Arrives before Christmas 
700-Watt inverter lets you use appliances and devices wherever the road takes you. Pure sine wave technology is perfect for sensitive electronics like HDTVs and computers. Changes your RV battery's DC output into clean AC power.
Features:
Specs:
This 12V inverter changes DC output from your RV batteries into AC power so you can plug in tools and appliances. Using pure sine wave technology, it creates clean power with low distortion, making it safe, efficient, and perfect for sensitive electronics like computers. Plus, the inverter can generate 1,230 starting watts and 700 running watts which is a great fit for small appliances and electronics.
The inverter includes 2 GFCI outlets for AC loads, positive and negative DC input terminals that connect to your batteries, and a port for a fixed-mount remote (sold separately). It has a function switch that lets you select different output voltages (100V, 110V, 115V, and 120V) and frequencies (50Hz and 60Hz). This switch can also turn the power saver on and off. Additionally, the power saving adjustment dial near the function switch sets the input and wake up thresholds for the power saver.
The system includes a number of safety features. It offers protection from over/under voltage, overloading, and overcurrent. The inverter also uses a heat sink process to protect from extreme temperatures, and an internal cooling fan removes excess heat from the unit.
For additional safety, installing a fuse between the battery bank and the inverter will protect your equipment from power surges. The Go Power 110-amp fuse block (sold separately) works with this unit and uses a slow blow time-delay feature to withstand surge current. This means it can handle short surges over 110 amps without blowing the fuse, which is great for devices with motors that require more energy to start.
The inverter mounts inside your RV in a dry location with ventilation. It should be installed in close proximity to the battery bank, but not in the same compartment. The DC terminals are wired to the battery bank.
There are 2 fixed-mount remotes (sold separately) that let you monitor and control the inverter from inside your RV.
For a simple, no-frills option, the Go Power GP-SWR-A Inverter Remote lets you turn your inverter on and off from inside your RV. It also has a LED which indicates the inverter's status.
For additional features, the Go Power GP-ISW-R-12 Inverter Remote provides LED indicators that display the voltage, output power, inverter status, power saving mode status, and fault conditions. It also has a power button that controls the inverter.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Go Power 12-volt, 700-watt, Industrial Pure Sine Wave Inverter. Now, this inverter will convert incoming DC battery power to usable AC household power wherever you go. It's an industrial pure sine wave inverter, so it does offer exact replica of AC power for your portable electronic equipment. It's perfect for medium-size loads like electronics or small kitchen appliances, and it'll run any device in the wattage range without interference. It's a very nice lightweight, low-profile design.On this end, I'm just going to go over what's on the end. Right here, has the on and off switch.
Here it'll have the dual ground fault outlets, AC outlets. Over here, it'll have a power save function switch and right here there's a power save adjustment mode. Right underneath there's three LEDs, those are the function LEDs. And if I turn around to the other end, right here is the DC input connectors, right over here is the chassis ground, and then right above it is the remote control port and terminal.Now, this does offer full overload protection. It is compatible with 12-volt systems.
Has a continuous output power of 700 watts, peak surge power of 1,230 watts. AC output voltage is 100 volts to 120 volts. Input voltage range is 10-1/2 volts to 16-1/2 volts DC. The AC output wave form, again is pure sine wave. Maximum efficiency on this is 91%.
The battery drain with no AC load is less than or equal to 1-1/2 amps. Does offer low battery alarm, low battery shut-down, and it does include everything shown here, the inverter itself.Comes with the two ring lugs. These will connect to your battery cables and allow you to connect it to the inverter right there. Also, a nice user's manual that'll describe how to install it and describe how to operate it. Weight on this unit is about 5.7 pounds.
And a measurement on it, the length from here to this end right here is 13" long, the width on it, here to here, is going to be 7-7/8" wide, and the total depth from the bottom to the very top is going to be 3-1/4".But that should do it for the review on the Go Power 12-volt, 700-watt, Industrial Pure Sine Wave Inverter.
Do you have a question about this RV Power Inverter?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.