Your high-demand RV propane equipment needs enough fuel to operate properly. If a standard pigtail restricts that flow, this 400,000 Btu/hr hose connects your cylinder to the regulator without becoming the bottleneck.
You've installed high-demand propane equipment, but the pigtail feeding the regulator can still become the restriction. If it doesn't support the flow your system requires, your equipment isn't getting the propane supply it needs. This high-flow pigtail supports up to 400,000 Btu/hr between the cylinder and regulator, so the hose doesn't become the bottleneck in a compatible high-demand system.
If something fails downstream and propane begins flowing faster than it normally would, you're dealing with an uncontrolled release of flammable gas. The built-in excess-flow feature restricts that flow. If fire exposes the cylinder connection to extreme heat, the built-in thermal link adds another layer of protection.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with E-Trailer. Let's take a quick look at this MEC high flow RV propane pigtail hose. Now, this is a 12-inch-long high flow propane pigtail for an RV propane system. This job is going to be pretty straightforward. This is going to connect the propane cylinder to your regulator, but it's specifically intended for systems that need more propane flow than a standard pigtail may be able to provide.
The main thing that sets this apart is its 400,000 BTU per hour flow capacity. So if an RV has high demand propane equipment, this pigtail can potentially become, a pigtail, rather, can potentially become a restriction. So this hose is designed to provide that higher flow so a compatible system can get the propane supply that it needs. Connection-wise, this end here has the type one QCC acme nut for connecting to the propane cylinder, while the other end here has a quarter of an inch male inverted flare for the regulator. This hose is made from high pressure thermoplastic.
It has brass ferrules and a quarter of an inch inside diameter. It's rated for 350 PSIG working pressure. It's also listed as RVIA and NFPA 1192 compliant. There are a couple built-in protection features worth knowing about. An excess flow feature is designed to restrict propane flow if something downstream fails and causes an unusually high uncontrolled flow of gas.
There's also a thermal link at the cylinder connection that provides an additional safeguard if that connection is exposed to extreme heat or fire. I think that's going to wrap up our look today. Again, my name's Andy. Thank you for joining me.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.