you etrailer
by: Joey H04/15/2020
2019 Honda Passport
Installed this on my 2019 Keystone Passport 2670BH for pulling a second trailer and it works perfectly. I did have to purchase a drawbar with a longer receiver so the trailer would clear the stock bumper on the camper. My campers bumper mounts wouldn't let me move the hitch further back and I didn't want to remove the stock bumper. Works great though. Very strong.
by: Raymond10/29/2018
As is typical of Curt products, this is extremely well built. Very clean painted finish. It might be a little challenging to drill the 5/8 holes for the mounting brackets as the the tubing is quite thick. I did it on a milling machine- a good drill press will work also. Otherwise, take your time and use a series of small drills to step up to the 5/8" I actually used a 21/32 as that is what it appears Curt puts in the mating part. This was overkill for my application. I put it on a Keystone Fuzion 371 Toy hauler. I have a pit bike and two beach cruisers. The mounting plate on the hauler is not designed for the full load of this hitch, but my intent is just for the bike rack.
25
61
Show More Reviews
See what our Experts say about this CURT RV and Camper Hitch
- Higher Capacity Trailer Hitch Recommendation for 2013 Keystone Montana Hickory 3100RLFor your 2013 Keystone Montana Hickory 3100RL the best option for a hitch that has a 500 lb tongue weight capacity is the Curt Multi Fit Hitch part # C13704 which fits standard RV frame styles that are between 22 and 66 inches measured from outside to outside.
view full answer... - How to Determine if Trailer Hitch Can be Installed on 5th Wheel TrailerThere are only universal fits for trailer hitches that fit on trailers like the Crossroads Cruiser 5th wheel trailer you referenced, as they are custom fits, but I can tell you how to determine if one will fit. What you need to know is if you will be using a frame-mount or, if that's not accessible, a bumper mount, and I'll give you a couple of examples. The bumper-mounted hitches are the easiest to determine as you just need to know the size of your bumper. The Curt RV Bumper 2" Trailer...
view full answer... - Recommended Trailer Hitch Receiver for 2017 Forest River 2380 FTD to Flat Tow Chevy SparkFor a motorhome, you won't use a custom fit hitch receiver. Instead you will use an RV hitch receiver. I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704. This hitch is rated to pull the Chevy Spark without any issue and no extension is necessary.
view full answer... - Recommended Hitch for Travel Trailer With 68-1/2 Inch Outside to Outside Spaced Frame MembersThe Curt # C13704 fits frame members with an outside dimension up to 66 inches long, so it wouldn't be compatible with your 68-1/2 inch outside to outside frame spread. You'll want to use the other hitch you mentioned, the Curt # 13703 which fits frame members up to 72 inches wide which would work great on your travel trailer. The hitch would be compatible with the frame member you described. The hitch would work okay for towing a small boat as long as it doesn't exceed the 3500 lb towing/350...
view full answer... - 2 Hitch Reciever for 2019 Grand Design Imagine 2600RB Trailer to hold 300 Pound ScooterThe Curt # C13702 RV & Camper Hitch is suitable for camper frames measuring from 18" to 51" in width and can be bolted on or welded on. It features heavy duty adjustalbe side brackets anda black powder coat finish that will resist rust. If you need something that will adjust wider then the Curt # C13704 hitch that adjusts from 22" to 66" is the way to go. I have attached links to each of these products and a review video. For a motorcycle carrier you could use the etrailer # E98873 Carrier....
view full answer... - Recommended Trailer Hitch Receiver for the 2016 Ford E-350 CutawayFor your 2016 Ford E-350 Cutaway there is not a custom fit trailer hitch receiver. However, that doesn't mean there isn't a fit. I recommend using the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704. I've attached a video to assist.
view full answer... - Bike Rack Recommendation for Carrying 3 Bikes While Towing Popup CamperWhat I recommend doing is installing a hitch on your popup, like the Curt Adjustable Hitch 22" to 66" Hitch # C13704, and then using the Thule Range 4 Bike RV Rack # TH9057 which has been rated and approved for use on a towable trailer hitch receiver. Not every rack is rated for the extra movement at the back of a trailer and the nice thing is this is a solid bike rack and I wouldn't have an issue recommending it even if it wasn't the only one that would work for this application. Please...
view full answer... - Recommended Trailer Hitch Receiver for 2020 Ford Transit 350HD Service BodyThere is not a custom fit option for your 2020 Ford Transit 350 Cutaway Cab and Chassis. My recommendation for your trailer hitch is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41991-07.
view full answer... - Aluminum Cargo Carrier Compatibility With 2017 R-Pod Travel TrailerWe have a couple of aluminum storage components but they are not foldable. The Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Aluminum - 125 lbs # MNT77FR or 250 lbs # MNT67FR. Your other option is to use a RV trailer hitch receiver like # C13704 and then the Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch # FHG77ZR. If you want the bumper mounted fold down storage, we only have the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage...
view full answer... - Recommended Trailer Hitch Receiver For A 2020 Forest River Salem FSX 280RT Toy HaulerFirst you'll need to measure the frame width of your 2020 Forest River Salem FSX 280RT toy hauler. Once you know that you can choose the correct size receiver hitch. The Curt Adjustable Width Trailer Hitch Receiver for RVs # C13704 is compatible with frame widths of 22" to 66" and has a GTW of 5000lbs and TW of 500lbs. if you have a frame width larger than 66" you can use the Curt Adjustable Width Trailer Hitch Receiver for RVs # 13703 which is compatible with frame widths of 22" to 72"...
view full answer... - Heavy Duty Adjustable Receiver Hitch for my 2020 Vanleigh Vilano CamperWe have exactly what you need! The Adjustable Width Trailer Hitch Receiver for RVs part # C13704 gives you the 500 lb. weight rating you are looking for and gives you an adjustable range of 22" to 66" Wide RV Frame widths. This will include all of the hardware you will need to do the installation. Check out the link and video on it below. Happy Camping!
view full answer... - Hitch Recommendations For A 2021 Keystone Sprinter 3530DEN 5th Wheel Trailer Most bumpers on campers/RVs are not reinforced enough to handle any towing weight. The Curt RV Bumper Hitch - 2" Item # C19101 would definitely bolt on but that kind of weight would most likely rip your bumper off. I recommend using the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" Item # C13701 as it has a 500lbs weight capacity. If the distance between your frame is larger than 51" then the Adjustable Width Trailer Hitch Receiver for RVs, 22" to...
view full answer... - 2006 Freightliner FRED RV Chassis Replacement Trailer Hitch OptionsFor your application you'll need to use one of our universal RV trailer hitches like the Curt Hitch # C13704. This fits by bolting or welding it to the frame of the vehicle and is compatible with frames that are 22" - 66" wide. Attached is a review video and installation instructions for you to check out. If this doesn't match up with the width of your frame please let me know what your frame measures and I'd be more than happy to help you find a solution from the linked selection.
view full answer... - Best Solution for Carrying E-Bike on a Travel Trailer Using a Carrier with a RampI do have a couple of solutions for you but you do have a very unique situation so there isn't a perfect solution that is able to address all of your concerns. The best solution is to install a trailer hitch like the Adjustable Width Trailer Hitch Receiver # C13704 (which fits frames from 22" to 68-1/2" wide) on your travel trailer and then use the Ultra-Fab Dirt Bike Carrier # UF48-979033 to carry your bike. Since this has a ramp (like the EasyFold XT #TH903202) it will help make loading...
view full answer...
- Suggestion On How To Carry Two E-Bikes And Two Kayaks With A 2010 Toyota Tundra And A Pop-Up TrailerFor your 2010 Toyota Tundra with your 2008 Coleman Niagra Pop-Up Camper, I recommend using a roof mounted kayak rack on your Toyota Tundra to haul your 2 12' Hobie Passport Kayaks, and transport your two e-bikes at the rear of your trailer. For a roof mounted kayak rack, I recommend the Thule Stacker # TH830, which can accommodate up to 4 kayaks, and a total capacity of 75-lbs. For a trailer hitch for your 2008 Coleman Niagra, I recommend the Curt Adjustable Trailer Hitch Receiver #...
view full answer... - What 2" Universal RV Hitch do You Recommend for My Trailer? I have a great alternative option for you. While we do not carry a Putnam hitch 81212, we do have universal hitches that are compatible with RVs. For that route, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704. Not only does this hitch provide you with 500 pounds of maximum tongue weight capacity and 5,000 pounds of maximum gross towing capacity, it also comes with a superior gloss outer coat over the base powder coat that provides better resistance...
view full answer... - What Cargo Carrier with Ramp do You Recommend for Transporting My Trike on My Motorhome?I have a great solution for you. I recommend the 30x50 Flint Hill Goods Cargo Carrier w/ 48" Ramp - 2" Hitches # FHG77ZR. This carrier provides the interior dimensions you need as well as an integrated ramp. Also, you will need to attach some ratcheting straps to secure your trike like the Erickson # 34413. For theft deterrence, I recommend the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" # 63232. If you need a hitch receiver for your 2008 Tiffin Allegro, I recommend...
view full answer... - Trailer Hitch Recommendation that Fits Trailer Frame width of 72 inchesThe only multi-fit hitch available that can fit your frame width is the Curt # 13703 that you mentioned which has a frame width range of 22 to 72 inches measure from outside to outside. The capacities of this hitch is 3,500 lb trailer weight and 350 lbs tongue weight.
view full answer... - Fitment of Adjustable Width Trailer Hitch Receiver for RVsThe Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide, # C13704 has brackets that will mount to the bottom of the frame. The square tubing sets within these brackets which extend toward the inside of the frame. If you have a measurement of 68.5" from outside to outside, this will fit. See attached mounting instructions, image shows fitment.
view full answer... - Recommended Trailer Hitch for 2017 Thor Axis Class A MotorhomeI have a solution for you, but in order to determine which hitch will fit on your 2017 Thor Axis Motorhome you will need to measure the distance between the frame stanchions to determine the best choice. If you've got between 22" and 66" width and either a box frame, C-channel frame, or I-beam frame you can use the Adjustable Width Trailer Hitch # C13704. This hitch can be bolted on to the frame with the included hardware, so no welding is required for installation. I've also linked our...
view full answer... - Compatibility of Front Mounted Trailer Hitch Receiver on 2004 Workhorse W22 ChassisFor your 2004 Workhorse W22 chassis there isn't a specific custom front mounted hitch receiver. Because of that, I recommend using the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704 if you have the clearance under your frame for that not to disrupt. An adjustable hitch that is bolt on will be easier than a weld on option, but that is also a possibility.
view full answer... - Recommended Cargo Carrier for Rear of CamperWe do indeed have some cargo carrying solutions that will work great for you, but everything we offer would mount using a hitch receiver, not by bolting directly to the bumper. If your camper has a 4 inch square channel bumper, an inexpensive receiver like # E-100 could be used. Another option would be a frame mounted hitch, like # C13701 for frame members 18-51 inches apart or # C13704, for frame members 22-66 inches apart. A frame mounted hitch would provide the strongest installation. Once...
view full answer... - Trailer Hitch that Could Possibly Fit 2011 Forest River Cherokee 235B Plus 4-Way ConnectorAs long as the width of the frame on your 2011 Forest River Cherokee 235B is between 22 and 68-1/2 inches (measured from outsides) the Adjustable Width Trailer Hitch Receiver for RVs # C13704 will fit and work well for you as it has a 5,000 lb trailer weight and 500 lb tongue weight capacity. To add a 4-way what you would need is the part # 18252. This is a 72 inch long 4-way connector that comes with quick-disconnects so that it can easily be attached to a trailer's taillight circuits....
view full answer... - Difference Between Curt Adjustable Trailer Hitches 13703 and 13704The difference between the Curt Adjustable Width Trailer Hitch Receivers # 13703 and # C13704 are a couple things, starting with the # C13704 having a 5,000 lb towing capacity and 500 lb tongue weight capacity while the # 13703 has a a 3,500 lb towing capacity and 350 lb tongue weight capacity. Both fit box frames, C-channel frames, or I-beam frames, though the # C13704 is for frames 22" to 68-1/2" wide while the # 13703 is for 22" to 72" wide frames. The Stabilizing Straps # 18050 which...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jeff D
Video Edited:
Jonathan Y
Installed by:
Cole B
Video by:
Chris R
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Updated by:
Carrie F
Written by:
Kristina F
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave
3/22/2024
Hitch works fine. I did add a U-bolt around the receiver tube and fastened it to the RV bumper to reduce some of the twisting force where the hitch bar connects to the RV frame. We use the hitch to hold a heavy duty bike rack for our E-bikes.