1. RV Faucets
  2. Phoenix Faucets
  3. Kitchen Faucet
  4. White
  5. Standard Sink Faucet
  6. Dual Handles
Phoenix Faucets Catalina RV Kitchen Faucet - Dual Lever Handle - White

Phoenix Faucets Catalina RV Kitchen Faucet - Dual Lever Handle - White

Item # PF221204
lowest price pledge
Retail:$51.15
Our Price: $42.82
You Save: 16%
RV Faucets
Orders above $99 qualify for Free Shipping
Shipping Weight: 1.97 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Dual-handle plastic faucet has washerless cartridges that reduce friction for a long life. Low-flow aerator conserves your water supply by reducing the flow rate. 2-Hole installation, can be installed in place of 3-hole setup. Lowest Prices for the best rv faucets from Phoenix Faucets. Phoenix Faucets Catalina RV Kitchen Faucet - Dual Lever Handle - White part number PF221204 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (114)
  • Q & A (3)
  • Videos (2)
  • Photos
  • Why etrailer?

Phoenix Faucets RV Faucets - PF221204

  • Kitchen Faucet
  • White
  • Standard Sink Faucet
  • Dual Handles
  • No Sprayer
  • Plastic
  • High-Rise Spout
  • 11 Plus Inch
  • Phoenix Faucets

Dual-handle plastic faucet has washerless cartridges that reduce friction for a long life. Low-flow aerator conserves your water supply by reducing the flow rate. 2-Hole installation, can be installed in place of 3-hole setup.


Features:

  • Catalina series faucet lets you upgrade the kitchen faucet in your RV or camper
  • Dual-handle design with lever-style handles
    • 1/4-Turn cartridge stems enable the faucet to fully turn on and off
    • Washerless design reduces friction and daily wear for long-lasting durability
  • Low-flow aerator reduces the flow of water to help conserve your water supply
  • Non-metallic ABS plastic construction
    • Spin-welded Celcon thermoplastic underbody
  • White color
  • 2-Hole installation
    • Can also work in place of a 3-hole faucet setup
    • Inlet shanks have standard male NPSM connections
    • Deck plate and 2 mounting nuts are included
    • Requires tile and tub caulk (not included)


Specs:

  • Flow rate: 1.8 gallons per minute
  • Overall dimensions: 13-1/2" wide x 14-1/8" tall x 10-1/2" deep
  • Base dimensions: 10-1/4" wide x 2-1/4" deep
  • Spout length: 8"
  • Distance from mounting points to aerator: 8-1/2"
  • Distance from countertop to aerator: 6"
  • Inlet shanks:
    • Inner diameter: 1/2"
    • Outer diameter: 13/16"
    • Distance between: 8"
    • Length: 2"
  • 1-Year warranty


2-Hole Installation

This faucet lets you upgrade the kitchen faucet in your RV or camper. Using the standard NPSM inlet shanks, drop the new faucet and deck plate in place through the mounting holes of your existing faucet. Then hand-tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. The use of tub and tile caulk (not included) is required.



PF221204 Phoenix Faucets Catalina RV Kitchen Faucet - Hi Arc - Dual Lever Handle - White





Video of Phoenix Faucets Catalina RV Kitchen Faucet - Dual Lever Handle - White

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Phoenix Faucets Catalina RV Kitchen Faucet Review

Hi there, RV and camper owners. Today, we're going to be taking a look at Phoenix Faucets line of Catalina double lever kitchen faucets. They're available in chrome, white or nickel. Now we just installed a new faucet here today due to the old one that was leaking around the grout and stuff. And our sink that was in here was also leaking. So we had replaced that.

And since we went with a stainless steel sink here, we wanted to have something that was a nice metal finish to match it.You can see our old one here this really just wouldn't have gone great with our stainless steel sink and you could see how nasty it was in there. Our new one installed now, we've got nice, good seals all the way around and everything is very modernized. So whether you're making some repairs or you're just looking to modernize your camper RV, this is going to make a great option to really give everything a nice clean new look.We've got both hot and cold with labels on each. And both of them will twist towards you, which compared to the old sink, which had really odd levers to them, they twisted both in kind of a strange motion. This faucet feels much more natural, just like when you would have at home.

The long neck on our spicket here is also great for large pots and pans, especially tall ones if you're going to boil some noodles or anything like that. You have one that just kind of comes straight out. It can be hard to really get those pans up underneath it there.But with this big arch, you can easily get the faucet down inside those really deep pans. It features a low flow aerator inside to help reduce the flow of water, so that way you can conserve some of your water supplies. But even with that in there, it still puts out 1.8 gallons per minute.

Our faucet's constructed of an ABS plastic, so you don't have to worry about any corrosion. It's also a washerless design, which can help reduce friction to extend the life of all of your components.And we know it can be tight in some of the RVs out there. So in case you're worried about any clearances, if you've got any low-hanging shelves or appliances just above your sink, from the countertop to the top of our spicket here it's going to be about 11 and a half inches. The shanks coming down through the bottom of our faucet are standard MPSM fittings. So they should mount right up to your existing plumbing in your RV or camper.This faucet is a two-hole design.

Each of the handles will drop down through your counter, but it is also designed to work with a three-hole setup. So if you've got one here in the middle, this is still going to seal up around it and everything's going to install just fine. And it's going to cover up that hole. So you don't have to worry about that if you've got the three-hole at home.If you follow along with us, we installed the new sink, drains, as well as the faucet here. So you can follow along and have the same confidence to do it yourself at home. Today, we're going to be replacing our faucet with a chrome one and to make everything match, we're also going to be replacing our sink and our drains.So you can see why we're replacing our components here. The silicone that's around our sink is starting to deteriorate. It really doesn't look very pleasing to the eye. And once it starts to deteriorate like this, moisture can get down behind the sink and leak down behind your cabinets and you won't even know it. If you have moisture around up here, when you're washing dishes or anything and you get some splashes. That can all lead to mold and mildew behind your cabinets there.Down inside, we also have our seals here around our drains that really look pretty cruddy and you can get some leakage around these as well. And that also leads to that mildew and damage from water intrusion back behind our sink. Our faucet's also old and outdated. So we're going to go ahead and modernize that while we take care of these sealing issues that we've got.We're going to be modernizing everything by replacing the sink drains and the faucet. We're going to go ahead and need to get our sink disconnected. Our sink doesn't have anything attached to it except for our drains here. You're going to need to access the bottom of your sink. Oftentimes, you can just pull out a drawer or open a cabinet in order to get here. And these just unscrew. And now that we've got those bolts loose, it'll come down just a little bit. We don't need to pull on it or do anything like that since we don't have any faucets or anything else that attaches to our sink, that's really all we need to take loose there.Underneath your sink, you'll have attachment points. These can either be a screw head or a nut. Ours has a wing nut on it that we're going to be twisting to remove it. But you may have just a nut that you can just use a screwdriver or a socket on. Now that we've got all of our little wing nuts off everything underneath, there was one in each corner. So there was total of four in ours. Just make sure you check and get all of them all the way around.We now need to break the silicone all the way around and we're just going to run our razor blade right around the edge. Just carefully and gently just bringing that along, right along the seam there. This would just make it a little bit easier to separate our sink from our countertop. Now that we've got it trimmed all the way around, we're just going to come underneath and we're just going to kind of give some pressure on it, looking to see if we have any spots to kind of want to lift up.And this corner right here, we've got wanting to lift up some when we push on it. So we're just going to take our putty knife now and just kind of run that underneath of it. Keeping some pressure on it as we push up to help break the rest of the seal and get the sink separated. Once you've got it worked all the way around and it'll just pop off of there. We can pull it up. We're going to go ahead and set this aside and get everything cleaned up here on top. We can go ahead and use our putty knife, razor blade to clean that up. And you can use any chemicals. Just be careful not to scratch the countertop.Now our new sink is going to be hanging over just like our old sink was. So if you get a little scratch or something there, it's likely going to be covered up. Just try to be careful here around the outside edges. So now that we get everything cleaned up around our sink, at this point, you could be ready to put your sink back in. We're going to remove our faucet because we're going to be replacing that as well.So if you're just doing the sink, you can follow along with us right after we get this out here. To remove our faucet, the first thing you want to do is make sure that you've got all your water turned off. We checked that before we took our sink out. See here if we turn it, we've got nothing. Down below, you'll have two lines go into it. You have your hot and your cold line. These just unscrew. And it's never a bad idea, especially if you've used it recently, just to have a rag around because there's maybe a little bit of water in there.We're going to undo the other one. And then once you get your hoses out of the way, we can remove the plastic nuts that secure the faucet in place. There's going to be one on your hot and one on your cold side. Now in those cases, it's going to lift up, you may have some silicone that you may need to run a knife around to break the seal or not. Ours is just going to lift out of there. The bottom plate here is siliconed onto it, so we will have to remove that. But as far as the sink mechanism here, it just comes right off.And then just check this piece, you may or may not need to remove the silicone from it to get it off. Ours didn't have a whole lot going on there. So it came off pretty easily. We're going to go ahead and clean this up now and get all this ready for our new faucet. Now that I got it all cleaned up, we want to check to make sure everything fits. Our new faucet does drop down in there. Make sure you're putting down the correct sides on there, blue on the right for our cold and hot on the left. That's how ours was set up. So make sure you're just matching those lines back up.So everything looks like it fits. We want to seal this bottom piece up to the top of our surface, so that way moisture can't get down underneath of it. You can see on this one here, this one wasn't properly sealed. So that's why this wood is bulging in different areas here due to the moisture that already got down in there. So we're going to make sure we seal that up to prevent it from getting any more saturation. So the bottom piece here that we just went ahead and slid it off, just because it'll be a little bit easier.We're just going to run a bead of 100% Clear Silicone all the way around here. You can pick that up at your local hardware store if you need some. And we just need a light bead around the inside. Don't worry if you get a little on the outside, we can clean that up afterwards. So now that we've got that bead on there, we're just going to slide it back on to our faucet and then we can drop it down into place. I did clean up the surface with some alcohol after I scraped everything off of it to help ensure we get good adhesion.Once you slide it through on the bottom, we're going to take the rubber washers that come in your kit, slide it over, and then use the nuts that come in your kit to tighten those down. We're going to do the same thing over on the other side. And you just want to tighten it down until it's snug. You don't want to overdo it. It is just plastic. And then we can reattach our hoses. Our new drain here, we're going to have to remove the nut here off the backside. There's also a steel there. Make sure you keep those together. And below that, you're going to have another nut. We're going to also unthread this one.We're going to set that aside. You'll have a paper as well as a rubber gasket there. Save both of those. You're going to need those as well. Now that we're down to just the top part here, we're going to need to use some plumbers putty. It's kind of like a Play-Doh-y substance, and we're going to use this to make a seal. So I just gone ahead and kind of rolled it out there, so I can make a gasket that's going to wrap around this here.And that's really just what we need to do is just kind of wrap it around there and try to make it even if you can going around. And this way, when we go to tighten this down, this is going to squish out and give us a good seal. We can peel off the excess once we've got it tightened down. So I'm going to take this now and it's going to go from the bottom up, slide it through, kind of just give it a little push and pull there just to make sure it's in there. And then we can take our gaskets, put those back how we removed them. So rubber first followed by paper, then our nut.And we're just going to tighten this down on there. It is a large nut. You may want to use a pair of Channellocks when tightening it to make sure you get it all the way secure. We can now tighten it down to squish the seal as well as the plumber's putty that we've put on there. We went ahead and replaced both of them. So we got those snugged down. We're just going to flip it over here so you can see the other side. I'm just going to temporarily set it into place. And the excess that we've got here, we can just peel this right off.Now that we've got it all cleaned up up top if you we're just replacing the drains, you can go ahead and hook those back up. I'd recommend using the new seal and the new nut if you can. Depends on your line, whether or not you can slide this over it or not. If you can take it off, the pipe off and slide this on. In our case, we're not going to be able to slide this over our pipe due to the way the pipe is designed. It won't fit over it, but we will be using our seal. But we're replacing our sink, so we're going to go ahead and get the sink prepared and set it back down before we attach ours.Our new sink does come with some new studs, so we're going to grab those and we're just going to thread those into the attachment points. There's six of them, three in the front and three in the back. So just thread these guys in there. Before we drop our sink in, the entire way around, we're going to be putting a bead of 100% Silicone. We're going to be using the clear color because we have a stainless sink. It's going to help it blend in and look a lot nicer.If you had a porcelain or a white one, then you might want to go with a white instead of a clear. You could pick this up at your local hardware store. And we're just going to give ourselves a generous bead around the outside, because we want this to seal up against our countertop. So we don't want moisture getting underneath that's going to damage our countertop and can leak moisture into cabinets down below causing water damage there as well.If you we're replacing your faucet, this is the same silicone that we used when we put that in place. Now that we've got that in place, real quick before we drop it down in there, we're going to just pull the old gaskets out from our pipe down there. And make sure that we set our new gaskets in place, so we don't forget those. We'll now gently set it down into place and then we'll head underneath, so we can get our attachments made. You want to make sure your drains are facing towards the rear of the sink. That's where it's going to line up best with our pipe as well.We can now take the wing nuts that come in your kit as well as the L brackets, slide those over the studs to make sure that this portion here is going to catch onto the counter. Kind of similar to what it would be like there. So it snugs our sink down. Thread those wing nuts on there and then just snug them down. I like to kind of get this one touch in, put just a little bit of twist on it and then go to the next one and then make sure you tighten these down evenly all the way around to ensure that it pulls it down flat up against the countertop so that silicone can seal.There's a total of six, so we're just going to go ahead and snug down the remaining five. After you come up top if it's still wet, you can run your finger along the edge to smooth it out. Depending on the set time of the silicone you got, it may become tacky. And in that case, when you try to do it, just going to kind of turn into little boogers. And that's kind of what happened to ours here, got a little tacky. It's okay if it does just get that stuff cleaned off out of the way if it does get all tacky on you, and then you can just put some fresh on the outside and then use your finger to smear that down.So we're just going to give it just a real, just real light bead right along the outside there. We're going to do this all the way around to make sure it seals up. And then I'm just using my finger to smooth this out. We can clean up the excess. We're trying to push it kind of down in that groove where the two surfaces meet to make sure we're sealing it up. We're just cleaning up any excess around the outside that we had. So now we've got it all sealed up, we're going to give it 20 or 30 minutes to dry.It's starting to get a little tacky and when we're wiping it off, our paper towels kind of ripping off here. You can see on the front on some of it. So if we let it stick up a little bit longer, you can actually just take your thumb and just kind of rub it across it like that. And that'll all these little bit here will just start to peel right off of there. Once we've got it set up though, then we'll test out and make sure that we have no leaks. So while let's set it up and drying up top, we're going to come back down here below and we're going to thread our pipes back on.Kind of got to get them both started at the same time here. Because we don't want one putting pressure on the other and you want it to feel nice and even when your pipes are gone back up. Because the positioning of a new sink, the drain holes might be slightly further forward or backward or off to one side just a little bit. So your pipe, just want to be careful when going back up that you don't overstretch it or damage it. So we've gone ahead and finish cleaning everything up and we tested it out to make sure we didn't have any leaks. The plugs here, if you look, it's got these little raised sections. If you set it down in there with the raised sections resting on the cross, that holds it up and allows water to pass through. So it's not going to hold water kind of like you see now.You give it a little twist, it'll drop down in there further, and that will seal against the bottom and that'll fill it up. So we can turn it on, let our sink fill up and then we can check down below to make sure we don't have any leaks coming around our pipe around any of our seals. So you want to let sit in there, I would recommend to let it sit for about 15 minutes just to make sure you don't have any seepage or anything. Just check around here for any wetness that you might have. If you have any wetness down here, then you may have a leak and you may need to tighten up your nut a little bit more if you don't have it all the way tightened.Same with any of your fittings, check all of your connections to make sure everything's nice and snug. If you still continue to have a leak, then you may need to disassemble and reapply the plumber's putty and re-tighten it back down. We don't have any leaks over here. So we're just going to go ahead and fill out the other side and then make sure there's nothing on this side. As long as we don't have any leaks over here, then we're good to go, And that completes our look at Phoenix Faucets line of Catalina double lever kitchen faucets.


Customer Reviews

Phoenix Faucets Catalina RV Kitchen Faucet - Dual Lever Handle - White - PF221204

Average Customer Rating:  4.6 out of 5 stars   (114 Customer Reviews)

Dual-handle plastic faucet has washerless cartridges that reduce friction for a long life. Low-flow aerator conserves your water supply by reducing the flow rate. 2-Hole installation, can be installed in place of 3-hole setup.

- PF221204
by:

Looks amazing, great quality!



- PF221204
by:

worked fine but it is kind of a cheaply made faucet.



- PF221204
by:

Petty cheap. Not as good as original. Wish I would have spent more money.



- PF221204
by:

Nice replacement! Better than the original and easy to install.



- PF221204
by:

fit perfect. easy installation, good price, and quick delivery. the only thing I didn't like about it was the swivel I used on my old faucet didn't work on the new one, but that's OK.



- PF221204
by:

It was a piece of crap that broke in about 2 months.



- PF221204
by:

EZ to install and ored came when promised. ETRAILER ROCKS !



- PF221204
by:

Second time I bought faucets for travel trailers. The work and fit right at a fair price.



- PF221204
by:

came quickly, for a good price Iam happy with my purchase, customer service when ordering was great



- PF221204
by:

Just what I needed.



- PF221204
by:



- PF221204
by:



- PF221306
by:

Review from a similar Catalina in RV Faucets


Thank you for all your help, when I placed the order I could not figure out why it told me that it would not ship until sept 3rd thru the sept 5th. I emailed etraier and they told me that they would take care of it and once I got ahold of you I received my products within a week and a half, Thank you for being on top of your messaging and getting back to me ASAP. my only thing I would say is that they should tell you when you order of there is going to be a waiting period of that long or if that Item is not in stock at etrailer. Thank you for all your help you ended up making my experience with etrailer so much better. Thank you etrailer for all your help


Comments
it is still working great
Theresa m - 07/04/2021


- PF222405
by:

Review from a similar Catalina in RV Faucets


Looks nice. My husband had to work with it a bit and take out a white plastic piece to give us decent water pressure. Before that it was just dripping. Also, the end piece (not sure what is called) couldn't be screwed on evenly. There is a small gap that is noticeable to me but not my husband.



- PF223362
by:

Review from a similar Catalina in RV Faucets


Excellent RV faucet set. Shipping was fast and item arrived earlier than expected. Fit perfectly and works as good as they come. Thank you, etrailer.com. I will definitely purchase from them again.


Comments
Still working well after a year in my camper..
John L - 01/29/2021


- PF221306
by:

Review from a similar Catalina in RV Faucets


I wish I could give this faucet 5 stars, but it's the usual chromed plastic type for RV's and not metal (preferably stainless steel) like residential faucets; unfortunately, the way my sink cabinet was built prevents using residential faucets. That being said, it's fairly well-made, very easy to install and reasonably priced. Of course, there's absolutely no reason why it couldn't have been made from stainless steel to last longer, except that they'll sell more because the plastic ones wear out.



- PF221403
by:

Review from a similar Catalina in RV Faucets


This was a replacement faucet for the OEM that broke in our RV after 10 years. It got 4 stars as it has a lot of plastic, so not as sturdy as what is in the RV we just purchased. It was easy to install. I would get it again.



- PF221503
by:

Review from a similar Catalina in RV Faucets


This faucet was very easy to install, fit perfectly into our countertop openings and works really well. The stream to spray toggle works great - I have no complaints about this unit and would recommend it to others.



- PF221306
by:

Review from a similar Catalina in RV Faucets


I’ve had this for 1 year. It’s excellent in functionality and with optional spray features. Has performed great with RV low water pressure. Highly recommend.



- PF221306
by:

Review from a similar Catalina in RV Faucets


I deliberately ordered an inexpensive kitchen faucet. Obviously, haven't used it yet. The process was very smooth, shipping was quick and delivery was quite prompt. Installation was easy. Thanks!!



- PF221305
by:

Review from a similar Catalina in RV Faucets


Like the tall height. Makes it easier to fill pots or containers.



- PF223403
by:

Review from a similar Catalina in RV Faucets


These dont last long, but arent bad. I just wish they could take more abuse from guests, but it is plastic. Easy to install.



- PF221306
by:

Review from a similar Catalina in RV Faucets


Easy to install looks great and works g reat



- PF221305
by:

Review from a similar Catalina in RV Faucets


Have bought from etrailer many times never had an issue great service



- PF223502
by:

Review from a similar Catalina in RV Faucets


Loved it works very well


25
114
Show More Reviews

Ask the Experts about this Phoenix Faucets RV Faucets

  • Phoenix Faucets Catalina RV Kitchen Faucet and 2006 Coachman SOA
    The Phoenix Faucets Catalina RV Kitchen Faucet, Dual Lever Handle in White, # PF221204, has a distance of 8" between the shanks, center to center. If your RV matches with this and will accept the base dimensions of 10-1/4" wide and 2-1/4" deep then yes this will fir. Please see the product review video attached.
    view full answer...
  • Does etrailer Sticker Come on Phoenix Faucets Catalina RV Kitchen Faucet
    No offense taken whatsoever and the etrailer sticker will not be applied on the Phoenix Faucets Catalina RV Kitchen Faucet - Dual Lever Handle - White # PF221204 or Brushed Nickel # PF221402 The sticker is put on just for our use when taking photos so people know the photo is our own, but the sticker won't be on the faucet when you receive it. I have added links below to a couple video reviews for you to check out as well of the Phoenix Faucets Catalina RV Kitchen Faucet # PF221204...
    view full answer...
  • Durable Replacement Kitchen Faucet with Three Hole Installation
    The Phoenix Faucets Catalina RV Kitchen Faucet part # PF221204 would work just fine in place of a three hole faucet. That said, there are no benefits in regards to durability from replacing a three hole with a two hole. The benefits in regards to durability would come with the faucet construction. The majority of faucet like the above are made of plastic which can break so if you are looking for a more durable option then go metal, the Phoenix Faucets Hybrid RV Kitchen Faucet part # PF231402.
    view full answer...

Do you have a question about this RV Faucet?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality rv faucets for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate rv faucet information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Mary E
Written by:
Mary E
Employee Amanda M
Edited by:
Amanda M
Employee Halie H
Updated by:
Halie H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.