bing tracking image
  1. Propane Fittings
  2. MEC
  3. Hoses
  4. Pigtail Hoses
  5. 1 Foot Long
  6. 1/4 Inch - MIF
MEC RV Propane Pigtail Hose - ACME Nut x 1/4" Male Inverted Flare - 12" Long
MEC

MEC RV Propane Pigtail Hose - ACME Nut x 1/4" Male Inverted Flare - 12" Long

Part Number: MEC35CR
In Stock
$28.70
Retail:$37.20
You Save: 23%
Propane Fittings
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Your automatic changeover regulator needs a pigtail from each propane cylinder. This 12" hose connects a Type I cylinder valve to a 1/4" female inverted flare inlet, supplying propane to your RV's regulator. Great Prices for the best propane fittings from MEC. MEC RV Propane Pigtail Hose - ACME Nut x 1/4" Male Inverted Flare - 12" Long part number MEC35CR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1)
  • Q & A (0)
  • Videos (1)
  • Photos

MEC Propane Fittings - MEC35CR

  • Hoses
  • Pigtail Hoses
  • 1 Foot Long
  • 1/4 Inch - MIF
  • Type 1 - Female
  • MEC

Your automatic changeover regulator needs a pigtail from each propane cylinder. This 12" hose connects a Type I cylinder valve to a 1/4" female inverted flare inlet, supplying propane to your RV's regulator.


Highlights

  • Connect Tank to Changeover Regulator: Supplies propane from the cylinder to the regulator.
  • Made for RV Propane Systems: Green Type I connector supports up to 200,000 Btu/hr.
  • Connect Without a Wrench: ACME handwheel threads onto the propane cylinder valve.
  • Match Your Regulator Inlet: 1/4" male inverted flare fits a compatible female inlet.
  • Made for Propane Service: Thermoplastic hose is UL and CGA approved.
  • Replace One Pigtail: Includes 1 hose for replacing either cylinder connection.
Made in USA


Features to know about

Replace a Propane Cylinder Pigtail on Your RV

MEC 12-Inch Propane Pigtail Hose for RV Changeover Regulator

When one of the pigtails connecting your RV propane cylinders to the changeover regulator needs replacing, this 12" hose restores that connection. The green Type I ACME handwheel tightens onto the cylinder valve without a wrench, and the 1/4" male inverted flare connects to a compatible regulator inlet.

Specs

Capacity:

  • Flow capacity: 200,000 Btu/hr

Connections:

  • Cylinder connection: green Type I ACME nut
  • Regulator connection: 1/4" male inverted flare

Hose:

  • Length: 12"
  • Inside diameter: 1/4"
  • Working pressure: up to 350 psig
  • Pull test rating: 400 lbs

Package:

  • Quantity: 1 hose


MER425-12P Marshall Excelsior (MEC) LP Gas Cylinder Pigtail Hose - 200,000 Btu - Green Type I ACME x 1/4" MIF - 12" Long





Video of MEC RV Propane Pigtail Hose - ACME Nut x 1/4" Male Inverted Flare - 12" Long
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of MEC Propane Fittings - RV Propane Pigtail Hose 12 Inch - MEC35CR

Hi everybody, Andy here with etrailer. Let's take a quick look at this MEC RV propane pigtail hose. Now, this is a 12 inch long propane pigtail hose. It's designed to connect an RV propane cylinder to an automatic changeover regulator. If you have a typical two cylinder setup, you normally have one of these pigtails coming from the tank and feeding into your regulator. So you're only going to get one hose here.

So if you need more than one, make sure you adjust the quantity of your order. And on the propane side, you're going to get the green type one Acme nut. This hand wheel threads onto a compatible propane cylinder valve by hand, so you don't need a wrench for that connection. On the other end, you're going to have a quarter of an inch male inverted flare fitting, which needs to match up with a quarter of an inch female inverted flare inlet on your regulator. So as I mentioned again, this is going to be right at 12 inches long and it has a quarter of an inch inside diameter.

It can handle a propane flow of up to 200,000 BTU per hour. It has a working pressure rating of up to 350 PSIG. And this also has a 400 pound pull test rating. So that's a nice addition to it. This is a thermoplastic hose.

It's UL and CGA approved for propane service. I think that's going to wrap up our quick look today. Again, my name's Andy. Thank you for joining me.

Ratings & Reviews

5.0

1 reviews
5 Stars
(1)
4 Stars
(0)
3 Stars
(0)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
1
1
true

See what our Experts say about this MEC Propane Fittings


Info for this part was:

Employee Mary K
Edited by:
Mary K
Employee Matthew S
Updated by:
Matthew S
Employee Alex H
Written by:
Alex H
Employee Evangeline M
Installed by:
Evangeline M
Employee Andy C
Installed by:
Andy C
Employee Joshua U
Video by:
Joshua U

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924