Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Sleek, hybrid RV kitchen faucet has washerless 1/4-turn stems that prevent leaks so you won't have to worry about wasted water. The hi-rise spout rotates around so you can access the faucet from multiple angles around your countertop.
Features:
Specs:
To install, assemble the 2 pieces of the faucet together, and use the inlet shanks to drop the new faucet and deck plate in place of your existing faucet. Then tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix Faucets dual-handle RV kitchen faucet. This units adds or replaces a kitchen faucet in your RV. It's going to feature the dual acrylic lever handles that gives the unit a real nice look. The base of the unit is made from a plastic construction that's going to feature a chrome finish. The spout is a high arc metal spout that has a chrome finish as well. Completely lead-free design.
It does feature a low-flow aerator located right here that's going to have a flow rate of 2.2 gallons per minutes. The mounting areas are going to require 2 holes for your installation. These holes are going to need to be separated on center by 8". These are going to be the connection points for the hot and cold water lines. Outer diameter is 13/16", inner diameter is 1/2". The base going this direction is going to measure about 2-1/4".
We'll take a measurement at base going this direction, edge to edge we're looking at a measurement around 10-1/4". A few other measurements that I want to mention for you. I took a measurement of the overall height. I measured from the countertop, so from the bottom of the base, to the very top of the faucet, go at a straight line measurement, and that gave me a measurement of right around 9-1/2". I also took a measurement from the countertop going at a straight line to the closest point of where the water would come out, and that's going to be around 7-7/9". The overall depth from very front to very back is going to measure around 8-3/4".
I also took a measurement from the very center of the base to the center of where the water comes out, and that's around 7-1/4". The unit's a very easy installation. Again, 2 holes are needed at the mounting surface. They need to have a diameter of around 1". It does come with a backing plate and the plastic mounting nuts to get the unit installed. It does include your detailed installation instructions.
These are going to help walk you through that installation process. Over here it's got that installation process. On this side it's got some operating instructions, cleaning tips, helpful hits. On the back side it's going to have a breakdown of the detailed parts list. That's going to do it for today's look at the Phoenix Faucets dual-handle RV kitchen faucet.
Item was exactly as described and was a good replacement.
Bought to replace original faucet that was leaking at the counter top connectors. This faucet has a higher arch and fit perfectly. Easy to install also.
Good service and communication
We have an older RV and became very worried when our kitchen faucet broke. Someone recommended etrailer to us and we were so delighted to order the parts we needed and most importantly, received them in time to fix the faucet the very next weekend!
I have an older trailer that was recently serviced by a deporable hating major camper retailer and the customer service was God awful and workmanship from that place was even worse. So when I noticed that my campers recently repaired kitchen faucet was leaking terribly I knew I could not take it back there, even if it was still under warrenty. Shopping around, etrailer certainly had the best pricing. The shipping was fast and the brand was the same that I would have bought at that place where I will never shop again.
Thanks etrailer!
This was a cheap replacement for my other faucet that the mixing valve was busted on. It’s nicer than what I was expecting from the picture. Working good!
Install was easy and it works the way it should
Fit perfect, fast, fast shipping and service. The order was right and service great.
Looks good but haven't installed so can only say that it was delivered as promised and appears to be good quality.
A+++ Always excellent service, Would buy again!!!
Happy with product. No complaints
Arrived earlier than expected!
Great service
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Kelly H.
8/1/2019
Still working fine!