Sleek RV bathroom faucet has 1/4-turn stems that prevent leaks. Low-flow aerator conserves your water supply while you're dry camping by reducing the flow of water without compromising water pressure. Includes mounting hardware.
Features:
Specs:
To install, use the inlet shanks to drop the new faucet in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Phoenix faucets, Catalina RV bathroom faucet, with the dual-lever handles. And a nice chrome finish. Now, this Catalina series faucet will let you upgrade your bathroom faucet in your RV or camper. This one's a dual-handled design, with the lever-style handles. And what's nice is these handles use a quarter-turn cartridge stem, which enables the faucet to fully turn on and off, with just a quarter of a turn.Does use a washerless design, reduces friction and daily wear for long-lasting durability. On the spout, it uses a low-flow aerator to reduce the flow of water, help conserve your water supply.
This faucet is a non-metallic ABS plastic construction. Uses a spin-welded Celcon thermoplastic underbody. And if you notice, it was a nice chrome finish to provide a nice sleek look.This is a two-hole and even a three-hole installation. The inlet shanks have the standard male NPSM connections. Comes with the included mounting nuts and rubber gaskets for installation.
They're all included. Now, it also does require some tile and tub caulk, which is not included.Flow rate on this faucet is 1.2 gallons per minute. Few dimensions on this, the overall dimension width, with the handles in this position, it's going to be right at, tip to tip, 9-1/2 inches wide. The overall height, from the bottom of the base where it's going to be mounted, to the top of the handles, is going to be 3-1/2 inches tall. Total depth from the back of the base to the edge of the spout here, it's going to be right at 6 inches deep.
The spout, just the spout length, from the front of the base to the spout, it's going to be right at 4 inches. The base itself, the width on that, from edge to edge is right at 6-1/4 inches wide. Total depth on it is right at 2-3/8 inches deep. And the inlet shanks for the hot and cold water, distance between them, center to center, is your standard 4 inches. And the length on those are right at 2 inches.But that should do it, for the review on the Phoenix faucets, Catalina RV bathroom faucet, with the dual-lever handles, and the chrome finish..
great service
It was perfect
I got exactly what i ordered...perfect...thats hard to find today in the world of e_comerce
Did just what I bought it for!
Have not installed yet but product looks great
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.