Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen
(146 reviews)
Price: $431.90
In Stock
Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen
Item # ASA57YR
Retail:$599.99
Our Price: $431.90
You Save: $168.09
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (146)
- Q & A (0)
- Photos
Voyager RV Camera System - ASA57YR
- Backup Camera
- 7 Inch Display
- Voyager
- Built-In Microphone
- Mirrored Image
- Night Vision
- Waterproof
- 1 Camera
- Suction Cup Mount
- Below Rear Clearance
Wireless camera has WiSight technology that gives you real-time, crisp video while you're backing into the crowded campsite. Built-in microphone and speakers help you communicate with a friend outside your RV as you back into a tight space.
Features:
- Wireless backup camera system improves rear-view visibility for your RV or camper
- Minimizes blind spots and helps prevent accidents
- Supports up to 4 wireless cameras (additional cameras sold separately)
- WiSight 2.0 technology digitally transmits high-quality, uninterrupted signals up to 60' away
- Provides real-time video footage at highway speeds
- Eliminates interference from smartphones, routers, and other devices
- Included CMOS camera creates digital video in full color
- 115-Degree wide viewing angle gives you optimum visibility while in reverse
- 14 Infrared LEDs surround the camera lens to provide nighttime vision up to 30'
- 7" Full-color LED monitor displays 1, 2, or 4 cameras simultaneously
- Brightness, color, contrast, and image orientation can be easily adjusted
- Color-coded, rear assist marker lines show distance from other objects
- Integrated microphone and speaker make it easy to get help backing up
- Microphone on camera picks up your friend's voice outside the RV
- Speakers on monitor let you clearly hear your friend's instructions
- Durable metal housing is waterproof and dust resistant
- IP69-rated to protect against close-range, high-pressure spray downs
- Simple installation - minimal drilling required
- Monitor suction cups to your dashboard or windshield
- Voyager pedestal mounts (VOSHD4MNT, VOSHD6MNT - sold separately) for permanent mounting
- Camera mounts to the rear of your RV or camper
- 1 Camera, monitor, WiSight standard connector, 1 monitor mount, 12V DC power cord, and mounting hardware are included
Specs:
- Monitor:
- Overall dimensions: 7-7/8" wide x 5-5/16" tall x 1-3/16" deep
- Screen size: 7"
- Resolution: 800 x 480
- Voltage: 12V - 24V DC
- Camera:
- Overall dimensions: 2-3/4" wide x 2-1/4" tall x 2-3/8" deep
- Mounting hole spacing (center to center): 1-13/16"
- Camera resolution: 520 TV lines
- Wireless range: 60'
- IP rating: IP69K
- Voltage: 12V DC
- 1-Year warranty
Note: Not compatible with first generation WiSight technology products.
After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wireless backup camera system gives you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.
Enjoy Uninterrupted Wireless Signals
The WiSight 2.0 technology digitally locks the camera and monitor together, transmitting strong, interference-free signals up to 60'. This means that you'll have sharp, real-time video footage whether you're on the road or at the campsite, and you are less likely to have interference from smartphones, routers, and other devices.
Easily Communicate from Outside Your RV
Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.
Avoid Collisions While Backing Up
No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.
And depending on your camera setup, this system allows you to add up to 4 cameras (additional wireless cameras sold separately) and view 1, 2, or all 4 angles simultaneously. This is great for when you're backing up at the campground or changing lanes on the highway, as it'll let you keep an eye on everything going on around your RV without needing assistance from others.
And because this camera has 14 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 30' should you arrive at the campsite after dark and need to back up into your parking spot.
Withstand Multiple Climates and Environments
If there's a torrential downpour, or if you just simply need to wash your RV, the waterproof, IP69-rated camera will be protected against close-range, high-pressure spray downs. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.
Installs Onto Your Dashboard and RV Rear
This camera system includes 2 different mounting options for the monitor, depending on how you want to display it on your RV's dashboard. If you want to be able to re-position the monitor later on, stick the camera onto the dashboard with the included suction cup. Or, if you want a more permanent mounting solution, drill one of the Voyager pedestal mounts (VOSHD4MNT, VOSHD6MNT - sold separately) into the dashboard. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.
Because this system is wireless, installation is much easier than it would be with a wired system, as you'll only need to do minimal drilling and wiring. Just bolt the camera down with mounting hardware (not included) and connect to your RV's wiring system. If you intend to use this system only for backing up, wire the camera to the reverse lights. If you prefer to use it to keep an eye on your rig on the highway, wire the camera to the running lights.
WVSXS70 Voyager WiSight 2.0 RV Wireless Backup Camera System - Night Vision - Suction Cup Mount - 7" Screen
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Defective
- Did not arrive in time
Customer Reviews
Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen - ASA57YR
Average Customer Rating: 4.5 out of 5 stars (146 Customer Reviews)
Wireless camera has WiSight technology that gives you real-time, crisp video while you're backing into the crowded campsite. Built-in microphone and speakers help you communicate with a friend outside your RV as you back into a tight space.by: John 04/22/2024
Replacement for a first generation system that came with our 2016 Airstream camper. Camera identical but screen is larger, much improved and more customizable. Works great for driving/towing and tight backup situations. Questions and advice I received from etrailer.com before purchase very helpful and best price I could find online.
by: Fred10/06/2022
This is a Great product and a Great value. I could have used my old wire but decided to try wireless and the range is excellent. The rear view is excellent. I was able to set the angle to see my trailer hitch receiver and see over what I am towing behind the motorhome. I used a 3x8x1/8-inch aluminum plate (purchased elsewhere) to mount this camera.
by: Ed Kist12/13/2023
Thanks Chelsea & etrailer for the recommendations & prompt shipping. Tech came thru answering an installation question. Thanks again.
by: John07/27/2023
I bought this camera as a replacement for my original version 1 camera, hoping it would give me less signal drop at highway speeds when using it as a rear-view camera. Unfortunately, it was no better in that regard; I had to move the antenna forward with an extension to solve that problem. While the camera does have circuitry to avoid issues with PWM, I've had to have warranty replacement already due to the camera suddenly failing. And the replacement sent by Voyager/ASA also failed after only one outing. I don't know if they got a bad batch of parts or what, but I certainly can't recommend this product.
by: Caremlita10/17/2023
The installation was done by a mobile RV repair service. It went efficiently and paired easily.
by: Walt 06/19/2023
Replaced voyager version that succumbed to water intrusion on the camera side. Wanted the larger screen and updated refresh rate. Works better than anticipated. Use it primarily for driving and seeing what’s behind me beyond the mirrors. Works great.
by: Patrick 02/08/2023
Great product. Fantastic service
by: Steve08/30/2022
I am having issues with the plug staying back in the monitor. In my opinion poor design. I have had to tape mine so t doesn’t fall out. It just doesn’t seem to securely stay in.
Jenny N.
9/22/2022
I reached out to the manufacturer and this is not common issue that they have had however they will reach out to you.
by: Lois11/22/2022
Does not have manual for monitor operat ion
by: Gerald 02/03/2024
by: Stephen 08/16/2023
by: Mitchel 05/04/2024
by: David03/28/2024
by: Brent 05/16/2024
by: Robert 08/16/2022
by: Ashley 09/09/2023
by: Sherri 03/30/2023
by: Brian 02/13/2023
by: Leon 08/10/2022
by: Richard12/13/2023
by: Timothy 08/05/2023
by: William 03/31/2023
by: Cecil03/18/2023
by: Thomas 01/30/2023
by: PNWtim06/14/2023
I installed this on my Airstream Bambi just above the license plate. Removed license plate light to expose light power wires. Drilled a large hole to fit the rubber grommet using a step drill, then drilled two small mounting screw holes using bracket as hole drill template. Fed the assembled camera connector through the large hole and pulled the camera connector wires out the license plate light wire hole. Solder camera connector wires to license plate light wires (confirm polarity) and stuffed all wires back into hole. Installed grommet and camera bracket sandwiching the grommet between the back of the camera bracket and trailer siding for a water proof seal. Camera paired first try. Be sure to power only the monitor on first, wait for screen prompt, then turn on camera using trailer lights. Camera image is crystal clear and I've not noticed any image lag. It's been great so far.
25
145
Show More Reviews
See what our Experts say about this Voyager RV Camera System
- Does Voyager PWM Filter Only Work with Furrion RV CamerasThe purpose for the Voyager PWM filter # VGR64VR is not limited too just the Furrion camera setups. It's mostly for the newer GM trucks that are really difficult to use with the RV cameras. If you have a newer GMC or Chevy truck you would want to also get this harness with the Wisight setups like the part # ASA57YR but if you have a different truck you wouldn't need it.
view full answer... - Replacement Wired Color Camera and Monitor System to Replace a Welded Camera SystemThank you for the additional camera/monitor information. We do not carry the Welded brand of cameras and monitors and therefore I have limited information/knowledge available. We do have a few camera systems that are wired and not wireless. The Rear View Safety Backup Camera System # RVS-7707721 is a colored camera/monitor and has a 7" monitor. This camera system does have a different pin configuration than your Welded camera so you would need to run the new wire or splice it into your...
view full answer... - Does Voyager WiSight 2.0 Wireless Backup Camera Work on Trailer That is Not Pre-WiredAbsolutely; the Voyager WiSight backup camera you referenced will work on your trailer even though it is not pre-wired. The correct part number for the camera system is the following: - Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA57YR You'll mount the # ASA57YR camera to the back of your trailer, and it simply gets wired to 12 volt power with the included connectors. The monitor will then plug into your tow vehicle's 12 volt (cigarette lighter), so the set up is quite simple....
view full answer... - Solution for Replacement Monitor for 1st Generation Voyager WiSight Camera WVH100The Voyager # WVH100 is the first generation camera that has been discontinued. Unfortunately, this is not compatible with any of the new WiSight 2.0 monitors and the old monitors are no longer being produced. The only solution is to replace the system entirely with the # ASA84YR (4.3" screen) or # ASA57YR (7" screen).
view full answer... - Is There a Replacement Monitor for the Voyager WV0S511 Camera SystemI spoke with Voyager about the Voyager Monitor WV0S511 and they informed me that this is no longer available and there is no direct replacement for this that will allow you to use your existing camera/cameras. Therefore, it will need to be replaced and for this they recommended the Voyager WiSight 2.0 Wireless RV Backup Camera System part # ASA57YR which is a wireless system so there is no wires run between the camera and monitor.
view full answer... - Can The Furrion Vision S Prewired System Be Switched to Us Voyager WiSight Camera System? Yes, you can remove the Shark Fin Camera Mounting Bracket # FRCBRKT-BL which includes the wiring from your 2024 Forest River Flagstaff Super Lite 26FKBS for a Voyager system. The Kit # ASA24YR you found is specifically designed for trailers pre-wired from the manufacturer for the WiSight. Instead you will want the 4.3" System # ASA84YR or 7" System # ASA57YR which includes the wiring needed to splice into the wiring when you remove the Furrion wiring.
view full answer... - Back-Up Camera With a 7" Monitor That Can Be Used With Current Camera WiringWe do have a back-up camera that has a 7" monitor included. - Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR I am not completely sure what camera system you currently have but you can still use your current wiring. The Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR would just need to be sliced in, instead of using the plug. If you can provide me with a photo or what camera system you currently have, I would be happy to look...
view full answer... - Recommended Backup Camera Upgrade for a 2023 Airstream Rangeline The Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR you're looking at is a great choice and would be a nice upgrade to the previous Amazon systems. If your Airstream is not pre-wired then you have no choice but to hardwire it into your factory wiring. This camera system, would just need to be spliced into your reverse light circuit and you'll be good to go. The in-cab monitor just uses a standard 12v cigarette lighter to power it, so there won't be any additional...
view full answer... - Recommended Rear View Camera System for a 2018 GMC Sierra 2500 I was not able to find the RVC back up camera you're referencing, however I was able to find the Rampage Wireless Backup Camera for Smartphone or Tablet # RA7710 which will sync to your smartphone and create a backup camera system for your truck. If you're meaning to say that you want to add a backup camera system for your trailer that will be compatible with your truck, then I'd recommend checking out the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR which...
view full answer... - Would The Voyager WiSight 2.0 Work For Both An Enclosed Trailer And Truck Bed Camper Yes, the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR would be able to splice into your running light circuit to power the rear camera, it even comes with butt connectors already on the wire harness to make integration with your factory wiring faster. The monitor for this system can pair with up to four cameras so you could just get a second camera # ASA64YR to wire into the running light circuit on the truck camper and then move the monitor to whichever...
view full answer... - Will The Voyager Rear Camera With LED Low Light Assist Work With An Older Voyager Monitor?Unfortunately no, the Voyager Monitor WVOS511 is not going to work with # VCMS17B. Your options are going to be pretty limited now, so I'd recommend just replacing the entire system with the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR. This is a brand new system that includes a 7" LED monitor that can support up to 4 cameras, 1 brand new camera that has a 115 degree viewing angle, and all the mounting hardware needed for install.
view full answer... - Recommended Voyager Back Up Camera System To Replace Discontinued Voyager Kit On 2010 Itasca SonovaI have a complete replacement back up camera system option for your 2010 Itasca Sonova 30' Class A Camper, but your current Voyager camera and monitor has been discontinued. I recommend replacing the camera and monitor with the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR which is a modern wireless camera option that includes a a new back up camera, and a new 7.0" monitor. This system includes one camera, but you can add up to 3 more of the # ASA64YR...
view full answer... - Recommended Camera System To Replace Discontinued Jensen VCC130BI have a complete replacement camera system option for you, but unfortunately your current VCCS130B camera has been discontinued and there is no compatible camera still made. While it's not what you're hoping to hear, I recommend replacing everything with the new version which is the Voyager # ASA57YR. This has a new 7" Screen you'll need to use, and just swap out the old camera with the new one. It will be a pretty easy change over since you already have a camera installed. I included...
view full answer... - Comparing Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision Part NumbersThe Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR we have on our site is the same as the part WVSXS70 that Voyager lists on their site. We started making our own unique numbers once we started carrying more products since there can be some overlap between manufacturers at times.
view full answer... - Recommended Replacement Camera System for an Older Voyager WVOM541AP Monitor Unfortunately no, since Voyager released their new generation of cameras they are no longer compatible with older monitors. That being said, you're going to have to replace the entire system with the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR. This system can support up to 4 wireless cameras, includes a 7" full color LCD monitor, and can digitally transmit high quality uninterrupted signals up to 60' away.
view full answer... - Replacement ladder Option For A 2004 Tiffin Allegro Bus MotorhomeThe exterior RV ladders that we sell are all cut-to-fit universal ladders so replacement most likely wouldn't be a simple swap out. The Stromberg Carlson Exterior RV Ladder # LA-401BA that we offer is 99-1/2" tall and would have six points to mount to the wall and 2 points to mount to roof of the motorhome. If you can't get an OEM replacement from Tiffin and you have to go with a universal-fit ladder then you'll want to reach out to the Tiffin to see if you can get a diagram of the framing...
view full answer... - Recommended Quad View Camera for Tiffin Allegro Red MotorhomeThe Voyager WiSight 2.0 Wireless RV Backup Camera System part # ASA57YR is what I recommend for a quad view capable monitor. It has a very large 7" monitor so you can get a pretty clear view of each camera. The monitor is also both full color and has a built-in speaker so you can hear what's going on outside the motorhome. The additional camera can be purchased using the Voyager WiSight 2.0 Wireless RV Backup Camera part # ASA64YR.
view full answer... - Replacement Camera System For Voyager WiSight WAOM562 MonitorThe Replacement Voyager WiSight 2.0 Wireless RV Backup Camera with Low Light Assist # ASA64YR will only work with the WiSight 2.0 monitors. The new cameras and monitors are not backwards compatible as Voyager no longer produces a camera which is compatible with your WAOM562 monitor. You can use the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Low Light Assist # ASA57YR to upgrade both the monitor and camera for your 2016 Airstream FC 25.
view full answer... - Camera Observation System that Fits Pre-Wiring of Winnebago 2108DS RVYes, since your Winnebago 2108DS was pre-wired for a Voyager RV camera setups the # ASA37YR is the correct kit you'd want.
view full answer... - Is There Sidemarker Cameras Available For The Voyager WiSight 2.0 RV Camera SystemThe Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA57YR does not have currently have sidemarker-type cameras that are compatible with this specific system so you would need to purchase the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera # ASA64YR to add additional cameras.
view full answer... - Is Voyager Camera VCMS17B Compatible With Voyager WAOM562 MonitorHi Brad; I went directly to Voyager to find the answer, and they said the Voyager Rear Camera # VCMS17B is not compatible with the WAOM562 monitor, and there isn't a camera that is made that will work with your monitor. I know this is not the answer you were looking to hear, but if your camera does not work anymore you'll have to replace the system, which you can do with the Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA57YR.
view full answer... - Is There a License Plate Camera Compatible w/ a Voyager WiSight 2.0 Wireless RV Backup Camera SystemIf you are asking about adding a license plate camera to the Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA57YR, the answer would be no. There is not currently a license plate camera compatible for that system. The license plate camera systems we currently have like the Rear View Safety Backup Camera - License Plate Mounted # RVS-778 are not wireless and would require an additional monitor that accepts an AV input.
view full answer... - Do You Have a Replacement Camera That Is Compatible With Voyager Monitor WVOM541AP?You are going to need to replace your system with the Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA57YR as this is the new generation of cameras Voyager switched to. This system uses a stronger signal allowing it to travel up to 60' with virtually no lag time.
view full answer... - Recommended Replacement Camera System For The Discontinued Voyager VOM 73SNWINThe Voyager VOM 73SNWIN has been discontinued for quite some time. Since then, Voyager has made some major changes to their technology, so I am afraid that there are no options for a replacement camera that will work with your current setup. Our recommendation would be to go with a complete replacement camera system. For that I recommend the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR. This will get you a brand new camera and full color 7" monitor. You...
view full answer...
Do you have a question about this RV Camera System?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Mary K
Updated by:
Wilson B
Edited by:
Amanda M
Written by:
Adam Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Fred
1/19/2023
This camera is working great. I am glad I went wireless.