Product Experts Available Now!
Call 1-800-940-8924
Replacement End Cap for Stromberg Carlson Exterior RV Ladders - Qty 1
(271 reviews)
Price: $15.75
In Stock
Stromberg Carlson
Replacement End Cap for Stromberg Carlson Exterior RV Ladders - Qty 1
Part Number: 8540-CP
In Stock
$15.75
Retail:$27.00
You Save: 42%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (271)
- Q & A (0)
- Videos (1)
- Photos
Stromberg Carlson Accessories and Parts - 8540-CP
- RV Ladders
- End Caps
- Stromberg Carlson
Replaces 1 end cap for your Stromberg Carlson exterior RV ladder. Fits Stromberg Carlson LA-401 and LA-401B exterior RV ladders. Includes 3 screws.
Features:
- Replaces 1 end cap for your Stromberg Carlson exterior RV ladder
- Fits Stromberg Carlson LA-401 and LA-401B
- Includes 1 end cap and 3 screws
Fits:
- Stromberg Carlson exterior RV ladders: LA-401 and LA-401B
8540-CP Stromberg Carlson Replacement End Cap for Exterior RV Ladders - Qty 1
Video of Replacement End Cap for Stromberg Carlson Exterior RV Ladders - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for A Closer Look at the Replacement End Cap for Stromberg Carlson Exterior RV Ladders
So we're going to take a quick look at the replacement plastic ladder rung end cap on a Stromberg Carlson RV Exterior Ladder.So if you cap got damaged or broke off, this is going to be a direct replacement for the ladder rung, to make sure that that edge doesn't have any sharp points to catch your clothes or catch any other items as you're using the ladder. Makes it a little bit safer to use.So get the plastic end cap to replace one side on one rung, and then the hardware to get that installed. We'll have our two smaller screws, and then the longer self-tapping screw to go in the center.And this is designed to use with the Stromberg Carlson Exterior RV Ladder, part number LA-401 or LA-401BA. So all you'll really need to get this installed is a Phillips head screwdriver. Should match up with all three of those screws, and you'll be back out on the road in no time.The cap from edge to edge measures about 2" long, and then about 1" wide. Stands about 5/8" deep, and then our longer bolt from bottom of the head to the end of the bolt is about 2".And that's going to do it for our look at the replacement plastic ladder rung end cap for the Stromberg Carlson RV Exterior Ladder..
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
4.8
271 reviews
by:
Bonnie
10/25/2026
perfect fit and extremely fast shipping
by:
MC Dip
05/03/2026
They are direct factory replacements for the original. Expensive, but glad the parts are available. If the ladder rungs move one of the sides is cracked and needs replaced.
by:
John M
12/12/2019
I was very happy to find this part a year ago. Etrailer is the only place I could find that has it. I ended up buying about eight or so. It did save me from scrapping my ladder. Unfortunately, the screws that come with the product are not the same as the originals: They rust. I wish I had known this before, I thought I was doing the right thing, throwing away all the old screws and replacing it with the new ones. Such a disappointment to utilize the rear of the coach only to be looking at rust stains.
I expect the plastic to last as long as the old ones before they crack; about 13 years.
I would say if you need it for safety; get it, but reuse your old screws.
The pictures show the etrailer oxidized screws and the original 14 year old screws non-oxidized.
I expect the plastic to last as long as the old ones before they crack; about 13 years.
I would say if you need it for safety; get it, but reuse your old screws.
The pictures show the etrailer oxidized screws and the original 14 year old screws non-oxidized.
by:
Jeffery
06/07/2026
Your service and response times are outstanding! It's a pity these particular parts are so ridiculously expensive. I'm amazed someone isn't make a knock-off.
by:
Michael W.
10/18/2026
Fit and finish like the original. I would buy them again.
by:
Robert P.
08/13/2017
Used to replace failing end caps on my RV ladder apparently made by Kemberly Inc, of which I can not locate. The Stromberg Carlson are exact match except for the shorter screws, the new ones are slightly larger. I just used the old short screws instead of the new ones. Saved me from buying a new RV ladder
by:
Renee
08/09/2026
The screws you provided did not fit. They were too fat. I had to use my old screws.
by:
Eric
01/30/2019
Bought these replacement parts for my 2008 Montana mountaineer rv ladder. Was climbing the ladder when I heard a pop and noticed a crack in the plastic. The replacement part works great, fit as expected. Bought a couple extra for the next one to go.
by:
Christopher
08/17/2022
2006 Sunseeker 2860DS ladder end caps needed replacing. Originals were stamped Kemberly. These were a perfect fit, bought 14 for all 7 rungs, so many were damaged.
Screws are pan head and the end caps counter sunk to fit perfectly. Main screw .25" longer than OEMs, side screws slightly longer than original too.
Using ladder with confidence again.
Screws are pan head and the end caps counter sunk to fit perfectly. Main screw .25" longer than OEMs, side screws slightly longer than original too.
Using ladder with confidence again.
by:
Joshua
07/27/2026
EXACTLY WHAT I NEEDED FAST!
by:
Earl
06/28/2026
They went on and they worked perfect
by:
Kyle
06/06/2026
Perfect fit easy to replace
by:
Linda
12/25/2020
Fit my aftermarket truck camper ladder perfectly
by:
John
11/17/2017
Very user friendly ordering process. Parts arrived in a timely manner.
The experience was fantastic.
The experience was fantastic.
by:
Scott
05/10/2026
Fits perfectly.
by:
Shane
03/15/2026
Product was a little pricey but a perfect fit and easy to install.
by:
Steve
02/07/2026
Great product, worked like advertised
by:
Brian
09/20/2024
Worked great and is still like new, great product
by:
Nick
06/18/2019
Quick shipping. Would buy again. No other choice. These are ok.
This item fits properly.
It seems to be made of plastic and I've had the ladder end caps for a year and seem to hold up. I am not sure if these will last as long as the original ones. I hated the screws included. They are black oxide dipped and will obviously start rusting soon after installation. I don't like the rust stains on my RV. I had to replace them with stainless steel screws. Overall, they are ok, but I couldn't find any to replace my old ones but these. Better than using the old ones. I sure wished they were machined aluminum.
This item fits properly.
It seems to be made of plastic and I've had the ladder end caps for a year and seem to hold up. I am not sure if these will last as long as the original ones. I hated the screws included. They are black oxide dipped and will obviously start rusting soon after installation. I don't like the rust stains on my RV. I had to replace them with stainless steel screws. Overall, they are ok, but I couldn't find any to replace my old ones but these. Better than using the old ones. I sure wished they were machined aluminum.
by:
Bob
09/07/2018
This was a replacement for the same part that had failed on the ladder on my RV. So, it was a direct replacement and worked just as it was intended to work.
Bob
9/7/2019
It is still working great.
by:
Ted
04/24/2021
Replacement ladder rung end came quickly and installed easily with the provided new screw hardware. Works great and now I have a few more that are decomposing after 10 years of OEM service on my 2011 coach.
Ted
4/24/2022
Still working great after a year
by:
Nathan
04/21/2025
The replacement parts arrived quickly after ordering. The fit was perfect. The price per part (I needed 8) was surprisingly steep, however $150 is much better than the cost of risking a fall when the plastic brakes completely!
by:
Happy camper
06/09/2018
Great product would recommend them to anybody easy to install and fit perfect
by:
Jean
10/21/2023
A very necessary part - many on our ladder were cracked. Expensive but not nearly as bad as replacing the whole ladder.
Jean
10/22/2024
Ladder is probably original to our 2005 newmar & this repair will likely last another 10 years
by:
David R.
07/23/2019
I recently bought a used 5th wheel camper and noticed the end caps on the roof ladder rungs were broken. I ordered these replacement caps without knowing the actual ladder model number and they fit perfectly in my ladder. They saved me money by not needing to replace the entire step and just repairing what was actually broken.
25
271
true
Show More Reviews
See what our Experts say about this Stromberg Carlson Accessories and Parts
- Recommended Replacement to Replace Kimberly Ladder End CapsHey Darrell yes, the Replacement End Cap for Stromberg Carlson Exterior RV Ladders # 8540-CP can be used to replace the older Kimberly ladder end caps. Attached is a review from a neighbor who used these caps to replace their Kimberly ladder end caps and said it worked great! If there is anything else I can do for you, please feel free to drop a comment and let me know!
view full answer... - Dimensions of Replacement Plastic Endcap for Ladder Rung on Stromberg Carlson RV LadderThe Replacement Plastic Endcap for Ladder Rung on Stromberg Carlson RV Ladder # 8539-CP does not appear to be the same as the one in your picture. Your picture shows a screw where the logo is located on the # 8539-CP. I cannot confirm if this would fit for you or not. I can provide you the dimensions of this cap and another that we carry and you can see if it will fit. - Replacement Plastic Endcap for Ladder Rung on Stromberg Carlson RV Ladder # 8539-CP (2" long x 1/2" wide x 1/4" deep) -...
view full answer...
- Will Stromberg Carlson RV Exterior Ladder End Cap Fit Kemberly LadderThe Replacement Plastic Ladder Rung End Cap, part # 8540-CP is designed to fit Stromberg Carlson RV exterior ladders so I cannot confirm that it will fit your Kemberly ladder on your 2010 Montana fifth wheel. These caps measure 2-inches long, 5/8-inch wide, and 1-inch tall but since the cap is contoured these are approximate. You can check the measurements of your cap and may find this will work for you.
view full answer... - Dimensions Of Stromberg Carlson RV Exterior Ladder Rung End CapI cannot confirm that the Replacement Plastic Ladder Rung End Cap on Stromberg Carlson RV Exterior Ladder - Qty 1, # 8540-CP will fit your Kemberly Inc. RV ladder. However, the rough measurements are 2 inches in length by 5/8 inch wide and 1 inch deep. With this being a contoured piece, the measurements are close and hopefully enough for you to determine if it will fit or not.
view full answer... - Replacment Plastic Endcap For Stromberg-Carlson RV LadderThe replacement endcap for the ladder rung on your Stromberg-Carlson 8540-NT is part # 8540-CP. This replacement endcap will also fit the 8540-NTB ladder as well.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video Edited:
Kathleen M
Expert Research:
Jeffrey L
Updated by:
Mary K
Updated by:
Mike S
Updated by:
Michael B
Written by:
Wilson B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brian
9/21/2025
Great