bing tracking image
  1. RV Covers
  2. Camco
  3. 5th Wheel Cover
  4. Toy Hauler Cover
  5. 23 Feet Long
  6. 24 Feet Long
  7. 25 Feet Long
  8. 26 Feet Long
Camco UltraGuard 5th Wheel Cover - 26' Long
Camco

Camco UltraGuard 5th Wheel Cover - 26' Long

Part Number: CAM45751
In Stock
$357.16
RV Covers
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Protect your 5th wheel during storage with this heavy-duty cover. The UV-resistant, water-resistant cover is made of polypropylene. A unique triple layer top panel provides maximum resistance to rain and snow. Length is 26'. Great Prices for the best rv covers from Camco. Camco UltraGuard 5th Wheel Cover - 26' Long part number CAM45751 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (331)
  • Q & A (0)
  • Photos

Camco RV Covers - CAM45751

  • 5th Wheel Cover
  • Toy Hauler Cover
  • 23 Feet Long
  • 24 Feet Long
  • 25 Feet Long
  • 26 Feet Long
  • Storage Covers
  • Good UV/Dust/Weather Protection
  • Driver Side Access
  • Passenger Side Access
  • Rear Access
  • Camco
  • Gray

Protect your 5th wheel during storage with this heavy-duty cover. The UV-resistant, water-resistant cover is made of polypropylene. A unique triple layer top panel provides maximum resistance to rain and snow. Length is 26'.


Features:

  • UltraGuard cover fits over your 5th wheel to provide protection from dust, dirt, rain, and more during storage
  • Heavy-duty polypropylene fabric on sides resists UV rays, water, and tears
  • 3-Layer top panel beads water on contact, providing maximum resistance to rainfall and snow
    • Top and bottom layers are spun bond polypropylene
    • Middle layer is micro-porous breathable film, which repels rain and snow while allowing trapped moisture to escape
  • Integrated self-adjusting hold-down straps hold cover securely to prevent flapping
  • Heavy-duty zippers provide easy access to doors and storage even with cover in place
  • Vented design reduces wind lofting and inside moisture
  • Tough, interlocking seams
  • Recommended for use in cold, snowy regions
  • Storage bag included
  • Charcoal color


Specs:

  • Dimensions: 26' long x 110" wide x 110" tall (front) x 98" tall (rear)
  • 2-Year limited warranty


45751 Camco Ultra Guard Fifth Wheel Cover - 26 Feet Long x 110 Inches Wide x 110 Inches Tall x 98 Inches Tall - Charcoal





Ratings & Reviews

4.3

330 reviews
Review sort icon
Protect your 5th wheel during storage with this heavy-duty cover. The UV-resistant, water-resistant cover is made of polypropylene. A unique triple layer top panel provides maximum resistance to rain and snow. Length is 26'.

by:

Wasn't sure if this cover would work for my 2005 Lance 1071. I was able to talk to customer service and was assured of the measurements. Very pleased with my cover and etrailer.com



by:

I just received my RV cover yesterday. Actually 2 days earlier than I expected it. I am glad I read all of the reviews on this product. There were many helpful tips on how to insure that you didn’t tear the fabric. I used pool noodles on the down spouts as well as other sharp edges of my 38 ft 5th wheel. It took two of us about two hours to fully install from start to finish. I am very happy with the fit. I will follow up after the winter to share how it handled the windy and snowy Pennsylvania winter.



by:

after only one year in the elements this cover is already disintegrating! It now has six tears in the fragile fabric which I assume is due to UV degradation of the material but it could be just poor fabric. I have owned numerous camper covers over the years and most last 3 to 4 years. This is by far the worst performance I've experienced. And it wasn't even very cheap!



by:

I have been trying to return this item for over a week and am not getting any help. I emailed and was told a label would be sent right out by email, but it wasn't. I measured my pop-up from tongue to bumper, but this one is enormous. It drapes down on the ground from all sides. I can't use it. I need to get another one ordered very soon, but need the full refund in order to do that. I just wish I could get some help.



by:

Overall quality of material used is excellent. As for the length on sides and rear, needed to be longer as you can see in the photos attached. On four of the straps that hold it down, I had to use small bungie cords to get them attached. If overall length had eight more inches on each side it would be a perfect cover for the Magnitude. Camco, if they are going to keep selling this cover, either need to lengthen the straps or send extensions for straps.



by:

This cover has held up well since I got it. We stored the PUP outside over the winter with this cover, and didn't have any issues. We have poked a couple holes in it by accident, but duct tape has served as a good short-term fix. I think the cover came with a patch kit that I haven't tried to use yet.

The straps are easy enough to do by yourself, just need to have a good aim when throwing them from one side to the other under the camper.



by:

I loved the cover ! The material is strong, the seams are good and it fit just the way we wanted. I appreciated the instructions on how to unfold and roll up the cover inside out in order to place it easier onto the roof and let it fall into place. It came with small covers for the gutters but they didn't fit well, so we took a suggestion from another review and cut a pool noodle to fit over them which worked perfectly and will protect our cover from tearing. it also came with a rock bag to toss the straps under the belly. It had a storage bag for when we take it off and it came with what looked like a cover for the a/c unit on top, but it was too small for ours. The zippered side was right on target to give us access into the camper after the cover was on, which we needed because we forgot to turn off a light and left a bag of items inside. Lol. It was a very windy day when we installed it so it took longer than we expected but the vent holes and everything worked very well to let out the air. We are in Pennsylvania so I'll try to update the review after the winter snow and ice. It is covering a Coachman Catalina Legacy 30ft 283RKS.Please take a look at the photos.



by:

After one Northern Michigan winter it has held up well. It fit in the storage bag with room to spare in the spring. I have had covers on campers years ago that didn't even make it through one winter. So far I'm very impressed with this cover.



by:

Great product. Fit perfectly and the material is super rugged. Rochelle@etrailer helped me select the right product for my needs. Excellent customer service and a very competitive price!



by:

We put this on our Article Fox in October 2024 and took it off in May 2025. This was in Bend, Oregon thru the winter with a lot of snow. The cover really protects the rig and was actually pretty easy to put on and take off. I did it myself, at 75 years old.



by:

Fit well on our pop up. I like the front and rear are labeled that made install a breeze. The cover fit snug around the top and still has enough room to stretch over the propane tank in front and the spare tire in the back.



by:

It is a great cover and your service is always excellent but there are a few tears in the corners already.



by:

Cover arrived and I installed it by myself after work. Cover appears to be made of quality material and fit my fifth wheel very nicely. Plenty of tie downs and straps to hold it securely in place. Plenty of zippered openings so you can access your RV after cover is installed. Since this is my first winter of storage I cannot comment on durability over time, but I feel very confident that my 5'er is protected against the elements. Now I'm looking forward to spring when I can remove the cover and start camping again!



by:

Outstanding product! I will say etrailer.com also provide heads up service and contacted me about potentially shipping me a cover that they had in stock vs the one I ordered as they wanted to make sure that there was no prolonged delay that I may not want until this one came back into stock. Being proactive is good and I said " I've got time so I can wait." I ordered on 13 Sep 2020 and it shipped on 6 October 2020. A 3 week delay is not the end of the world at all. Great proactive service from etrailer.com and they are my go to for truck towing and my camper needs.



by:

The best advise I can give is DO YOUR HOME WORK BEFORE YOU BUY, and get the correct cover for your needs! I have read too many reviews from people who bought the wrong cover, i.e. a light weight cover meant for short term storage but use it long term, and then complain it didn't last. We have a V-nose travel trailer and since no one makes covers specifically for them, we had to find what we thought would be the best one for it. We measured down the top of the trailer from tip of the V to the end of the ladder and looked at ones that would fit that measurement. We decided on the Camco UltraGuard cover because of the fact that it was heavy duty and recommended for cold and snowy climates (we live in Michigan). We liked the idea of the many air vents where the sides meet the top, and the numerous tie-down straps with bungee cord ends. We watched a video about the easiest way to put a cover on, since this was all new to us. It recommended laying it out on the ground first and locating the "Front" and "Rear" labels so you knew which end was which before hauling all 38 lbs of it up on the top of the trailer, where it would be more difficult and unsafe to figure out. Also it recommended turning it inside out, with the sides folded up over the top so the sides could be dropped down easily, rather than having to be pulled out from underneath the top, as would have to be done if opened from the way it was folded at the factory. Before installation we followed the enclosed instructions which said to cover any sharp edges and points on the trailer before installing the cover. We cut pieces of swimming noodles to cover the rain gutter ends and the corners of the step frames. We then loosened and lowered the AM/FM antenna and covered it and the folding TV antenna with an old towel. Being heavy duty fabric, the cover was a little eavy to get up on top of the trailer, so we had to use another ladder, not the one attached to the trailer, to get it up there. That was actually the hardest part, but once up, it was easy to adjust in place per the video instructions and drop the sides down. Final adjustment could be made from the ground by pulling carefully on the sides . NOTE: The tie-down straps do not go all the way under the trailer as do many other brands, but have soft-fabric covered aluminum hooks you bend into shape yourself to hook underneath the trailer. We were not sure we liked that arrangement at first, but it seems to work well holding the sides of the cover down and in place. We used the frame of the trailer as much as possible to hook onto rather than just the bottom of the sides. The instructions said not to pull the bungee sections tight but to leave a little spring in them so they have some give when the wind blows the cover. I think the reason is if they were tight with no give, the wind might possibly rip the tie-down from the cover. The back straps used to tighten it work very well, but since our trailer is a V-nose, we had to fudge with the straps on the front to snug it down as tightly as possible, so we added another bungee strap to hold down the excess fabric of the front corners. The whole installation took two of us a little over an hour, but next time should go faster now that we have it figured out. We wondered how well it would all hold, but this past week we had sustained winds of 35-40 MPH with gusts of 55 MPH for over 24 hours, and the cover hardly even moved. All you could see was the sides poofing out slightly and then the air vent flaps would lift and let the excess air out, so the top never ballooned up at all! It also rained very hard and the cover just beaded up the water and it ran off. The main trick is to take your time and get it snugged down with no loose, baggy, flapping areas where the wind can get under it. Now we have no doubt it will also hold up just fine to the cold winter snow and winds here in Michigan!



by:

Bought this to cover my Northstar 850 SC pop-up Cab over Camper. Worked perfect. Exactly what I wanted it to do.



by:

I just finished putting this cover on for the second season and you would have thought it was brand new. Wisconsin winters are harsh and this cover works perfectly. The little bags you fit with rocks that help get the straps under the RV are a great addition. Thank you etrailer for all you do for your customers.



by:

Of course I must start by saying that etrailer's customer support is second to none. It is always a pleasant experience to order from etrailer.com.
I am very pleased with the design and quality of this Camco camper cover. The material seems to be of very good quality. The air vents at the top are a smart design feature which allows air to escape from the cover when the wind blows. The top portion is designed with some overhang that acts as a drip edge which sheds water away from the sides. Very good design! The fasteners seem to be of good quality and there are velcro ties for each of the 4 jacks that support the truck camper. It fits pretty well on the my Lance 915, although I was having a little trouble keeping the front portion on the cab-over from coming off. I ended up adding a couple straps from the front fastener to the 2 front jacks to help keep it in place. As with any cover, the main enemy is wind. It can tear apart a cover under the right circumstances. The trick is to keep it tight enough that it's not flapping in the wind but not too tight such that it puts stress on the friction points. I do wish there were more tie down points at the bottom and under the cab-over. I"m thinking of getting a kit that cuts eyelets and add some more points for tie downs at the bottom edges. The zippers for the door are of good quality. I might consider adding a dowel or something to the bottom of the zippered door opening to make it easier to roll up the door opening. Kind of difficult to get it to roll up reasonably well by yourself. With 2 people, it would roll up nicely. Overall, I don't think I could find a cover that would fit any better without getting a custom made cover, which would cost 2 or 3 times as much. This cover is a very good investment and I would definitely recommend it.



by:

The cover was sewn incorrectly. The all four side are skewed with the roof about 12" counterclockwise making the fit very poorly.



by:

I bout this cover one year ago, to protect camper during the winter.
Works well, it was snowy and windy but camper and cover have very good condition.
Thank you for fast shipping and quality of cover.



by:

The biggest headache was to locate the front and rear. Unfortunately, had to unfold on the ground to determine and refold to put back up on roof; and at that time, tore a small part of the covering. There were no instructions when it came to the two, long rolled up straps. I did thread one of the straps thru the loops at the bulkhead and tied it down, and the other to the underside of the back of the 5th. Overall, it's a great cover and happy with it.



by:

This is a good cover, though not as durable as I'd hoped. I managed to put some small tears in it while removing ice and snow from on top. It came with a small repair kit that was adequate for the repair.
The cover easily goes over the spare tire and battery box and has elastic to hold it snug. I especially like that it came with a throw-bag for easily tossing the straps under the trailer. The four straps work very well to secure the cover even in high winds.
I folded and placed terry cloth towels on the four sharp corners of the trailer to keep the cover from wearing thru at the corners. This has worked well.



by:

First of all your 'product image' photo does NOT match what you are selling.
I made my own gutter covers from 3.5" pieces of pool noodles. I'm not certain why directions tell you to turn it inside out...when I got it on the roof, I had to struggle to turn it right side out. We have a solar panel and AC unit that put some strain on the way it fits. There is no velcro around the camper jacks as one reviewer stated. We live on a lake where the winds howl 25-30 mph at times. I'll post photos in the spring. Hopefully it will hold up as it seems to be reinforced and quality material.



by:

I'm not real happy with the way the cover fits on my fifth wheel. I tried for several hours to adjust the cover. I'd give this one a poor rating.The front does not hang properly and when attempting to adjust it the rear has excessive covering that I had to tuck up over the bumper.



by:

The cover was well made and materials of high quality. Seemed as good as a cover we were replacing that cost a lot more. Can’t vouch for the durability as we traded it for another camper that became available 2 weeks later. I can say that e-Trailer has been top notch with each purchase we have made!!


25
25

See what our Experts say about this Camco RV Covers

Do you have a question about this RV Cover?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Rachelle B
Written by:
Rachelle B
Employee Jacob W
Updated by:
Jacob W
Employee Adam Y
Updated by:
Adam Y

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.