Hopkins Leveling Kit w/ Wheel Chock for Trailers and RVs

Hopkins RV Leveling Blocks - HM08200

Use this sturdy kit to quickly and easily position your RV so that it's level at the campsite. Attach the ramps to the tops of lumber (not included) to create leveling blocks that are simple to drive up. Docks on top piece keep tire from rolling.

Features:

• Heavy-duty kit lets you create a system to level your trailer or motor home
• Durable levelers are created out of included plastic ramps and 2x8 lumber (not included)
  • Sturdier and more reliable than plastic blocks
  • Customizable - cut wood to fit your application
• Wheel docks attach to top board to prevent tire from rolling once RV is leveled
• Wheel chock keeps your trailer or RV from moving while it's parked
  • Place chock under a wheel on the opposite side of your RV after it is leveled
• Non-skid traction mat goes under leveling blocks to limit their movement as you drive up
  • Can be wrapped around leveling blocks when not in use to be used as a carrying strap
• Bright green ramps and docks make it easy to see when your RV is centered on blocks
• Kit includes 4 ramps and 2 docks to create 3 leveling blocks, 1 wheel chock, and 1 traction mat
  • Installation screws for attaching ramps and docks to wood also included

Specs:

• Maximum amount of additional leveling height: 4-1/2"
  • Additional leveling height per block: 1-1/2"
• Ramp dimensions: 3" long x 7-3/16" wide x 1-1/2" tall
• Dock dimensions: 6-9/16" long x 6-3/4" wide x 1-1/2" tall
• Chock dimensions: 8-3/4" long x 7-1/4" wide x 4-15/16" tall
• Traction mat dimensions: 24-1/4" long x 6-1/2" wide
• 3-Year warranty

Durable Wooden Support

The Hopkins RV Leveling Kit uses durable wood (not included) to support your RV during leveling. Plastic leveling blocks sink into soft surfaces and can bend easily when your heavy RV is on top of them. This can lead to the blocks cracking or even breaking, which can cause damage to your RV's wheels and axles. The ramps used in the Hopkins leveling kit attach to lumber to create thick, sturdy supports for your RV that won't bend or break.

Customizable and Easy to Assemble

The Hopkins RV leveling kit can be easily customized to fit your RV's wheels. This is because it uses 2x8 lumber (actual dimensions: 1-1/2" x 7-1/4") that you cut to size. For the best fit, place the wheel docks on either side of one of your RV's tires, so that your wheel sits between them. Measure from far edge to far edge of each dock and cut the lumber to that length. This board will become the top leveling block. If you have a tandem-axle setup, the board will need to be cut to accommodate both wheels.

After measuring and cutting the lumber, attach the wheel docks to each end of the board with the included screws. Unlike traditional leveling blocks, which typically don't have tire stops built in, the block that is made with the wheel docks keeps your tire from rolling forward or backward off of the leveler.

The length of the other 2 leveling blocks will be based on the length of the top leveler. To create the middle leveler, just cut the board to be 6-1/4" longer than the top piece. The bottom leveler will need to be 12-1/2" longer than the top board. Attach the treaded ramps on top of the boards on each end with the included screws.

Simple to Use - Level Your RV Without the Guesswork

The Hopkins RV leveling kit adds 1-1/2" of increased height for each leveling block you use, for a maximum of 4-1/2" of additional height. After assembling the levelers, set the top board (the shortest board) in front of the wheel on the side of the RV that you need to raise. Slowly drive your RV up the leveler and over the plastic wheel dock. Once the wheel is set in between the 2 docks, check to see if your RV is level with a bubble level or an electronic leveling device. If your RV is still too low on that side, reverse off of the leveling block and add the middle block. To do this, set the top leveling block between the 2 treaded ramps on the middle block, nesting it in place. Then drive back onto the levelers until your tire is between the wheel docks. Check your RV's level. Add the third block if necessary. Once your RV is level, secure the tire on the opposite side of your RV with the included wheel chock.

08200 Hopkins Leveling Block Kit for RVs with Wheel Docks and Chock