Video Transcript for Review of SnapPad RV Jack Pads - HiWay Bus Jack Pads 11-1/2 Inch 12 Inch Jack Foot - SN66FR

Hi everybody, Andy here with etrailer.com and today we're gonna take a look at the SnapPad HiWay bus jack pads. These four heavy duty rubber pads are going to snap onto your class A motor homes HWH or valid leveling jacks with four 11 and a half inch or 12 inch round jack feet to make leveling faster and easier for you, eliminating the need to crawl under your motor home to position plastic pads or wood blocks. Now, it is recommended to measure your jacks to confirm compatibility as the foot size and shape of the jacks on your leveling system can vary from model to model and year to year. Now, let me go ahead and retrieve my tape measure here and just give you the overall measurement of these pads. So, of course, all of these pads here are going to measure the same as this one. So, looking at the overall diameter, as you can see, we are sitting right around 13 and 7/8th inches in diameter.

And then, laying this down here on the table, let me retrieve my ruler. Looking at the overall height, we're sitting right at two and a quarter inches tall. And, of course, the increased surface area of your leveling jack's feet is going to give you added support for your motor home, preventing sinking into soft ground, unlike smaller metal feet. Now, these pads are made here in the USA of heavy duty rubber and that rubber is actually made from recycled tires. So, these are going to grip uneven terrain and prevent your metal feet from rusting or bending.

The built-in drains are going to release moisture to prevent your jack feet from corroding. They're also going to serve as a cushion, so your metal feet won't crack or chip away at your driveway, and they're going to help dampen vibration from inside of your fifth wheel or motor home that could cause shifting. There's not going to be any need to remove and replace these pads or carry other jack pads or blocks around with you. Now, these are going to be a simple one-time installation. You're just going to simply line up the pads beneath your jack feet and lower each foot until the lip on the pads fully engage and lock into place.

You'll actually hear a snapping sound once the pad is securely installed. Installation is permanent, so once you have the SnapPad secured, you're never going to have to worry about crawling under your motor home to place pads again. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy.

Thank you for joining me.