Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Replacement Filler Cap for the HBA Series Hydrastar Actuators. Now this is a hard, black, plastic replacement filler cap. It fits on the Hydrastar HBA Series Actuators. Comes with the included rubber seal that goes in the cap, and this is the seal the cap to the filler tube opening on the actuator. This part is for a quantity of one. What I'm going to do now is try to zoom out a little and show you .. I happen to have, I pulled one of the Hydrastar HBA Series Actuators.
If you can see on the very top, this one is missing the cap. Here's the filler tube opening, right here where the break fluid goes in. You can see it's missing a cap, this part is the cap that we're just . You can see there's three tabs, you just lined it up here. Then you just push down and then turn it.
As you turn it those tabs will lock under each other and then it locks in, seals into places. Then to open it, just rotate it, pop it right off. Simple as that. That should do it for the review of the Replacement Filler Cap for the HBA Series Hydrastar Actuators.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Benjamin
1/25/2019
Exact fit
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jl
8/22/2018
Still works great!