bing tracking image
  1. RV Waste Valves
  2. Valterra
  3. Single Waste Valve - Cable Actuated
  4. 3 Inch Valve Body
  5. Straight Valve
  6. Stationary Valve
Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 72"
Valterra

Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 72"

Part Number: TC372
In Stock
$80.09
Retail:$114.16
You Save: 30%
RV Waste Valves
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Replaces the valve for your black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. 72" Flexible cable lets you install handle where you want it. Valve body, cable, seals, and hardware included. Great Prices for the best rv waste valves from Valterra. Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 72" part number TC372 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (79)
  • Q & A (0)
  • Videos (1)
  • Photos

Valterra RV Waste Valves - TC372

  • Single Waste Valve - Cable Actuated
  • 3 Inch Valve Body
  • Straight Valve
  • Valterra
  • Stationary Valve

Replaces the valve for your black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. 72" Flexible cable lets you install handle where you want it. Valve body, cable, seals, and hardware included.


Features:

  • Replacement valve for your RV's black-water tank
  • 3" Diameter passage allows wastewater to travel freely when valve is open
  • 72" Flexible cable lets you install valve handle where you want it
    • Cable allows valve to be placed in secure location or hard-to-reach place
    • Cable can be cut down to fit your application
    • Inner wire is constructed of stainless steel
  • Valve body, flexible cable, seals, nuts, and bolts included
  • 1-Year warranty


To install, remove the broken waste valve and seals from your holding tank. Then place the included seals on the flange fittings and position the new valve body. Tighten the provided hardware to complete installation.



TC372 Valterra Motorhome Black Water Holding Tank Waste Valve Body with 72" Flexible Cable - 3" Valve





Video of Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 72"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank Review

Today we're going to take a look at the Valtera waste valve body with the 72" long flexible cable extension for your RV black water tank.This is a replacement valve for your RV's black water tank. This will convert your hard to access valve handle to a nice simple push pull placement. The 3" diameter passage right here allows your waste water to travel freely when the valve is open. You can see that'll open the well and that'll close it. Your cable will attach right here to be able to open that valve.The 72" long flexible cable, this is what'll let you install your valve handle where you want it. Cable allows the valve to be placed in a nice secure location, or very easy to reach place.

This cable can be cut down to fit your application. The inner wire on this is constructed of stainless steel.This part will include everything laid out here on the table. The valve body itself, the flexible cable, the cable mounting bracket, the two seals, the nuts and bolts are all included to install it.Basically, to install this, you'll remove the broken waste valve on your RV and then what you'll do. And remove the old seals also. Then you'll take this and place the new valve body in place of that.

Include the new seals. One on each side just like that on the flange fittings. Then position your valve body where it needs be.Then once you get it all installed, and your handle where you want it, use all the hardware and tighten all the hardware down to complete your installation.But that should do it for the review on the Valtera waste valve body with the 72" flexible cable extension for your RV black water tank.

Customer Satisfaction Score:


Customer Reviews

Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 72" - TC372

Average Customer Rating:  4.8 out of 5 stars   (79 Customer Reviews)

Replaces the valve for your black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. 72" Flexible cable lets you install handle where you want it. Valve body, cable, seals, and hardware included.

by:

Great product great service, will be coming back when needed

Bill R. profile picture

Bill R.

10/25/2024

Install working great now for a year



by:

Very quick delivery to Canada. Great communication. Will be installing it on the trailer in a few months. Looks like a quality valve. Exactly as described.



by:

Much easier than crawling under slides to dump tanks.we are seasonal so this was a weekly thing.



by:

Good quality, delivered quickly and on time



by:

The two Valterra TC372 waste valve kits arrived quickly and just as described. I will not be installing them until spring since I live in Michigan, need I say single digits and white stuff on the ground. The current valves work however are very hard to operate. I have another Valterra valve which works perfectly so I decided to upgrade the other two on the black & grey tanks that utilize cables. Thanks again Etrailer.

Charles profile picture

Charles

1/25/2020

Perfect! Easy to install and used all season what an improvement!



by:

This was very easy to setup, worked per fectly

Tracy G. profile picture

Tracy G.

11/1/2023

Worked perfectly, easy to instal



by:

There is nothing more troubling than the black tank spilling every time you take the cap off of the sewer connection. The valve was not installed correctly from the manufacture, with the cable being too long and not supported.
The new valve was a Valera it came
With everything needed to replace the old one. One year later still working well.

Randall W. profile picture

Randall W.

12/31/2020

Great still happy with my purchase



by:

As usual, exactly what I needed and decent delivery speed. Perfect fit for my 5th wheel.



by:

The item arrived on Saturday July 15. The unfortunate part is I ordered it around June 27, it took about a week for it to arrive at wherever they ship it from despite the notice that it was "in stock". Add another week to get here and I installed it the day it arrived. I was about to cancel the order on Monday the 10th and buy one locally when I got the notice it had actually shipped. A bit disappointed in the delays since I am going somewhere with the trailer next week. I would add pictures but who wants to see a black water tank with spider webs all over the place.
After reading the "Not appropriate for a review" list, "Details about ordering, shipping and pricing" makes this not appropriate, that's what you get when asked to write a review. Print it or not. In praise of the product, works great.



by:

Thanks ,works gooood



by:

I ordered a replacement dump valve with cable, for the black water tank on my rv. The valve arrived quickly, and in good condition. I have not yet installed it, but expect it to resolve the problem once installed.

Thanks!



by:

Recieved product in 3 days which was great because dealers wanted twice the money. I was replacing a bristol valve body and cable that had failed. I had to cut the pipe coming into the flange to get the new valve body to fit in the gap. I went to the local hardware store and purchased a 3'' no hub coupler and cut about 1'' off the pipe. After I did that the instalation went really good. The people at etrailer said it would work and it did. the only difference between the bristol and the valterra is the cable but I needed to replace both anyway. It is working great and I would recomend etrailer to anyone



by:

I just received my order this afternoon. Very surprised at the speed with which it was delivered. I am in the process of rebuilding a older5th wheel and the items that were ordered are just perfect for the job.
Thank-you etrailer I will be back



by:

This was an easy way to fix a bad valve. Rather than replacing the whole valve, I was able to just replace the main pieces. Works great so far.



by:

Exact replacement for the two 3" gate valves on my 2015 Keystone High Country. Replacement was straight foward after a GOOD clean-out and GOOD drain. I replaced the cables because one had failed and the valves because they were getting very hard to operate. They also work so much better now since they are routed properly. Delivery was fast and accurate from etrailer with a reasonable price.



by:

The gate in the valve wasn't big enough. You can see light around it. There is no imaginable way it can stop liquid.

Jenny N. profile picture
Etrailer Expert

Jenny N.

9/30/2022

You mentioned that the gate was not big enough and I wanted to see if you have installed it? What did the original valve on your RV measure to?



by:

Product was standard item purchased for routine replacement.
etrailer.com was one (if not the only one) who had the original equipment
replacement. Good service and quick delivery. Two thumbs up!!



by:

Thank you sir



by:

This is a higher Quality valve than the OEM piece which came on my travel trailer. Installation will be done this coming weekend and looks to be low to no hassle.



by:

Quick shipping! The remote control allows me to open/close the waste tank's drain valve that is located on the side opposite of the motor home drain outlet.



by:

I had to make a small modification to attach it to my rig, but it was easy and has worked great in the year since I installed it. It is the easiest pulling valve I have ever used and have never had any problems with it. I would buy another one if needed, I'm even considering getting one for the gray tank just to make it easier to pull.



by:

the valves i ordered with cable pull 72 in. fit and worked great no problem installing. makes life a little better not having to bend under slideout to open drains.



by:

I used to have to stand on my head to open the sewer valve and this solved that problem. The cable is so long that you have to work with it a little to operate but, well worth it.



by:

Excellent service and short delivery time. Package was put in a shipping box that was wrapped so well to protect your item so no damage would occur. Easy to order . I would order items from etrailer again. Good service and reliable.



by:

Fast service repeat customer.


25
79
Show More Reviews

See what our Experts say about this Valterra RV Waste Valves

  • Troubleshooting A LaSalle Bristol Cable Actuated Gate Valve That Isnt Opening The Gate
    Unfortunately LaSalle Bristol completely covers the connection point in plastic so the only way to gain access to gate inside the LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N4BB96GM would be to cut into the plastic for the cord and physically pull the gate up. You'll have to replace the gate valve once you're done draining the tank so I recommend going with a Valterra valve since they leave the connection point open for access. We have the following cable lengths for a 3" Valterra...
    view full answer...
  • Comparing Valterra And LaSalle Bristol Cable Actuated Gate Valves
    The gasket is the portion of the gate valve that's allowing waste water to leak through and not actually the gate. Both companies are using a rubber gasket that will eventually fail so it really comes down to the other features of the gate valve to determine which you'd prefer. LaSalle Bristol's cable actuated gate valves don't allow you to replace the cable if there was ever an issue, whereas Valterra's do come apart and will allow you to replace components without having to replace the...
    view full answer...
  • Replacement Cable Actuated Waste Valve Options For A 2011 Keystone Montana High Country 5th Wheel
    Determining the correct replacement for your old waste valves is going to depend on the brand and length of your current cables. If you have Valterra branded valves you could reuse the cables you have and avoid rerouting new cables. You could simply pick the least costly option for the black # TC372 and gray # TC172 valves and just hang onto the new cables. You can remove the four bolts holding your old valves in place and then swap in the new valves so you can void having to cut or glue...
    view full answer...
  • Measurements of Valterra Waste Valves
    For the Valterra # TC372 the bolt pattern is 3-3/4", and the overall length, minus the protrusion, is 13-7/8". For the Valterra # TC172 the bolt pattern is 2-1/2", and the overall length, minus the protrusion, is 9-1/4". I have attached dimensional drawings to illustrate this and provide some additional measurements.
    view full answer...
    Image 1 for Image 2 for
  • Could Valterra # TC372 be Used with Winnebago Valve 129147-02-000
    Yes the Valterra Waste Valve Body part # TC372 is the same as the Winnebago 129147-02-000 that you have which cross references with T40H.
    view full answer...
  • Can the Valterra Waste Valve with Cable For Black Tanks Be Used In Place of a LaSalle Bristol
    Yes, you can swap out the LaSalle Bristol Cable-Actuated RV Waste Valve part # 34466N4BB72GM that you have for the Valterra Waste Valve Body w/ Flexible Cable part # TC372. The swap will be a direct, bolt-on replacement as you can reuse the spigot flanges that you have now with the above Valterra Waste Valve Body w/ Flexible Cable.
    view full answer...
  • Valterra Waste Valve for RV Gray Water Tank Dimensions For Limited Clearance Installation
    The length of the Valterra Waste Valve front to back part # T1001C is 4-1/2" long. It measures vertically 8-3/4" with the valve open and 6-3/4" with the valve closed. I have attached a diagram for your reference so you can compare to the area that you have. You may be interetested in the Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank part # TC372 the flexible cable included makes it easier to use the valve when you have a hard to reach installation area.
    view full answer...
    Image 1 for Image 2 for
  • Does Valterra Waste Valve Require Lubricant on Blade/Seal
    The Valterra EZ Valve Electric Waste Valve for RV Black Water Tank - 3" Diameter # TC372 does not require any lubricating of the rubber seals. I do know that some people choose to add silicone plumbers grease to the seals because they believe it helps the seals to last longer, but it is not required and also is not included in the kit.
    view full answer...
  • Availability of Valterra Waste Valve Body without Cable
    I do have an option for you, however the exact valve body that is included with the Valterra Waste Valve w/ Flexible Cable # TC372 you mentioned is not available as a separate part from the manufacturer. What you can use instead is the Valterra Waste Valve Body # T1003PBC. This is a very similar valve body that will work the same as what is included with the kit you mentioned. The body features a 3 inch diameter passage to allow wastewater to travel when it's open and the body, seals,...
    view full answer...
  • Recommended Waste Valve Extension Rod for RV Black Water Valve
    On a waste valve, the handle is right to tighten and left to loosen. We have extension tubes with handles like the Valterra Waste Valve Extension Tube with Handle - 9" # TX9HPB in different lengths that allow you to open and close a threaded valve from a distance. I've attached a link to assist with your options and also linked a video of the Extension Rod Kit for Valterra Waste Valve - Adjustable - 6" to 8" and 9" to 11" # T1046-12VP. We also have the pin type valves and cables for...
    view full answer...
  • Which RV Waste Valve Body w/ Flexible Cable Can be Trimmed Down Shorter
    We had one customer try to cut the cable of the LaSalle valve # 34466N4AB36GM and they said they weren't able to reassemble the cable after doing so as the set screw wouldn't get tight enough so I would not recommend this valve if your plan is to cut it. We know the Valterra # TC372 can be cut down and work well so this would be your best option.
    view full answer...
  • Replacing a Bristol Waste Valve With a Valterra Waste Valve
    Plumbing parts are interchangeable on RV's just as long as the fittings are the correct size. I couldn't find that exact part number but I believe I have found the Valterra equivalent. If the Bristol valve you are talking about uses the flexible cable then you can use the Valterra Flexible Cable Kit # TC172 which has a 1-1/2 inch valve or the Valterra Flexible Cable Kit # TC372 which has a 3 inch valve.
    view full answer...
  • Recommended Replacement For A Broken LaSalle Bristol Cable Actuated Waste Valve
    LaSalle Bristol doesn't make it so that you can replace much on their cable actuated waste valves besides just the handle so you would be better off just replacing the entire valve and cable system with Valterra's Black # TC372 and Gray # TC172. The old valves can just be unbolted and replaced with the new Valterra valves so that you don't have to cut any pipe or glue anything in. Valterra's cable system has a little rod at the end that clamps into an exposed port on the valve to easily...
    view full answer...
  • Can Cable of Valterra Waste Valve Body with Flexible Cable TC372 Be Shortened
    My contact at Valterra confirmed that their Waste Valve Body with Flexible Cable # TC372 can indeed allow you to shorten the actuating cable to the desired length to suit your specific RV. It will work fine after you shorten it to 36-inches.
    view full answer...
  • Can Cable be Replaced while Valve is Shut Using Valterra Flexible Cable Kit TC372
    Yes, you could actually replace just the cable without having to remove the whole valve depending on the design of the valve. Take a look at the picture I have included. You can see that the cable is secured to the valve using a set screw. So you would loosen that, pull out the old cable, put in the new one, and tighten the set screw back down. If your valve is set up the same way then it can be done.
    view full answer...
    Image 1 for
  • How to Determine if Valterra Flexible Waste Valve Cable Kit # TC372 Will Fit an RV
    Most likely the Valterra Flexible Cable Kit # TC372 you referenced will be what you need. This is a 3 inch diameter waste valve which is a very common size. The way this installs is very universal as well. The cable is 72 inches as well. Feel free to send me the picture of yours though as well as the diameter of the valve and I'll verify that it's the correct kit.
    view full answer...
  • Will Valterra Cable Work on a Bristol Dump Valve
    I spoke with my contact at Valterra who said that the Valterra Waste Valve Body # TC372 would be able to replace the Bristol Valve body that you currently have installed but that they haven't tested their cable kits like part # TC72PB with Bristol Valve so she wouldn't be able to confirm whether or not it would fit.
    view full answer...
  • Can Handle of Valterra Waste Valve be Removed and Extended
    Yes, the handle of the Valterra waste valve, part # T1003VP, does unscrew so it can be replaced or extended. We have several different lengths of extended rods that fit: 8 inches, # TX8HPB 9 inches, # TX9HPB 24 inches, # TX24HPB 32 inches, # TX32HPB 36 inches, # TX36HPB We also have a kit, part # T1046-12VP, that includes 2 adjustable rods so you can extend the handles between 6-8 inches with one or 9-11 inches with the other. You could also use a new valve that has an extension cable,...
    view full answer...
  • Is There a Black Water Tank Waste Valve Body
    The waste valve bodies alone without a hub or spigot connection are something you can get. You would need something like the Valterra Waste Valve Bodies w/ Flexible Cables for RV Black Water and Gray Water Tanks - 72" # TC1372 for both tanks or the Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 72" # TC372 for the black water tank only. There is also the Bristol Waste Valve Body for RV Black Water with Seals and Hardware - 3" Diameter # 34439240 which does not have...
    view full answer...
  • Will the Bolt Pattern on My Black Water Wastve Valve Matter When Choosing a Replacement
    Typically it's not going to matter since the bolts are just used to hold the valve body together, so the bolts holding your current waste valve together won't matter. If you waned to use the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 48" Cable # 34466N4AB48GMA you'd just want to cut off your old waste valve and slide the LaSalle on; you'd want to secure it with some ABS Solvent # 3447530889, but going this direction it wouldn't matter what your...
    view full answer...
  • Can the Valterra Bladex Valve Handle With Cable Extension be Used With the Bladex Waste Valve # T50
    The Valterra Bladex Waste Valve for RV Black Water Tank # T50 that you referenced has a handle that is attached to a tube, and the Valterra Cable with Valve Handle # TC72PB uses a cable for the extension so they are not compatible. To add an extension cable to the part # T50 you will need a whole valve body kit. You can find this part on our site listed as part # TC372. I confirmed this with my contact at Valterra.
    view full answer...
  • Troubleshooting A Cable Actuated Gate Valve That Won't Fully Close The Gate
    You'll definitely need to straighten that line out otherwise you'll keep having issues with cable not wanting to fully close the gate. You can remove the four bolts that mount the gate valve to the pipe and see if turning it 90 degrees and re-bolting it in place helps give you a straighter path. If not you would need to cut off the flanges and glue new ones in place at an angle that would allow the gat valve to be mount where the cable can sit straight. With it being at that angle it...
    view full answer...
  • Does Valterra Waste Valve Body With 72 Inch Cable Replace Valterra Bladex
    You can use the Valterra Waste Valve Body with Flexible Cable for RV Black Water Tank - 72" # TC372 to replace your 3" diameter Valterra Bladex. Both have a 3" diameter valve body which is the important aspect and why it will work for you. I have added a link to a video review for you to check out as well of the Valterra Waste Valve Body with Flexible Cable for RV Black Water Tank - 72" # TC372.
    view full answer...
  • What is Cable of Valterra Waste Body Valve Made From
    The cable of the Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 72" # TC372 is made from steel wire and it has a protective coating as opposed to some type of rod. The cables are going to be similar from both manufacturers - steel wire with a coating - but you are correct that people seem to like the Valterra better. The reason they have to be the same type (wire and coating) is that it allows the cable to flex, giving people much better options for installation....
    view full answer...


< Previous
12



Do you have a question about this RV Waste Valve?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Video Edited:
Jeff D
Employee Amy B
Written by:
Amy B
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.