Is There a Replacement Monitor for the Voyager WV0S511 Camera System  

If you were told your trailer was pre-wired, there would be a mounting plate and plug that would allow you to just connect a plug-in camera system. If that mount and plug is not there, I wouldn't assume the wires are there, though you can…

The Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long #RP45292 or the Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long #C45048 will work for your truck and…

The distance from the rearmost hitch pin hole of the Reese hitch extender part #RP45292 to the back of the extender is 6 inches which you can use to determine if that would hit your spare or not. This was designed to be trimmed down in length though…

I have a complete replacement camera system option for you, but since your current camera system is no longer made there are no replacement cameras available that use your same monitor. I recommend replacing it with the Voyager WiSight 2.0 Wireless…

There isn't an adapter to connect the wiring of a Furrion camera to a Voyager. With that said you can pretty easily just cut the connectors off and then connect to the camera since it's only two wires.

I took a look at your Voyager WiSight RV Observation Camera - Wireless #WVH100 and the Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor #ASA27FR you mentioned you have, and it actually does not appear that these two are compatible…

The Voyager WiSight 2.0 Wireless Backup Camera System part #ASA24YR (WVSXP43 ) is what replaced the WVHS43 so you can be rest assure you are getting the newest, most up to date system from Voyager.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…