Would the Camco UltraGuard 5th Wheel Cover CAM45751 fit a 26.5 Foot Long Trailer

Question

Question:

My trailer is 26foot 1/2inch will this cover it completely?

asked by: DAVID M

0

Expert Reply:

The full dimensions of the # CAM45751 are 26' long x 110" wide x 110" tall (front) x 98" tall (rear). Your trailer being 6 inches longer than 26 feet wouldn't be a problem. The cover will fit pretty tight but it will still fit.

expert reply by: Jameson C

0

Answer 1

Do you mean that the inside of the tread (the half closest to the trailer) is wearing unevenly? Or are you speaking of the inside sidewall? Many things can cause uneven tire wear, including a bent axle, an overloaded trailer and worn or broken…

view full answer...

Answer 2

I reached out to my contact at Lippert and the Equa-Flex equalizers you have on your Grand Design Momentum Triple Axle Trailer do not have a mileage rating, but instead just get replaced when they are worn. I would take a close look at the equalizers…

view full answer...

Answer 3

Most trailer leaf springs will have a bushing in the eyes of the spring. It is interesting that the install video we have for the wet bolt part #126B2 that you referenced does not have a bushing involved at all. In reality all that really matters is…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 6

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 9

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

The Lippert Equa-Flex #LC145546 is the closest cushioned equalizer from Lippert to fitting your Grand Design 2800BH. This particular kit is rated for 5K-8K axles. The MORryde CRE3000 #MR27ZR is going to be the best option for your camper. While this…

view full answer...

Would the Camco UltraGuard 5th Wheel Cover CAM45751 fit a 26.5 Foot Long Trailer

Product Page this Question was Asked From

Continue Researching