4-7/8" Round. LED porch light illuminates your RV's exterior with bright white light at a downward angle. Durable polycarbonate base and lens. Surface mount. 2-Wire pigtail. 9 Diodes.
Features:
Specs:
Surface-mount RV porch lights install using pre-drilled mounting holes in the housing. These lights lay flat against the RV surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the RV.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're taking a look at LED RV, Porch or Utility Light. This low profile round RV light serves as a porch or utility light for your RV or trailer. I already have it hooked up to power, so I'm gonna turn it on and then turn off the overhead lights. So you can see it in a low light setting. So you can see here it sends out a really nice, consistent signal. Nice, bright light output.
That is a LED system. LEDs make great replacements for incandescent lights. They last longer, burn brighter and they're more efficient.With LEDs you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments. This unit contains a nice, clear lens. It's held in place with the included screws.
And then the base of the unit is a durable black plastic construction. Now I do wanna point out that this is set at an angle. So internally the LED board is set at an angle so that way when the light comes on, it actually takes the light and broadcasts it at a downward angle. So it's a really nice design. Very typical and common for porch lights.Surface mount installation.
So to gain access to the mount holes You need to remove the lens and then there's four mount holes on the unit. So that's directly to the surface of your RV or trailer. And that's a two wire design. So your white wire is your ground, black is for power. When it comes to the overall diameter, that gives us a measurement of about 4-7/8" and then the overall depth at the deepest point is about 2-1/8".
And then all of these mounting slots . Now it's a square mount pattern. So side to side, you're separated on center by 2" and up and down, they're separated on center by 2".That's gonna do it for today's look at the LED RV Porch or Utility Light.
Average Customer Rating: 4.9 out of 5 stars (15 Customer Reviews)
4-7/8" Round. LED porch light illuminates your RV's exterior with bright white light at a downward angle. Durable polycarbonate base and lens. Surface mount. 2-Wire pigtail. 9 Diodes.The product was just as described and a great replacement to the bulb style lights.
Fast shipping for the mail
Never used the assembly. Ordered it for the clear lens.
Have upgraded all my exterior lighting to LED and have been very satisfied with the lighting I received from Etrailer!
worked perfect for my GNC motorhome...
Perfect light. Very nice. Ty
Should include a seal for mounting to exterior of camper
This light works great and is very bright! Great replacement for the factory original.
This is the correct light, thank you. I appreciate the quick response and remedy. We would be happy to give a 5 star review and will be shipping again. Great customer service!
Easy to install and works great even after a year.
Nice product Easy to install. Thanks
Do you have a question about this RV Exterior Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.